Hobie

Hobie

610 products

All Hobie OEM parts. Sails to rudders, trampolines to batten caps.

610 products

Sort

Black Mast Caution Decal

Murrays Part# 50-13440000

The Decal Mast Caution Black Hobie® factory caution decal attaches to mast as a reminder to watch for overhead power lines when sailing and/or launching your boat.

BLACK MAST CAUTION DECAL

Hobie Wave Mast Step Post (Threaded)

Murrays Part# 50-38170001

This part is used on the Hobie Wave to connect the mast ball to the mast step casting on the front crossbar. The older waves utilize an H14 mast step casting.

Hobie Part# 38170001

WAVE MAST STEP POST (THREADED)

Hobie® factory replacement part for Hobie 20-style tiller connector and adjuster kit (#07-1953). Hobie part number 40550001. Murrays.com - In stock

Hobie 1953 tiller connection kit - new style

HOBIE THREADED TILLER CONNECTOR END CAP 1953

H14 Mast Spinnaker Tang

Murrays Part# 50-10690000

Hobie® factory replacement spinnaker tang or mast tang for Hobie 14 or Wave. Use six 6-4 rivets (#19-5031) and six 6-4 casings (#19-5020) for installation.

HOBIE 14/WAVE MAST TANG

Hobie Boom Blocker Hanger 

Murrays Part# 50-10760000

Hobie factory boom block hanger for the Hobie 14, 16, 17 and 18.

Hole spacing is 1-1/8". 

Use four 6-4 rivets (#19-5031) for installation.

HOBIE BOOM BLOCKER HANGER

Batten Cap Main Luff (EA)

Murrays Part# 50-11322011

Main luff batten cap for Hobie Cats are sold individually. Order batten tie separately; 18" of line per batten cap is standard. Hobie® factory replacement part.

MAIN LUFF BATTEN CAP (EA)

NUT NYLOCK 5/16"-18 LOW PRO

Screw 12x24x1 Pan Head (Long Lock)

Murrays Part# 50-8030402

This screw is used to hold the rudder gudgeons on the back of the boat. 

Hobie Part# 8030402

SCREW 12x24x1 PAN HEAD (LONG LOCK)

Gooseneck Boom Pin

Murrays Part# 50-50502201

Hobie Cat gooseneck boom pin for securing boom assembly to mast at the gooseneck joint.

Hobie Part# 50502201

HOBIE GOOSENECK BOOM PIN

H16 Assembly Manual

Murrays Part# 50-23450000

Hobie Cat® factory manual for the Hobie 16®.

The manual is also available for free download at the Hobie Cat® Web site.

H-16 ASSEMBLY MANUAL

Hobie Wave Jib Cleat Bracket

Murrays Part# 50-38999002

Hobie Wave Jib Cleat Bracket is mounted to the inner side of the hull when adding a factory jib kit.

Hobie Part# 38999002

HOBIE WAVE JIB CLEAT BRACKET

H-20/WAVE DRAIN PLUG WITH WASHER

HOBIE HALYARD GRIP KIT

The Hobie Halyard grip kit is a mast hook that hold the jib halyard off center on the mast so that the jib battens don't hang up on the jib halyard when tacking. Mostly used on the Hobie 16.

Hobie part number 114

HOBIE HALYARD GRIP KIT

H16 Mesh Trampoline-Black

Murrays Part# 50-20970055

Hobie factory black mesh trampoline for Hobie 16 is heat-welded for easy maintenance and a long life. Heat-welding lasts longer in the sun than trampolines that are stitched at the seams. Mesh allows wind and water to pass through, so you're not sitting in a puddle. Includes halyard pocket. Legal for Hobie class racing.

Hobie Part# 50-20970058

H-16 MESH TRAMPOLINE-BLACK

Hobie EZ Loc Rudder Linkage

Murrays Part# 50-50313201

Replacement rudder linkage for Hobie EZ Loc style rudder assemblies.

 Hobie Bravo, Getaway and Wave

Hobie Part# 50313201

HOBIE EZ LOC RUDDER LINKAGE

Getaway Bow Spreader

Murrays Part# 50-37500001

Bow spreader for the Hobie Getaway. Compatible with all Getaway model years up to and including 2016. For 2017 and newer boats, order 37501701.

Black anodized aluminum finish
For Getaway model years up to and including 2016

GETAWAY BOW SPREADER

Hobie Wave Bow Spreader Tang

Murrays Part# 50-38120041

Replacement tang for Hobie Wave bow spreader.
Hobie Part# 38120041

WAVE BOW SPEADER TANG

Hobie factory replacement part for Hobie 20-style tiller connector and adjuster kit (#07-1953). Hobie part number 40540000 and 40540001. Murrays.com - in stock

Hobie 1953 tiller connection kit - new style

HOBIE THREADED TILLER CONNECTOR ADJUSTER

H18 Mast Base Casting-Black

Murrays Part# 50-60641031

Hobie® factory replacement black mast base casting for Hobie® 18. Use four #19-5032 rivets for installation.

H-18 MAST BASE CASTING-BLACK

Hobie Wave EZ Loc Rudder Assembly

Murrays Part# 50-39312000

EZ Loc rudder assembly for the Hobie Wave.

Hobie Part# 39312000

WAVE EZ LOC RUDDER ASSEMBLY

Screw FHSMS #8 X 3/4 Stainless Steel
Murrays Part# 19-1621
Flat head, self tapping, stainless steel sheet metal screw #8 x 3/4"
Compare to Hobie Part 8031501
Used to mount swivel jam cleat and Jib Car Stop

SCREW FHSMS #8 X 3/4" (SS)

Washer 5/16 X 9/16 Flat

Murrays Part# 50-8080181

Hobie Part# 8080181

WASHER FLAT 5/16 X 9/16"

Screw 10-32 X 1-1/4" PHMSP

Murrays Part# 50-8031071

SCREW 10-32 X 1-1/4" PHMSP

Clevis Pin 1/4 x .83"

Murrays Part# 50-8020391

Hobie® factory clevis pin measures 1/4" diameter x .8285" grip length (shoulder to the split ring hole).

CLEVIS PIN 1/4 X .83"

Rivet 6-18 Aluminum RIVET POP 3/16 x 1 1/8th inch aluminum rivet to hold the traveler control sheave on a H16 front crossbar from late 90s to current. Hobie Part Number 8011251

RIVET 6-18 ALUMINUM

H18/20 Outhaul Car Bearing Pin

Murrays Part# 50-60250000

This pin is used to hole the bearings on the traveler car for an H-18 or Miracle 20 beachcat. This pin has been discontinued by Hobie, this part meets or exceeds OEM quality and specification.

Compare to Hobie Part# 6025000

H-18/20 OUTHAUL CAR BEARING PIN

H16 Mainsail (White)

Murrays Part# 50-20991011

This is an OEM White Mainsail from Hobiecat. This includes a basic Hobie sail bag and batten ties. This is class legal for Hobie One Design Racing.

Hobie Part# 20991011

H-16 MAINSAIL (WHITE)

H20 Outhaul Bearing

Murrays Part# 50-40250001

Hobie® factory replacement outhaul bearing for Hobie 20. This part is installed into the outhaul car outside of the boom, it keeps the car from falling down into the car slot.

Hobie Part# 40250001

H-20 OUTHAUL BEARING

H14/16 Gooseneck Slide

Murrays Part# 50-10772001

Gooseneck slide for Hobie® 14 or 16 is a factory replacement part.

H-14/16 GOOSENECK SLIDE

H18SX Bracket Wing Strut

Murrays Part# 50-91490010

This is the bracket that the rear support arm of an H18SX wing uses. One is mounted to the wing and one is mounted to the rear hull of an H18SX per wing.

Hobie Part# 91490010

H-18SX BRACKET WING STRUT

Hobie Spreader Covers
Murrays part# 007-3262
These vinyl spreader bar end covers are real sail-savers! The black, smooth resilient covers protect the jib luff from wear and tear from cotter keys and sharp edges. Pair. Hobie Cat® factory item #3262.

HOBIE SPREADER COVERS

Hobie Getaway Forestay Yoke

Murrays Part# 50-37810030

This is part of the forestay assembly that hooks up to the main shackle on the mast.

Hobie Part# 37810030

GETAWAY FORESTAY YOKE

Soft Grip Standard Extension .570 x 11"

Murrays Part# 007-3206

This is a grip upgrade for the standard Hobie Tiller extension, it will also fit the Murrays fixed tiller extension as well.

Hobie Part# 3206

SOFT GRIP STANDARD EXTENSION .570 x 11"

Getaway Main Lacing Rod 64-3/4"

Murrays Part# 50-37880011

This is the lacing rod that is used to tension the main trampoline on the Hobie Getaway.

Hobie Part# 37880011

GETAWAY MAIN LACING ROD 64-3/4"

HOBIE WAVE EZ LOC TILLER CROSS BAR
Murrays PN 50-39524001
Hobie® factory replacement tiller crossbar assembly for Wave with EZ Loc rudder system.
Hobie part number 39524001

WAVE EASY LOC TILLER CROSS BAR

H18 Traveler Roller Skid

Murrays Part# 50-61810000

Hobie® factory replacement roller skid for Hobie® 18 main traveler.

Hobie 18 main traveler car parts list - 6180001, 8040301, 61870000, 61880000, 60190000, 8050311, 61842000, 8060121, 61810000, 61830000, 61852000, 8020431

H-18 TRAVELER ROLLER SKID

H18 Thru-Deck Fairlead

Murrays Part# 50-60270000

Fairlead Thru-Deck H18 for trapeze shock cord for skipper and crew trapeze lines that go through the lip on the outside of the hull.

Center hole on this fairlead is 7/8" diameter and is sleeved with a stainless steel ferrule. Mounting screw holes have a center-to-center measurement of 1-3/8". Hobie® factory replacement part.

Hobie Part# 60270000

H-18 THRU-DECK FAIRLEAD

H18 Dolphin Striker Post

Murrays Part# 50-60140001

Replacement dolphin striker post for the Hobie 18 sailboat.

Hobie Part# 60140001

H-18 DOLPHIN STRIKER POST

Comp-Tip Mast Head Sheave for H16 Wave
Murrays Part# 50-20614210
CompTip Mast Head Sheave for Hobie 16 or Wave, is the sheave found at the top of the comptip assembly. Two sheaves are used in each assembly. The sheaves each ride on a, comptip sheave spacer.
The sheave is 9/16" wide x 2 1/4" diameter with 3/8" hole.
The larger sheave for the obsolete mast head for all-aluminum mast is no longer available.
Hobie Part number 20614210

H-16/WAVE COMP-TIP MAST HEAD SHEAVE

Bolt Socket Head 3/8-16 X 2.50"

Murrays part# 50-8040521

Hobie® factory replacement 3/8-16 x 2.50" socket head bolt is used on Getaway wing and Hobie® 18 rear inboard support.

Hobie Part# 8040521

BOLT 3/8-16 X 2.50"

Previous 1 2 3 4 5 6 … 16 Next

Recently viewed

Hobie