Hobie

Hobie

610 products

    All Hobie OEM parts.  Sails to rudders, trampolines to batten caps.

    610 products
    Roller Furling Darby Ring (Small) Murrays Part# 50-8062501 Hobie® factory replacement small Darby ring for roller furler. Hobie Part# 8062501
    ROLLER FURLING DARBY RING (SMALL)
    Hobie
    H14 Mast Spinnaker Tang Murrays Part# 50-10690000 Hobie® factory replacement spinnaker tang or mast tang for Hobie 14 or Wave. Use six 6-4 rivets (#19-5031) and six 6-4 casings (#19-5020) for installation.
    HOBIE 14/WAVE MAST TANG
    Hobie
    Out of Stock
    H14/Wave Mast Base Murrays Part# 50-10640011 Hobie® factory replacement black mast base for Hobie® 14 or Wave. Use four 6-6 rivets (#19-5032) for installation.    
    H-14/WAVE MAST BASE
    Hobie
    Out of Stock
    Jib Traveler Car Plate Only Murrays Part# 50-2524001 Hobie® factory replacement jib traveler car plate. Can be used on port or starboard side of the boat.
    JIB TRAVELER CAR PLATE ONLY
    Hobie
    Out of Stock
    H16 Mesh Trampoline- Turquoise Murrays Part# 50-20970058 Mesh trampoline for the Hobie 16 with a double grommeted center section. Reinforced in high load areas, has super duty grommets and comes complete with line pockets and built in hiking straps. Note that this trampoline requires a longer lacing line than older models. Includes aft lacing strip. Lacing line is sold separately. Heat-welding lasts longer in the sun than trampolines that are stitched at the seams. Mesh allows wind and water t
    H-16 MESH TRAMPOLINE-TURQUOISE
    Hobie
    Out of Stock
    Eyelet Post H20 Murrays Part# 50-41220001 The Eyelet Post H20 Hobie® factory replacement eyelet post for Hobie® 20 rear crossbar. This item replaces tie button for Inter cats #56-9882. Fits Hobie Getaway Rear Crossbar
    H-20 EYELET POST
    Hobie
    H18 Dolphin Striker Post Murrays Part# 50-60140001 Replacement dolphin striker post for the Hobie 18 sailboat. Hobie Part# 60140001
    H-18 DOLPHIN STRIKER POST
    Hobie
    Out of Stock
    HOBIE TRACKER CAR COMPLETE NEW (POST93)
    Hobie
    Out of Stock
    H16 Mast Head Sheave Pin  Hobie Part# 50-10630001 This is a hollow rivet for installing the Hobie 16 masthead sheave on an all aluminum mast, large pulley masthead. Requires special tools or creative minded sailor to improvise their own installation method
    H-16 MAST HEAD SHEAVE PIN
    Hobie
    H14 Masthead Sheave The Hobie 14 Mast head sheave - Old Style is the large plastic pulley sheave. Replacement for the sheave in the original all aluminum Hobie 14 mast that has a single large sheave in the mast head. Hobie 14 pre comptip masthead sheave. Measures 4" x 3/8" with a 3/8" hole. ​Requires a 3/8" x 1.5" clevis pin or bolt to install or the 51-14041713 Mast Head Sheave Pin. Hobie part number 14041712
    H-14 MASTHEAD SHEAVE
    Hobie
    Hobie factory replacement long lock screw for EZ Loc rudder system. Specs: 12-24X3/4 long lock PHMS screw Hobie PN 8030411
    EZ LOC LONG SCREW
    Hobie
    Hobie Diamond Decal 36" Hobie diamond hull decal in Silver/Gray. Available in Silver/Grey and Turquoise/Silver. Use this page to order product numbers: 50-12451031 Turquoise 50-12451061 Silver
    HOBIE DIAMOND DECAL
    Hobie
    H16 Mainsail (White) Murrays Part# 50-20991011 This is an OEM White Mainsail from Hobiecat. This includes a basic Hobie sail bag and batten ties. This is class legal for Hobie One Design Racing. Hobie Part# 20991011
    H-16 MAINSAIL (WHITE)
    Hobie
    Getaway Assembly Manual Murrays Part# 50-37450011 Hobie factory assembly manual for the Getaway.
    GETAWAY ASSEMBLY MANUAL
    Hobie
    Comptip Cap Plug Murrays Part# 50-8090900 This part is used to seal the hole in the Comptip of a Hobie cat after the expanding foam has been put in. Hobie Part# 8090900
    COMP-TIP CAP PLUG
    Hobie
    HOBIE HALYARD SHACKLE Replacement Hobie halyard shackle for Hobie cat main halyards. Used on the Hobie Wave, Getaway, 14, and 16. The keeper pin is contained so you can't drop the pin in the water or sand and loose it. Hobie part number 10670000
    HOBIE HALYARD SHACKLE
    Hobie
    H-20/WAVE DRAIN PLUG WITH WASHER
    Hobie
    Harken Cleat Adapter with Hardware Murrays Part# 007-50010 Hobie Factory Part 50010
    CLEAT ADAPTER PLATE WITH HARDWARE
    Hobie
    Out of Stock
    Hobie EZ Loc Lower Rudder Housing Tube Rivet Murrays Part# 50-50313301 Rivet for the lower rudder housing on Hobie Bravo, Getaway and wave EZ Loc Systems.  Hobie Part# 50313301
    HOBIE EZ LOC LOWER RUDDER HOUSING TUBE RIVET
    Hobie
    Out of Stock
    Hobie EZ Loc Rudder Housing 50-50313001 EZ Loc Rudder Housing for Hobie Bravo EZ Loc Rudder Housing for Hobie Getaway EZ Loc Rudder Housing for Hobie Wave Hobie part number 50313001 Fits Hobie Wave and Hobie Bravo and Hobie Getaway
    HOBIE EZ LOC RUDDER HOUSING
    Hobie
    Getaway Bow Spreader Murrays Part# 50-37500001 Bow spreader for the Hobie Getaway. Compatible with all Getaway model years up to and including 2016. For 2017 and newer boats, order 37501701. Black anodized aluminum finish For Getaway model years up to and including 2016
    GETAWAY BOW SPREADER
    Hobie
    H-14/16 FOAM PLUG FOR PYLON
    Hobie
    TILLER ARM SWIVEL END CAP Hobie factory tiller arm swivel end cap for Hobie 20 Miracle rudder system 1953. Hobie part number 40650001
    Hobie 1953 tiller connection kit - new style
    TILLER ARM END CAP SWIVEL
    Hobie
    TILLER ARM INSERT Hobie factory tiller arm insert for 1953 tiller kit. Hobie part number 40660001. Murrays.com In stock
    HOBIE TILLER ARM INSERT
    Hobie
    Screw H20 Connector 10-24 X .25" Murrays Part# 50-8032401 Hobie® factory replacement screw for Hobie 20 tiller connector. Stainless steel 10-24 x 1/4" pan-head machine screw with Phillips head. Hobie Part# 8032401
    H-20 CONNECTOR SCREW 10X24X.25"
    Hobie
    Getaway Luff Track Murrays Part# 50-37611151 Replacement luff track for the Hobie Getaway. 102" Hobie Part# 37611150, 37611151
    GETAWAY LUFF TRACK
    Hobie
    H18 Halyard Lock (Comptip) Murrays Part# 50-61610101 Halyard hook for Hobie 18 comptip mast assembly. Hobie Part# 61610101
    H-18 HALYARD HOOK (COMPTIP)
    Hobie
    Out of Stock
    H16 Jib Car Slide Only with Wheels Hobie factory jib car slide for Hobie 16 with integrated jib track (standard equipment since late 2005). Hobie part number 25243003
    H-16 JIB CAR SLIDE ONLY WITH WHEELS
    Hobie
    Out of Stock
    Detent Plunger EZ Lock System Murrays Part# 50-20492021 Hobie Cat® factory detent plunger for EZ Loc rudder assembly. Hobie Bravo, Getaway and Wave Hobie Part# 20492021
    BRAVO/WAVE/GETAWAY DETENT PLUNGER EZ LOC SYSTEM
    Hobie
    Out of Stock
    H16 Insignia Decal Murrays Part# 50-22330000 Hobie® 16 sail class insignia decal is a Hobie® factory replacement item.
    H-16 INSIGNIA DECAL
    Hobie
    Comp-Tip Mast Head Sheave for H16 Wave Murrays Part# 50-20614210 CompTip Mast Head Sheave for Hobie 16 or Wave, is the sheave found at the top of the comptip assembly. Two sheaves are used in each assembly. The sheaves each ride on a, comptip sheave spacer. The sheave is 9/16" wide x 2 1/4" diameter with 3/8" hole. The larger sheave for the obsolete mast head for all-aluminum mast is no longer available. Hobie Part number 20614210
    H-16/WAVE COMP-TIP MAST HEAD SHEAVE
    Hobie
    Out of Stock
    Comp-Tip Mast Head H16 Murrays Part# 50-20614001 Hobie® factory replacement mast head with sheaves. Use four #19-5032 6-6 rivets for installation. This is the standard Hobie Part that comes with all comptip masts on Hobie 16s. This CompTip mast head also replaces the obsolete Hobie 16 mast head (no longer available) for all-aluminum mast. The original halyard will work if you move the halyard hook down to the appropriate height. Alternatively, a new comptip halyard #02-0273-60
    H-16 COMP-TIP MAST HEAD
    Hobie
    Out of Stock
    H16 Comp Tip Luff Track Murrays Part# 50-20616001 Hobie® factory replacement 93" luff track for Hobie® 16 with CompTip on mast.
    H-16 COMP-TIP LUFF TRACK
    Hobie
    Out of Stock
    Block Hanger H20 Murrays Part# 50-40760001 Hobie® factory replacement block hanger for Hobie® 20. Hobie part# 40760001
    H-20 BOOM BLOCK HANGER
    Hobie
    H18 Jib Furler Bearing (Cage) Murrays Part# 50-61930000 Hobie® factory replacement bearing cage for Hobie® roller furler drum #50-61900000. Hobie Part# 61930000
    H-18 JIB FURLER BEARING (CAGE)
    Hobie
    Out of Stock
    Tracker Car Complete (Pre-1994) Murrays Part# 007-1050 This tracker car is the standard replacement part for all 1993 and earlier Hobie® 14, 16 and 17 main tracker traveler assemblies. Includes 2-3 rivets where required. Hobie Cat® factory item #105.
    TRACKER CAR COMPLETE (PRE'94)
    Hobie
    Out of Stock
    Mast Float Mama Getaway Murrays Part# 007-30119
    MAST FLOAT MAMA GETAWAY
    Hobie
    Out of Stock
    TILLER XBAR GETAWAY os
    Hobie
    Out of Stock
    ROLLER FURLING DRUM REBUILT
    Hobie
    Save $80
    Out of Stock
    H-17/18/20, GETAWAY AND WAVE LOWER RUDDER CASTING-USED
    Hobie
    Save $120
    Recently viewed