Hobie

Hobie

613 products

All Hobie OEM parts. Sails to rudders, trampolines to batten caps.

613 products

Sort

Rescue Step - Boat

HOBIE WAVE SAIL BAG

Hobie Miracle 20 Bridle

Wave Batten Set

Murrays Part# 50-38016001

Complete batten set for the Hobie Wave sailboat. Includes battens 1-5 in the correct lengths for your Wave mainsail.

WAVE BATTEN SET

H-18SX/21 WING END CASTING

H-16 FRONT CROSSBAR WITH CASTINGS-USED

HALYARD CLEAT (10 PACK)

H18 Mast Step Kit

Murrays Part# 50-60180011

Hobie® factory replacement mast step kit for Hobie® 18 includes mast step casting, post, bearing, screw and washer.

This is an upgrade for older Hobie 18's with threaded post.

H-18 MAST STEP KIT

H18 Shroud Anchor Plate Kit

Murrays Part# 50-64100001

The Shroud Anchor Plate Kit H18 is the Hobie® factory replacement shroud anchor plate kit for Hobie 18.

Applications:

This kit is also used to re-enforce the crossbar bolts on Hobie 18s with wings or the lighter H18 boats that were built from 1984-1988.

H-18 SHROUD ANCHOR PLATE KIT

H20 Jib Halyard Swivel Toggle

Murrays Part# 50-41880001

Hobie® factory replacement jib halyard toggle for Hobie® 20 Miracle.

H-20 JIB HALYARD SWIVEL TOGGLE

H18 Dead Eye Traveler

Murrays Part# 50-61060001

Hobie® factory replacement traveler deadeye for Hobie 18 rear crossbar.

H-18 DEAD EYE TRAVLER

H-18SX WING STRUT

TIGER DELRIN SCREWS

Washer Flat 1/2 X 7/8

Murrays Part# 50-8080601

Hobie® factory replacement 1/2" x 7/8" washer.

Hobie Part# 8080601

WASHER FLAT 1/2 X 7/8"

Nut Nylock 3/8-24

Murrays Part# 50-8050511

Replacement 3/8-24 nylock nut is used on Hobie® 14, 16 and 18 dolphin striker rods, as well as Hobie® 17 inboard support.

Hobie Part# 8050511

NUT NYLOCK 3/8-24"

NUT 10-32 NYLOCK LOW PROFILE

Nut Stainless Steel 1/4-20" Centerlock

Murrays Part# 50-8050121

NUT STAINLESS STEEL 1/4-20" CENTERLOCK

NUT NYLOCK LOW PROFILE 1/4-20"

Screw 3/8-16 x 4" PHMS-P

Murrays Part# 50-8040600

This screw is for holding the wing side leg brace.

Hobie Part# 8040600

SCREW 3/8-16 x 4" PHMS-P

Bolt 3/8-16 X 2"

Murrays Part# 50-8040501

Replacement stainless steel 3/8-16 x 2" bolt is used on Hobie® 18 front and rear crossbars.

Hobie Part# 8040501

BOLT 3/8-16 X 2"

Bolt 5/16-18 x 2-3/4" HX HD

Murrays Part# 50-8040391

EZ Loc upper rudder bolt for Hobie Bravo, Getaway and Wave 

Hobie Part# 8040391

BOLT 5/16-18 x 2-3/4" HX HD

Bolt 5/16 X 18 X3.5"

Murrays Part# 50-8040371

Hobie® factory replacement 5/16-18 x 3-7/16" bolt. Pylon bolt for Hobie® 14 and older 16 (1994 and prior; starting in 1995, boats had newer style castings/pylons).

Hobie Part# 8040371

BOLT 5/16 X 18 X3.5"

Bolt 3/8-16 X 5"

50-8040061

Hobie® factory 3/8-16 x 5" bolt is used on Hobie 20 Miracle front crossbar.

Hobie Part# 8040061

BOLT 3/8-16 X 5"

Screw 1/4/20x1.25" PHPMS

Murrays Part# 50-8032061

Rear Hatch Screw for Hobie Bravo.

Hobie Part# 8032061

SCREW 1/4-20x1.25" PHPMS

Screw #14 X 3/4 PHSMS

Murrays Part3 50-8031891

Hobie® factory replacement #14 x 3/4" pan head self-tapping sheet metal screw with Phillips head.

Hobie Part# 8031891

SCREW #14 X 3/4" PHMS

Screw #10 x 1/2 PHSMS-P

Murrays Part# 50-8031151

Hobie Part# 8031151

SCREW #10X1/2" PHSMS-P

Screw 1/4-20 X 3/8 RHMS-P

Murrays Part# 50-8030711

Hobie® factory replacement 1/4-20 x 3/8" stainless steel round head machine screw with Phillips head. Use two on Hobie® 20 jib car.

Hobie Part# 8030711

SCREW 1/4-20 X 3/8" RHMS-P

Screw #10 x 1-1/4 PHSMS-P

Murrays Part# 50-8030261

Tiller Hinge Screw for Hobie Fiberglass Tiller.

SCREW #10 x 1-1/4 PHSMS-P

Clevis Pin 5/16 X 2.2" Upper

Murrays Part# 50-8020101

Hobie® factory replacement 5/16" diameter x 2.2" clevis pin

CLEVIS PIN 5/16 X 2.2" UPPER

Rivet 3/16 x 5/16 Aluminum
Murrays Part# 50-8010071
Hobie® factory aluminum 3/16" x 5/16" rivet. A rivet tool is required for installation.

RIVET 3/16X 5/16 ALUMINUM

Rivet 4-8 CSK Aluminum

Murrays Part# 50-8010051

Rivet pop 1/8x1/2 -AL

Hobie Part# 8010051 or 8010050

RIVET 4-8 CSK ALUMINUM

H17 Slide Slug

Murrays Part# 50-50504101

 Slide  Slug attaches to the sail and fits the boom track

Big slug for smooth action
Stainless steel bail makes sail attachment simple
Molded in weld gives maximum strength

H-17 SLIDE SLUG

Getaway Forward Crossbar End Cap

Murrays Part# 50-37151041

Replacement forward cross bar end cap for Hobie Getaway.

Sold individually

Hobie Part# 37151041

GETAWAY FORWARD CROSSBAR END CAP

Washer Flat 1/4 x 5/8"

Murrays Part# 50-8080521

Hobie® factory replacement 5/8" x 9/32" flat washer is used on Hobie 18 mast step assembly.

Hobie Part# 8080521

WASHER FLAT 1/4 X 5/8"

HOBIE 18 MAIN SAIL - WHITE

White Hobie 18 main sail from Hobie.  Discontinued product, limited availability.

Hobie part number 60991011

H-18 MAINSAIL (WHITE)

H14 Mesh Trampoline-Grey

Murrays Part# 50-10970059

H-14 MESH TRAMPOLINE-GREY

MAST STEP H18 BK

H14/18 Jib Luff Zipper

Murrays Part# 50-62300000

Hobie® factory jib luff zipper for Hobie 14 or 18.

Hobie Part# 62300000

H-14/18 JIB LUFF ZIPPER

Wave Club Traveler Kit

Murrays Part# 50-39250000

The Hobie Wave Main Traveler Kit is the Hobie factory main traveler kit for Club Wave includes track, Ronstan cleat, traveler car, mounting plate and rivets.

WAVE CLUB TRAVELER KIT

Hobie Wave Jib- Orange

Murrays Part# 50-38992072

Description:

Orange jib for the Hobie Wave catamaran.

Orange 6 oz heavy duty Dacron sailcloth
25 square foot sail area

Hobie Part# 38992072

WAVE JIB SAIL (ORANGE)

Previous 1 … 7 8 9 10 11 … 16 Next

Recently viewed

Hobie