Hobie

Hobie

610 products

    All Hobie OEM parts.  Sails to rudders, trampolines to batten caps.

    610 products
    H18/20 Gooseneck Yoke Murrays Part# 50-60710000 Hobie® factory replacement gooseneck yoke for Hobie 18 and 20. Hobie Part# 60710000
    H-18/20 GOOSENECK YOKE
    Hobie
    Out of Stock
    HOBIE 20 DOWNHAUL SHEAVE - 40700541 Hobie factory replacement downhaul sheave for Hobie® 20 mast. UV-stabilized.   SPECS: 1/2" wide by 1 5/32" diameter, 1/4' hole.
    H-20 DOWNHAUL SHEAVE
    Hobie
    H16 Dolphin Striker Post Murrays Part# 50-20140001 Hobie® factory replacement dolphin striker post fits all Hobie® 16 mast steps (older and newer)
    H-16 DOLPHIN STRIKER POST
    Hobie
    H18 Compression Sleeve Murrays Part# 50-61490000 Hobie® factory replacement compression sleeve for mast of Hobie 18.
    H-18 COMPRESSION SLEEVE
    Hobie
    H18 Boom Outhaul Car Assembly Murrays Part# 50-60220001 Hobie® factory replacement outhaul car assembly for Hobie® 18. Outhaul and shock cord are not included. For outhaul line, order 7' of 3/16" black line #39-2311BK. For outhaul shock cord, order 7' of #39-7491 black 1/4" shock cord.
    H-18 BOOM OUTHAUL CAR ASSEMBLY
    Hobie
    Out of Stock
    H14/16 Boom End Cap AFT Murrays Part# 50-10741031 Replacement rear boom end cap for Hobie® 14 or 16. Use two 6-6 rivets (#19-5032) for installation. Hobie® Part# 10741031
    H14/16 AFT BOOM END CAP
    Hobie
    Out of Stock
    Tracker: Bottom Roller (Post-1993) Murrays Part# 007-0112 Bottom roller with rivets for the tracker car on 1993 and later Hobie® 14, 16 and 17 's. This part allows you to rebuild your existing Hobie Traveler car by just replacing the track rollers and keeping the top half. This part can be installed on older boats if the matching Deep Track is installed as well. Fits Hobie Getaway Traveler Car. Hobie Cat Part# 112
    TRACKER BOTTOM ROLLER (POST 93)
    Hobie
    Out of Stock
    Rescue Step - Boat
    Hobie
    Out of Stock
    HOBIE WAVE SAIL BAG
    Hobie
    Save $7.04
    Out of Stock
    Hobie Miracle 20 Bridle
    Hobie
    Save $45
    WAVE TILLER CROSSBAR M20 STYLE Hobie PN 39521001
    HOBIE WAVE TILLER CROSSBAR M20 STYLE
    Hobie
    Sale
    Hobie 14 and Early Wave Mast Step
    Hobie
    Save $14.95
    Out of Stock
    Wave Batten Set Murrays Part# 50-38016001 Complete batten set for the Hobie Wave sailboat. Includes battens 1-5 in the correct lengths for your Wave mainsail.
    WAVE BATTEN SET
    Hobie
    H-18SX/21 WING END CASTING
    Hobie
    H-14/16 LOWER RUDDER CASTING-USED
    Hobie
    Out of Stock
    HALYARD CLEAT (10 PACK)
    Hobie
    Out of Stock
    H18 Mast Step Kit Murrays Part# 50-60180011 Hobie® factory replacement mast step kit for Hobie® 18 includes mast step casting, post, bearing, screw and washer. This is an upgrade for older Hobie 18's with threaded post.
    H-18 MAST STEP KIT
    Hobie
    H17 Sport Spreader Pole End Cap Murrays Part# 50-52009001 Spreader pole end cap for Hobie 17 sport sailboat.
    H-17 SPORT SPREADER POLE END CAP
    Hobie
    Out of Stock
    H20 Jib Halyard Swivel Toggle Murrays Part# 50-41880001 Hobie® factory replacement jib halyard toggle for Hobie® 20 Miracle.
    H-20 JIB HALYARD SWIVEL TOGGLE
    Hobie
    Out of Stock
    H18 Dead Eye Traveler Murrays Part# 50-61060001 Hobie® factory replacement traveler deadeye for Hobie 18 rear crossbar.
    H-18 DEAD EYE TRAVLER
    Hobie
    Out of Stock
    H-18SX WING STRUT
    Hobie
    SPINNAKER POLE MOUNT
    Hobie
    TIGER DELRIN SCREWS
    Hobie
    Hobie 8080581 Hobie factory replacement 3/8" lock washer is used on Hobie 18 front and rear inboard support castings.
    WASHER LOCK 3/8"
    Hobie
    Nut 3/8-16 HX Nylock-LP Murrays Part# 50-8050540
    NUT 3/8-16" HX NYLOCK-LP
    Hobie
    Out of Stock
    Nut Nylock 3/8-24 Murrays Part# 50-8050511 Replacement 3/8-24 nylock nut is used on Hobie® 14, 16 and 18 dolphin striker rods, as well as Hobie® 17 inboard support. Hobie Part# 8050511
    NUT NYLOCK 3/8-24"
    Hobie
    Nut 10-32 Nylock Low Profile Murrays Part# 50-8050211 Hobie factory low-profile Nylock 10-32 nut as used on EZ-Loc rudder assembly. Hobie Part# 8050211
    NUT 10-32 NYLOCK LOW PROFILE
    Hobie
    Out of Stock
    Nut Nylock Lo-Pro 1/4-20 Murrays Part# 50-8050101 Hobie® factory replacement low profile 1/4-20 nylock nut. Used on Hobie 14 and 16 gooseneck assembly. Hobie Part# 8050101
    NUT NYLOCK LOW PROFILE 1/4-20"
    Hobie
    Screw 3/8-16 x 4" PHMS-P Murrays Part# 50-8040600 This screw is for holding the wing side leg brace. Hobie Part# 8040600
    SCREW 3/8-16 x 4" PHMS-P
    Hobie
    Bolt 3/8-16 X 2" Murrays Part# 50-8040501 Replacement stainless steel 3/8-16 x 2" bolt is used on Hobie® 18 front and rear crossbars. Hobie Part# 8040501
    BOLT 3/8-16 X 2"
    Hobie
    Out of Stock
    Bolt 5/16-18 x 2-3/4" HX HD Murrays Part# 50-8040391 EZ Loc upper rudder bolt for Hobie Bravo, Getaway and Wave  Hobie Part# 8040391
    BOLT 5/16-18 x 2-3/4" HX HD
    Hobie
    Bolt 5/16 X 18 X3.5" Murrays Part# 50-8040371 Hobie® factory replacement 5/16-18 x 3-7/16" bolt. Pylon bolt for Hobie® 14 and older 16 (1994 and prior; starting in 1995, boats had newer style castings/pylons). Hobie Part# 8040371
    BOLT 5/16 X 18 X3.5"
    Hobie
    Bolt 3/8-16 X 5" 50-8040061 Hobie® factory 3/8-16 x 5" bolt is used on Hobie 20 Miracle front crossbar. Hobie Part# 8040061
    BOLT 3/8-16 X 5"
    Hobie
    Screw 1/4/20x1.25" PHPMS Murrays Part# 50-8032061 Rear Hatch Screw for Hobie Bravo. Hobie Part# 8032061
    SCREW 1/4-20x1.25" PHPMS
    Hobie
    Screw ES Soc Cap 5/16-18 X 1" Murrays Part# 50-8031781 5/16"-18 x 1" soc head screw as used on Hobie® kayaks Hobie Part# 8031781
    SCREW E/S SOC 5/16-18 X 1"
    Hobie
    Screw #10 x 1/2 PHSMS-P Murrays Part# 50-8031151 Hobie Part# 8031151
    SCREW #10X1/2" PHSMS-P
    Hobie
    Screw 8-32 X 3/8" THMS Roller Furler Drum Murrays Part# 50-8030501 Hobie® factory replacement 8-32 x 3/8" screw for roller furler drum. Hobie Part# 8030501
    SCREW 8-32X3/8" THMS
    Hobie
    Out of Stock
    Clevis Pin 5/16 X 2.2" Upper Murrays Part# 50-8020101 Hobie® factory replacement 5/16" diameter x 2.2" clevis pin
    CLEVIS PIN 5/16 X 2.2" UPPER
    Hobie
    Rivet 3/16 x 5/16 Aluminum Murrays Part# 50-8010071 Hobie® factory aluminum 3/16" x 5/16" rivet. A rivet tool is required for installation.
    RIVET 3/16X 5/16 ALUMINUM
    Hobie
    Out of Stock
    Rivet 4-8 CSK Aluminum Murrays Part# 50-8010051 Rivet pop 1/8x1/2 -AL Hobie Part# 8010051 or 8010050
    RIVET 4-8 CSK ALUMINUM
    Hobie
    Recently viewed