Hobie 18 Parts

Hobie 18 Parts

362 products

    Parts for your Hobie 18

    362 products
    Halyard 5"X 9" Zip Pouch-Assorted Colors Murrays Part# 31-1400 The Murrays 5" x 9" zippered halyard pouch is constructed of rugged, water-resistant material with plastic hooks at each end to attach to the tramp lacing. The off-center zipper is designed for easy stuffing of your boat's halyard. The pouch is also handy for storing replacement parts, keys, and safety gear. Assorted colors. We have this pouch made for us right here in the U.S.A. Compare to Hobie Cat® stow bag #72000B and 7
    HALYARD 5"X9" ZIP POUCH- ASSORTED COLORS
    Murrays Sports
    Out of Stock
    The 6″ Cat Bag provides a handy storage pouch inside your access ports for snacks, drinks, tools and more. Designed to fit 6″ access ports that have a inner ring for them to sit on
    6" CAT BAG (SCREW-IN)
    Sea Dog
    Ronstan Figure 8 Trapeze Ring Murrays Part# 25-3610 Original equipment for Hobie® trapeze systems, the figure 8 ring is 6" long with 1-1/2" rings.
    RONSTAN FIGURE 8 TRAPEZE RING (EACH)
    Ronstan
    Ronstan Toggle Pin 15.9mm Long 6.4mm Diameter Murrays Part# 21-1155 Replaces 1/4" diameter clevis pin of same grip length. Also available with a lanyard 21-1155L
    RONSTAN TOGGLE PIN 1/4 x 5/8"
    Ronstan
    SAIL "HC" LOGO U-CUT PR BLACK
    Murrays Sports
    Quick Release Standard Pin 1/4 X 1" Murrays Part# 18-4R100 This quick-release pin with standard head and pull ring is sometimes used as a convenience item on Prindle main clew to outhaul connection. Measurements are 1/4" diameter x 1" maximum grip length (distance from the shoulder to the locking ball bearings)
    QUICK RELEASE STANDARD PIN 1/4 X 1
    Misc
    H18 Traveler Bushing Shaft Murrays Part# 50-61830000 This is a component of an H18 Traveler car. This will fit original Hobie 18 main traveler cars or the new cars that we are producing.  Hobie Part# 61830000
    Hobie 18 main traveler car parts list - 6180001, 8040301, 61870000, 61880000, 60190000, 8050311, 61842000, 8060121, 61810000, 61830000, 61852000, 8020431
    H-18 TRAVELER BUSHING SHAFT
    Murrays Sports
    Out of Stock
    QUICK RELEASE STANDARD PIN 1/4 X 3/4"
    Misc
    Clamcleat with Top Roller (Aluminum) Murrays Part# 27-0236 Replace old, worn-out outhaul and downhaul Clamcleats®. Aluminum cleats are stronger than nylon and have increased wear resistance. Easy to mount. Line capacity is 1/8"-1/4".
    CLAMCLEAT WITH TOP ROLLER (ALUMINUM)
    Clamcleat
    Rudder Pins H17/18 (Nylon) Murrays Part# 001-4271 Nylatron rudder pins are sacrificial for use in the surf (they'll break before your rudder system does) and should be inspected often for wear. These universal 3/8" x 9-1/4" nylon rudder pins are suited for all Hobie® 17/18/Wave rudder castings. Compare to Hobie Cat® #5052 fiberglass rudder pins (pair).
    RUDDER PINS H-17/18 PR (NYLON)
    Murrays Sports
    10 Hole Hobie shroud adjuster
    10 HOLE SHROUD ADJUSTER
    Misc
    Ronstan 5/16 bow with hole shackle RF638 - Hobie 20700001 and SP150081
    RONSTAN 5/16" BOW SHACKLE WITH HOLE
    Ronstan
    Murrays Part# 001-4045 Hobie 18 Mast Bearing Kit enables smooth mast rotation on the Hobie® 18. The kit includes a new mast bearing, stainless steel washers and Teflon washer. To mount, use one #19-3019 screw (included) for post-1990 Hobie 18 or one #19-3020 screw (sold separately) for pre-1990 Hobie 18. Compare to Hobie Cat® #1132 (bearing 60110000 and Teflon™ washer).
    Hobie 18 mast bearing 60110000 and 1132
    HOBIE 18 MAST BEARING KIT
    Murrays Sports
    Hobie Sail Feeder Kit Murrays Part# 50-80100501 Replacement sail feeder for use on many Hobie Cat mast assemblies to make raising your mainsail easier than ever! Hobie®'s Sail Feeder helps the sail feed evenly into the mast track without catching and/or tearing the sail.
    HOBIE SAIL FEEDER KIT
    Hobie
    H18 Thru-Deck Fairlead Murrays Part# 50-60270000 Fairlead Thru-Deck H18 for trapeze shock cord for skipper and crew trapeze lines that go through the lip on the outside of the hull. Center hole on this fairlead is 7/8" diameter and is sleeved with a stainless steel ferrule. Mounting screw holes have a center-to-center measurement of 1-3/8". Hobie® factory replacement part. Hobie Part# 60270000
    H-18 THRU-DECK FAIRLEAD
    Hobie
    H18 Telo-Cat/Hobie Vane Adapter Murrays Part# 008-1451 Adapts the Telo-Cat (#08-1450) or Hobie® (#04-7703) vane to the Hobie 18 furling drum. When using to adapt a Telo-Cat vane for use on a Hobie 18, it is necessary to enlarge one hole in the plastic part of the vane to accommodate a clevis pin. Hobie Cat® Part# CM7705
    H-18 TELO-CAT VANE ADAPTER
    Murrays Sports
    H18 Main Adjustable Batten Leech Caps Murrays Part# 012-4003 No more knots at the trailing edge. Adjust Hobie® 18 main sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life. Hobie Part# 1523 Sold in packages of 10
    H-18 MAIN ADJUSTABLE BATTEN LEECH CAPS (10)
    Tren-Tec
    Hobie 18/21Sport Edition Boom Cleat Clamp Murrays Part# 50-61711000M  The Hobie boom clamp mounts the clamcleat (#27-0702) on to a Hobie 18 boom. Two boom clamps are required to mount one cleat. This is a Murrays product, made with an Anodized aluminum body and a 316 stainless steal screw insert.  Made in California, USA. Compare to Hobie part# 61711000 discontinued by Hobie
    H-18/21SE BOOM CLEAT CLAMP
    Murrays Sports
    Wing Mount Bar 2 x 1/2" Murrays Part# 19-0020 5/16-18" Hole
    WING MOUNT BAR 2.5 x 1/2"
    Murrays Sports
    Ronstan Stainless Steel Bow Shackle, 5/16" Pin, Coined Head with Hole Murrays Part# 21-0636 The Ronstan 5/16 Bow Shackle has 5/16" diameter pin. Compare to Hobie® #20700001 and SP150081. Standard all Hobie, Nacra and Prindle catamarans to attach the standing rigging to the mast tang.
    Ronstan bow shackle measurements
    RONSTAN 5/16" BOW SHACKLE
    Ronstan
    ELONGATED TRAPEZE RING Large trapeze ring made of solid 316 stainless steel for strength and longevity. AKA: dog bone, harness ring, harness loop, trap ring, trapeze ring.  Hobie part number 2002, compare to Hobie part number 2001 Length: 7-1/2"
    ELONGATED TRAPEZE RING
    Misc
    Hobie Gooseneck Hinge Vertex Murrays Part# 50-50772031 Hobie® factory replacement gooseneck vertex for all Hobie® Cats. Hobie Part# 50772031
    HOBIE GOOSENECK HINGE VERTEX
    Hobie
    Out of Stock
    Swivel Mount Base with Fasteners Murrays Part# 007-1162 The offset base pad kit fits Hobie® and Prindle elliptical crossbars. Includes injection-molded plastic base and fasteners. Replacement fasteners are also available (requires 3 self-tapping screws #19-1620, 1 machine screw #19-1516, and 1 nut #19-2016). Hobie Cat® Part# 1162
    PRINDLE SWIVEL MOUNT BASE WITH FASTENERS
    Hobie
    SMALL BLOCK W/REMOVABLE SHEAVE This small block is used on trapeze adjustment systems where the removable sheave enables installation without cutting wires. Specifications: 1-3/16" removable sheave, Teflon® bearing and 5/16" line capacity. Hobie item #3103
    SMALL BLOCK W/REMOVABLE SHEAVE This small block is used on trapeze adjustment systems where the removable sheave enables installation without cutting wires. Specifications: 1-3/16" removable sheave, Teflon® bearing and 5/16" line capacity. Hobie item #3103
    SMALL BLOCK WITH REMOVABLE SHEAVE
    Murrays Sports
    Heavy Duty Swivel with Aluminum Cam Roller Fairlead Murrays Part# 25-3020 Swivel cam cleats are ideal for main traveler control and up-release jib cleating systems. This is a Murrays product that features an Aluminum Harken 150 cam cleat, and HD swivel plate and a HD roller fairlead. The advantage to the roller fairlead is that it can take a larger line diameter, up to 1/2", and handle heavy loads at extreme angles. Making it ideal for larger catamarans and sailors in high wind areas.
    ROLLER FAIRLEAD KIT (SWIVEL)
    Murrays Sports
    Hobie Rudder Cam Hobie part number 10480000 Hobie factory replacement cam. Rudder cams should be inspected and replaced periodically. Always replace cams that are bent out of shape. Used on all Hobie Catamarans with metal housing rudder systems. Compatible on all Hobie 14, 16, 17, 18, 20, 21SC and 21SE as well as older Wave and Getaway models. Not compatible with the Hobie Wave and Getaway EZ Loc plastic rudder housing rudder system.
    HOBIE RUDDER CAM
    Hobie
    Jib Clew Plate 3-Hole Murrays Part# 50-62270000 Hobie® factory replacement 3-hole jib clew plate (pair) with rivets. Hobie 18 main sail clew plate Hobie Part# 62270000
    JIB CLEW PLATE 3-HOLE
    Hobie
    H18 Wing Strut Tab Murrays Part# 50-65100000 Hobie® factory replacement wing strut tab for Hobie 18.
    H-18 WING STRUT TAB
    Hobie
    Shroud Stay Adjuster 7 Hole Murrays Part# 25-3310 Stainless steel shroud adjuster with seven 1/4" holes. ​Use #22-9802 clevis pin at top and #22-9808 at bottom. Fits: H14/16/18/20, Wave and Getaway. Compare to Hobie Part# 20830010
    SHROUD STAY ADJUSTER 7-HOLE
    Murrays Sports
    Sale
    Jib track 5/8” used
    Murrays Sports
    Save $15
    HOBIE 18 CHANNEL RETAINING PLATE HOBIE PART NUMBER 61110000
    H-18 CHANNEL RETAINING PLATE
    Murrays Sports
    H18/21 Jib Protector Balls Murrays Part# 012-0020 Diamond wire spreader balls for the Hobie 18 and 21.  They go on your diamond wire spreaders to protect your jib from rubbing against them.
    H-18/21 JIB PROTECTOR BALLS
    Tren-Tec
    Soft Grip Standard Extension .570 x 11" Murrays Part# 007-3206 This is a grip upgrade for the standard Hobie Tiller extension, it will also fit the Murrays fixed tiller extension as well. Hobie Part# 3206
    SOFT GRIP STANDARD EXTENSION .570 x 11"
    Hobie
    Hobie Tiller Extension Hinge Murrays Part# 50-10532010 Hobie® factory replacement tiller extension hinge for #50-20550001 Hobie® Fiberglass tiller extension. Also used on Nacra tillers. Hobie Part Number: 10532010
    HOBIE TILLER EXTENSION HINGE
    Hobie
    Traveler Spacer H18 Murrays Part# 50-61880000 Hobie® factory replacement spacer for Hobie® 18 main traveler car.
    H-18 TRAVELER SPACER
    Hobie
    H18 Rudder Cam Pin Murrays Part# 50-50312301 Hobie® factory replacement rudder cam pin for Hobie 17, 18, 20, 21SC and 21SE as well as older Wave and Getaway models.
    H-18 RUDDER CAM PIN
    Hobie
    Roller Furling Drum Forestay Adjuster Murrays Part# 50-60830000 Hobie® factory replacement 13-hole adjuster for roller furler. Hobie Part# 60830000
    ROLLER FURLING DRUM FORESTAY ADJUSTER
    Hobie
    H18 Mast Bearing Murrays Part# 50-60110000 Hobie Cat® factory mast bearing for Hobie 18. This part sits on the mast step to facilitate mast rotation on the Hobie 18. Hobie part# 60110000
    H-18 MAST BEARING
    Hobie
    Out of Stock
    Twist Toggle: Hobie/Prindle Murrays Part# 25-3320 Stainless steel twist toggle is the standard equipment connection between the shroud anchor pin and shroud adjuster on many catamarans. The twist toggle acts as a universal joint to help eliminate binding. Hobie Cat® item #20210000.
    HOBIE/PRINDLE TWIST TOGGLE
    Hobie
    Murrays Part# 001-0062 Replacement tiller yoke assembly for all hiking sticks sold by Murrays. Used to connect the tiller extension to the tiller crossbar. Includes two contoured spacers that provide a solid platform for the yoke to sit on. Compare to Hobie Cat® Tiller yoke assembly #3205 or NACRA connection part tiller/joystick #31072 Applications: All Hobies and Prindles Tiller Yoke Assembly: 1
    TILLER YOKE ASSEMBLY WITH SPACERS
    Murrays Sports
    Recently viewed