Hobie

Hobie

599 products

    All Hobie OEM parts.  Sails to rudders, trampolines to batten caps.

    599 products
    Hobie Stainless Steel Roller Furler Sleeve Murrays Part# 50-61950001 Hobie Roller Furler Sleeve is a Hobie factory replacement stainless steel roller furler sleeve. Hobie Part# 61950001
    HOBIE ROLLER FURLER SLEEVE (SS)
    Hobie
    Getaway Comptip Murrays Part# 50-37611100 Hobie Getaway CompTip factory replacement CompTip for Getaway is a special order item. A CompTip is the upper section of a Hobie mast built in and after 1986. Fiberglass and non-conductive, it was designed to prevent electrocution by contact with a high power line.
    HOBIE GETAWAY COMPTIP
    Hobie
    H18 Halyard Lock (Comptip) Murrays Part# 50-61610101 Halyard hook for Hobie 18 comptip mast assembly. Hobie Part# 61610101
    H-18 HALYARD HOOK (COMPTIP)
    Hobie
    H20 Gudgeon Murrays Part# 50-40101301 Hobie 20 replacement gudgeon for the Hobie® 20. Use #12-24 x 1" PPHMS-P screws and 12-24 nylock hex nuts. Hobie Part# 40101301
    H-20 GUDGEON
    Hobie
    Out of Stock
    H16 Gudgeon Casting Murrays Part# 50-50102011 Standard on current production Hobie 16s, these die cast aluminum gudgeons are now available for your Hobie 16. Their one piece construction and plastic bushed pin holes guarantee pin hole alignment, reducing rudder pin wear, slop and drag. Die cast aluminum construction Standard on all Hobie 16 catamarans Uses 8x #8030402 screw for installation (sold separately)
    H-16 GUDGEON CASTING
    Hobie
    H16 Dolphin Striker Post Murrays Part# 50-20140001 Hobie® factory replacement dolphin striker post fits all Hobie® 16 mast steps (older and newer)
    H-16 DOLPHIN STRIKER POST
    Hobie
    Detent Plunger EZ Lock System Murrays Part# 50-20492021 Hobie Cat® factory detent plunger for EZ Loc rudder assembly. Hobie Bravo, Getaway and Wave Hobie Part# 20492021
    BRAVO/WAVE/GETAWAY DETENT PLUNGER EZ LOC SYSTEM
    Hobie
    H18 Compression Sleeve Murrays Part# 50-61490000 Hobie® factory replacement compression sleeve for mast of Hobie 18.
    H-18 COMPRESSION SLEEVE
    Hobie
    Block Hanger H20 Murrays Part# 50-40760001 Hobie® factory replacement block hanger for Hobie® 20. Hobie part# 40760001
    H-20 BOOM BLOCK HANGER
    Hobie
    H18 Jib Furler Bearing (Cage) Murrays Part# 50-61930000 Hobie® factory replacement bearing cage for Hobie® roller furler drum #50-61900000. Hobie Part# 61930000
    H-18 JIB FURLER BEARING (CAGE)
    Hobie
    Tracker Hinge Upright Murrays Part# 007-1054 The standard replacement hinge upright for the tracker on all Hobie® 14, 16 and newer 17's. Fits: Hobie Getaway Main Traveler Car Hobie Cat® Part# 11840100
    TRACKER UPRIGHT HINGE
    Hobie
    TRACKER HINGE PIN
    Hobie
    Out of Stock
    Tracker: Bottom Roller (Post-1993) Murrays Part# 007-0112 Bottom roller with rivets for the tracker car on 1993 and later Hobie® 14, 16 and 17 's. This part allows you to rebuild your existing Hobie Traveler car by just replacing the track rollers and keeping the top half. This part can be installed on older boats if the matching Deep Track is installed as well. Fits Hobie Getaway Traveler Car. Hobie Cat Part# 112
    TRACKER BOTTOM ROLLER (POST 93)
    Hobie
    Out of Stock
    ROLLER FURLING DRUM REBUILT
    Hobie
    Save $129
    Out of Stock
    Wave Batten Set Murrays Part# 50-38016001 Complete batten set for the Hobie Wave sailboat. Includes battens 1-5 in the correct lengths for your Wave mainsail.
    WAVE BATTEN SET
    Hobie
    Screw FHSMS #8 X 3/4 Stainless Steel Murrays Part# 19-1621 Flat head, self tapping, stainless steel sheet metal screw #8 x 3/4" Compare to Hobie Part 8031501 Used to mount swivel jam cleat and Jib Car Stop
    SCREW FHSMS #8 X 3/4" (SS)
    Hobie
    H-18SX/21 WING END CASTING
    Hobie
    H-14/16 LOWER RUDDER CASTING-USED
    Hobie
    MASTHEAD SHEAVE PIN
    Hobie
    Sale
    H14/16 Clear Anodized Aft Boom End Cap Murrays Part# 10741031 Replacement rear boom end cap for Hobie® 14 or 16 is Hobie® factory item #10741031. Use two 6-6 rivets (#19-5032) for installation. Hobie Part# 10741031
    H-14/16 CLEAR ANODIZED AFT BOOM END CAP
    Hobie
    Save $6.99
    Out of Stock
    H20 Jib Halyard Swivel Toggle Murrays Part# 50-41880001 Hobie® factory replacement jib halyard toggle for Hobie® 20 Miracle.
    H-20 JIB HALYARD SWIVEL TOGGLE
    Hobie
    Out of Stock
    H18 Dead Eye Traveler Murrays Part# 50-61060001 Hobie® factory replacement traveler deadeye for Hobie 18 rear crossbar.
    H-18 DEAD EYE TRAVLER
    Hobie
    Out of Stock
    H-18SX WING STRUT
    Hobie
    Getaway Wing Mesh Trampoline-Turquoise Murrays Part# 50-37971058
    GETAWAY WING MESH TRAMPOLINE-TURQUOISE
    Hobie
    SPINNAKER POLE MOUNT
    Hobie
    TIGER DELRIN SCREWS
    Hobie
    Hobie 8080581 Hobie factory replacement 3/8" lock washer is used on Hobie 18 front and rear inboard support castings.
    WASHER LOCK 3/8"
    Hobie
    Out of Stock
    H16 E-Clip Gooseneck Murrays Part# 50-8062521 Hobie® factory replacement E-clip for gooseneck on Hobie® 16. The E-clip fits old-style boom pin that is grooved. Hobie Part# 8062521
    H-16 E-CLIP GOOSENECK
    Hobie
    Nut 3/8-16 HX Nylock-LP Murrays Part# 50-8050540
    NUT 3/8-16" HX NYLOCK-LP
    Hobie
    Out of Stock
    Nut Nylock 3/8-24 Murrays Part# 50-8050511 Replacement 3/8-24 nylock nut is used on Hobie® 14, 16 and 18 dolphin striker rods, as well as Hobie® 17 inboard support. Hobie Part# 8050511
    NUT NYLOCK 3/8-24"
    Hobie
    Nut 10-32 Nylock Low Profile Murrays Part# 50-8050211 Hobie factory low-profile Nylock 10-32 nut as used on EZ-Loc rudder assembly. Hobie Part# 8050211
    NUT 10-32 NYLOCK LOW PROFILE
    Hobie
    Screw 3/8-16 x 4" PHMS-P Murrays Part# 50-8040600 This screw is for holding the wing side leg brace. Hobie Part# 8040600
    SCREW 3/8-16 x 4" PHMS-P
    Hobie
    Bolt Socket Head 3/8-16 X 2.50" Murrays part# 50-8040521 Hobie® factory replacement 3/8-16 x 2.50" socket head bolt is used on Getaway wing and Hobie® 18 rear inboard support. Hobie Part# 8040521
    BOLT 3/8-16 X 2.50"
    Hobie
    Bolt 3/8-16 X 2" Murrays Part# 50-8040501 Replacement stainless steel 3/8-16 x 2" bolt is used on Hobie® 18 front and rear crossbars. Hobie Part# 8040501
    BOLT 3/8-16 X 2"
    Hobie
    Out of Stock
    Bolt 5/16-18 x 2-3/4" HX HD Murrays Part# 50-8040391 EZ Loc upper rudder bolt for Hobie Bravo, Getaway and Wave  Hobie Part# 8040391
    BOLT 5/16-18 x 2-3/4" HX HD
    Hobie
    Bolt 3/8-16 X 5" 50-8040061 Hobie® factory 3/8-16 x 5" bolt is used on Hobie 20 Miracle front crossbar. Hobie Part# 8040061
    BOLT 3/8-16 X 5"
    Hobie
    Screw 1/4/20x1.25" PHPMS Murrays Part# 50-8032061 Rear Hatch Screw for Hobie Bravo. Hobie Part# 8032061
    SCREW 1/4/20x1.25" PHPMS
    Hobie
    Screw ES Soc Cap 5/16-18 X 1" Murrays Part# 50-8031781 5/16"-18 x 1" soc head screw as used on Hobie® kayaks Hobie Part# 8031781
    SCREW E/S SOC 5/16-18 X 1"
    Hobie
    Screw #10 x 1/2 PHSMS-P Murrays Part# 50-8031151 Hobie Part# 8031151
    SCREW #10X1/2" PHSMS-P
    Hobie
    Screw 1/4-20 x 1" THMS-P SS Murrays Part# 50-8030701 Hobie® factory replacement 1/4-20 x 1" stainless steel screw. Used on Hobie® pre-EZ-Loc rudder system, tendon tiller connector, rudder adjuster, Hobie 20 shroud anchor plate. Applications: H18/ Hobie 18 SX Rudder Adjuster Screw: 1 Compare to Hobie Part# 8030701
    SCREW STAINLESS STEEL 1/4-20x1"
    Hobie
    Recently viewed