Hobie

Hobie

610 products

All Hobie OEM parts. Sails to rudders, trampolines to batten caps.

610 products

Sort

Hobie Tendon Kit (Pre EZ Loc)

Murrays Part# 50-37561011

This tendon kit is the replacement for tendons used on the Hobie Wave, Hobie Getaway, and Hobie Bravo with the first generation EZ Loc rudders. This upgraded version is a notable improvement over the original tendons.

Hobie Part# 37561011

HOBIE TILLER TENDON KIT (PRE EZ LOC)

H18 Diamond Wire Complete

Murrays Part# 50-61750001

Replacement Hobie 18 diamond wire assembly, including the turnbuckle, diamond wire roller and end fittings.

H-18 DIAMOND WIRE COMPLETE

HOBIE EPO3 RUDDER BLADE

Hobie 18 main sheet traveler car assembly - Hobie part number 61800001 - Murrays.com

Traveler Car Assembly H18 Complete - 61800001 - Murrays.com

H-18 TRAVELER CAR ASSEMBLY

Murrays Part# 50-10432000
Hobie® factory 2½" spring for Hobie® 16 lower rudder casting. This spring is longer and stiffer than original equipment (#50-10430000), providing additional tension if you are having trouble with rudder kick up.
Used on Hobie 18 Rudder Systems from late 80s through now.
Used on Hobie 16 Rudder Systems after 1983
Used on Hobie Getaway Rudder Systems pre- EZ Loc
Hobie part number 10432000

HOBIE RUDDER SPRING-LONG

Roller Furler Drum Ball Bearing
Murrays Part# 50-61670000
Hobie® factory replacement bearing for Hobie roller furler. A total of 18 ball bearings are required per furler.

HOBIE ROLLER FURLER BEARING

Hobie Gooseneck Hinge Vertex

Murrays Part# 50-50772031
Hobie® factory replacement gooseneck vertex for all Hobie® Cats.

Hobie Part# 50772031

HOBIE GOOSENECK HINGE VERTEX

EZ LOC UP-LOCK PIN KIT

Murrays PN 50-50314001

The EZ LOC UP-LOCK PIN KIT is the pin for locking Hobie Cat EZ Loc rudder system in up position during storage. EZ Loc up-lock pin kit is the pin, screw, split rings and lanyard for securing the EZ Loc rudder in the up position.

Hobie Part Number 50314001

HOBIE EZ LOC UP LOCK PIN KIT

Washer 3/8 X 3/4 Nylon for 07-1953
Murrays Part# 50-8080691
Washer for tiller arm bolt #50-8040171. Hobie® factory item

WASHER NYLON 3/8 X 3/4"

Hobie Main Sail Headboard w/ rivets
Replacement Hobie factory Hobie Main Sail Headboard w/ rivets. Hobie part #68330011

HOBIE ALUMINUM HEADBOARD WITH RIVETS

Hobie Wave Lower Pintle Bushing

Murrays Part# 50-38360001

This is the lower bushing for the original Wave or Getaway rudder castings. This fits into the aluminum rudder castings PRE- EZLoc rudder assemblies. This also fits Getaway and Bravo Pre-Ez Loc assemblies.

Hobie Part# 38360001

HOBIE WAVE LOWER PINTLE BUSHING

Hobie Bravo Batten Cap
Murrays Part# 50-9101100
Hobie batten cap for round battens
Sold individually

BRAVO BATTEN CAP

Hobie Pre EZ Loc Upper Pintle

Murrays Part# 50-38101301

Replacement upper pintle assembly for Hobie Wave and Hobie Getaway sailboats using the pre EZ loc style rudder assembly.

Original Equipment on Hobie Wave and Hobie Getaway sailboats
Upper pintle should be mounted with two (2) screws
Use Part# 8030171 for boats 2008 and older, or Part# 8030331 for 2009 and newer

If you have an EZ Loc style assembly, use the Hobie EZ loc upper pintle part# 90880211

Hobie Cat Part # 38101301

HOBIE WAVE/GETAWAY UPPER PINTLE - PRE EZ LOC

GETAWAY WING PIN/EZ LOC RUDDER LANYARD

Replacement lanyard for Hobie Getaway Wing Pins and EZ Loc rudder up pin kit.

Hobie part number 50314001

HOBIE GETAWAY WING LEG LANYARD

Hobie Tiller End Cap (Tendon Style)

Murrays Part# 50-37561001

Hobie® factory replacement tendon-style tiller end cap

Hobie Part# 37561001

HOBIE TILLER END CAP (TENDON STYLE)

HOBIE ROLLER FURLING DRUM 1" NYLINER

H18 Mast Bearing

Murrays Part# 50-60110000

Hobie Cat® factory mast bearing for Hobie 18. This part sits on the mast step to facilitate mast rotation on the Hobie 18.

Hobie part# 60110000

H-18 MAST BEARING

H14/16 Gooseneck Shackle

Murrays Part# 50-10772020

Hobie factory replacement gooseneck shackle for Hobie 14 and Hobie 16.

Uses a 3/16 x 7/8" clevis pin to connect to the main sail tack.

Quick release upgrade option is the 3/16 x 3/4" Quick Release Pin, part #18-3M075L

Some newer boats and racers replace the downhaul ring with a second Gooseneck Shackle.

H-14/16 GOOSENECK SHACKLE

Tracker: Sheave

The standard replacement sheave for the tracker traveler on all Hobie® 14, 16 and newer 17's. Hobie® factory item #11880000.

Tracker is the term used by Hobie for the rear traveler car. This can also be considered a traveler sheave.

Fits Hobie Getaway Main Traveler Car.

TRACKER TRAVELER SHEAVE

H18 Wing Strut Tab

Murrays Part# 50-65100000

Hobie® factory replacement wing strut tab for Hobie 18.

H-18 WING STRUT TAB

H-16 FOAM MAST PLUG

Hobie Tiller End Cap

Murrays Part# 50-10400010

Tiller arm end cap for Hobie Cats is a factory replacement part. Use two 6-6 rivets (item #19-5032) for installation.

HOBIE TILLER END CAP

H14/16/18/20/Wave Rudder Cam Stop Plate

Murrays Part# 50-20352000

Hobie factory replacement rudder cam plate for Hobie 14, 16, 17, 18 (1987 and later) and Wave (with aluminum castings).

Hobie Part# 20352000

H-14/16/18/20/WAVE RUDDER CAM STOP PLATE

HOBIE TILLER EXT BUSHING

Murrays Part# 50-40300001

This is the bushing that goes into the tiller crossbar of most Hobiecat Sailboats. This part was discontinued or otherwise no longer available as a separate part.

Compare to Hobie part# 40600001

HOBIE TILLER BUSHING EXTENDER

NUT LOW PROFILE 5/16-24" NYLOCK

Hobie Shockcord Hook

Murrays Part# 007-81272

Easy to install shockcord snap hook. No tools required. Reusable! 1/4" hook.

Details:

Easy to install shockcord snap hook
No tools required
Reusable!
1/4" hook

Hobie Part# 2101

Hobie Shockcord Hook

Murrays Part# 007-81272

Easy to install shockcord snap hook. No tools required. Reusable! 1/4" hook.

Details:

Easy to install shockcord snap hook
No tools required
Reusable!
1/4" hook

Hobie Part# 2101

HOBIE SHOCK CORD HOOK

H16 Jib Sail (White)

Murrays Part# 50-20992010

This is an OEM Hobie White Jib for the Hobie 16 sailboat. This is class legal for One Design Hobie Racing. This sail includes batten ties

H-16 JIB SAIL (WHITE)

H16/17/18 Tiller Crossbar-Post-1995

Murrays Part# 50-20521001

The Tiller Crossbar H16, H17, H18 Post-1995- is a Hobie® factory replacement tiller crossbar for 1995 and newer Hobie® 16, 17 or 18.

The Post 95 version comes with the new style quick connect tiller connection system.

H-16/17/18 TILLER CROSSBAR-POST 1995

Hobie Drain Plug Screw

Murrays Part# 50-8031731

This screw is used to hold the rudder housing in the back of many of the Hobie Beach cats. H14, H16, H17, H18

Hobie Part# 8031731

HOBIE DRAIN PLUG SCREW

Getaway Forward Trampoline Lacing Rod- 68"

Murrays Part# 50-37880001

Trampoline lacing rod for the front of the Hobie Getaway trampoline.

Hobie Part# 37880001

GETAWAY FORWARD TRAMPOLINE LACING ROD 68"

Hobie® factory replacement end cap for Hobie 20-style tiller connector and adjuster kit (#07-1953). Hobie part number 40561001 and 40561000

Hobie 1953 tiller connection kit - new style

H-20-1995 & LATER TILLER CONNECTOR END CAP

Roller Furler Spool Housing

Murrays Part# 50-61960001

Hobie® factory replacement spool and housing for roller furler.

ROLLER FURLER SPOOL & HOUSING

Hobie Wave Hull Seal Cap

Murrays Part# 50-38370001

Hobie® factory replacement hull seal for under the seat pad on Wave.

Hobie Part# 38370001

WAVE HULL SEAL CAP

HOBIE POCKET PROTECTOR KIT

Screw Boom Clamp 10-24 X 1.25 FHMS-S

Murrays Part# 50-8031011

Hobie® factory replacement screw for the boom clamp (#50-61711000) on the Hobie 18. #10-24 x 1-1/4" flat head machine stainless screw with Phillips head.

Hobie Part# 8031011

SCREW 10-24x 1-1/4"

Swivel Cam Cleat Pad

Murrays Part# 50-11900010

Replacement base pad for your H16 jib car cleats or Mainsheet on most Hobie Cat sailboats.

Hobie Part# 11900010

SWIVEL CAM CLEAT PAD

Hobie European Rudder Cam

Murrays Part# 51-14061180

Hobie Europe factory replacement rudder cam. Similar but not exactly the same as the US version.

Rudder cams should be inspected and replaced periodically. Always replace cams that are bent out of shape.

Hobie part# 14061180

HOBIE EUROPEAN RUDDER CAM

H18 Lower Rudder Casting-Used

Murrays Part#

Used Hobie® factory replacement old-style lower rudder casting for pre-1986 Hobie 18 has aluminum lock-down cams.

This casting is no longer available as a new item, so the regular price shown is the price for a new-style Lower Rudder Casting. The Rudder Casting Conversion Kit (see related items) is necessary to upgrade the entire rudder kick-up system.

H-18 LOWER RUDDER CASTING-USED

Mast Float Attachment Kit: H14/16

Murrays Part# 007-30116

This attachment kit for Hobie® 14 or 16 comes with Hobie® Mama and Baby Bobs, but is also offered separately here.

H-14/16 MAST FLOAT ATTACHMENT KIT

Hobie 16 Grey Mesh Trampoline OEM - Hobie Part #20970058

H-16 MESH TRAMPOLINE-GREY

Previous 1 2 3 4 5 … 16 Next

Recently viewed

Hobie