Hobie 18 Parts

Hobie 18 Parts

362 products

    Parts for your Hobie 18

    362 products
    Out of Stock
    H18 Spreader Arm Murrays Part# 50-61420000 Hobie® factory replacement spreader arm for Hobie® 18.
    H-18 SPREADER ARM
    Hobie
    Shock Cord Tramp Lacing Kit H14/16/18 Murrays Part# 001-2241 Shock Cord Tramp Lacing Kit H14, 16, 18 is for the recreational sailor who is lacing a trampoline. Shock Cord is usually the better choice over line tramp lacing. Just "set it and forget it" because shock cord maintains the tension you set when lacing your tramp. Shock cord also reduces tramp and grommet wear because the load is spread over multiple grommets, especially when walking on the tramp. The latest technology shock cord used in our kits
    H-14/16/18 SHOCK CORD TRAMP LACING KIT
    Murrays Sports
    JIB CLEW BLOCK KIT
    Murrays Sports
    Out of Stock
    Back Up Casting H18 Bow Tang Murrays Part# 50-61120001 Hobie® factory replacement back up casting for Hobie® 18 bow tang.
    H-18 BACK UP CASTING BOW TANG
    Hobie
    H-18SX/21 WING END CASTING
    Hobie
    Out of Stock
    H18 Straight Tiller Arm-Black Murrays Part# 50-60380111 Hobie® factory replacement black straight tiller tube for 1987 and later Hobie® 18. For Hobie 18's made in 1986 and before, a conversion kit (#50-60331010) is required.
    H-18 STRAIGHT TILLER ARM-BLACK
    Hobie
    Out of Stock
    H18 Shroud Anchor Plate Kit Murrays Part# 50-64100001 The Shroud Anchor Plate Kit H18 is the Hobie® factory replacement shroud anchor plate kit for Hobie 18. Applications: This kit is also used to re-enforce the crossbar bolts on Hobie 18s with wings or the lighter H18 boats that were built from 1984-1988.
    H-18 SHROUD ANCHOR PLATE KIT
    Hobie
    Out of Stock
    Compression Plate Assembly Kit H18 Murrays Part# 50-60680001 Hobie® factory mast compression plate assembly kit for Hobie 18 and 18SX
    H-18 COMPRESSION PLATE ASSEMBLY KIT
    Hobie
    Out of Stock
    6" ARMSTRONG DECK PLATE
    Armstrong
    H-18/21 Sport Cruiser Jib Halyard with Shackle Murrays Part# 002-0486-00 Jib halyard with shackle for H18/21 Sport Cruiser is constructed to factory specifications. Please note that the H21SC is differentiated by its 8.5' beam, front trampoline and Hobie® 18 rigging. Order Jib Halyard line separately: 20' of 1/8" line Murrays Part# 39-0221
    H-18/21SC JIB HALYARD WITH SHACKLE
    Murrays Sports
    Out of Stock
    Quick Release Pin 1/4 X 1-1/4 with Lanyard Murrays Part# 18-4M125L
    QUICK RELEASE PIN 1/4 X 1-1/4" WITH LANYARD
    Misc
    Out of Stock
    Deluxe Quick Release Pin 1/4 X 1 with Lanyard Murrays Part# 18-4M100 This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. Uses: Hobie boom Gooseneck quick connection pin on the 14, 16 and 18. Hobie 18 main clew to outhaul car connection pin. Compare to Hobie Cat #20305 PIN, QR 1/4 X 1 CUP Upgrade for Hobie 8020410 and 8020411 clevis pin
    DELUXE QUICK RELEASE PIN 1/4 X 1" WITH LANYARD
    Misc
    Out of Stock
    Hobie Halyard Twist Shackle Murrays Part# 50-60670000 Classic 3/16 inch stainless steel twist shackle from Hobie Cat. Hobie Part# 60670000
    HOBIE HALYARD TWIST SHACKLE
    Hobie
    H18 Traveler Cylinder Bearing Set Murrays Part# 50-61852000 Hobie® factory replacement cylinder bearing set for Hobie® 18 main traveler. Set includes one pair.
    Hobie 18 main traveler car parts list - 6180001, 8040301, 61870000, 61880000, 60190000, 8050311, 61842000, 8060121, 61810000, 61830000, 61852000, 8020431
    H-18 TRAVELER CYLINDER BEARING SET
    Hobie
    H14/16/18/20/Wave Rudder Cam Stop Plate Murrays Part# 50-20352000 Hobie factory replacement rudder cam plate for Hobie 14, 16, 17, 18 (1987 and later) and Wave (with aluminum castings). Hobie Part# 20352000
    H-14/16/18/20/WAVE RUDDER CAM STOP PLATE
    Hobie
    Sale
    H18 Seaway Jib Blocks - Used
    Misc
    Save $105
    Out of Stock
    Quick Release Deluxe Pin 1/4 X 1.25" Murrays Part# 18-4M125 This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. Also available with a lanyard, see related items below. Uses: This pin is recommended for connection of hiking stick to crossbar on all Hobie, Nacra and Prindle catamarans. Also used on Hobie 18 SX and Hobie Magnum wings. Compare to Hobie part# 20306 PIN, QR 1/4 X 1-1/4 CUP
    QUICK RELEASE DELUXE PIN 1/4 X 1-1/4"
    Misc
    Out of Stock
    Specs: 1/4" diameter x 1" maximum grip length (distance from the shoulder to the locking ball bearings). Uses: Hobie boom Gooseneck quick connection pin on the 14, 16 and 18. Hobie 18 main clew to outhaul car connection pin. Compare to Hobie Cat® Part# 20305 PIN, QR 1/4 X 1 CUP Upgrade for Hobie Part# 8020410 and 8020411 clevis pin
    QUICK RELEASE DELUXE PIN 1/4 X 1"
    Misc
    Headboard Replacement Kit Murrays Part# 001-1014 Headboard Replacement Kit includes one pair of anodized aluminum plates with rivets to be set with a hammer. Plates measure 5" high x 4" wide x 6-1/4 diagonal. Replacement rivets are available separately (#19-5006).
    HEADBOARD REPLACEMENT KIT
    Murrays Sports
    Tiller Crossbar Adjustable Cap Kit Murrays Part# 50-60400011M Murrays Tiller Crossbar Adjustable Cap Kit installs in the end of the Hobie tiller crossbar and allows you to adjust the width of the crossbar which controls the angel of the rudders. Hobie discontinued this part and this is a Murrays Replacement part that we have made here in California. Applications: H14, H16, H17, H18, Hobie 18 SX tiller x-bar Tiller Crossbar Adjuster: 1
    HOBIE TILLER CROSSBAR ADJUSTABLE END CAP
    Murrays Sports
    H14/16/18 Dyneema Race Tramp Lace Kit Murray Part# 001-2242-1 Tramp Lace Kit H14 H16 H18 - Dyneema Race Kit uses Dyneema® which is the best choice for racers or other sailors looking for the ultimate in strength, light weight, and very low stretch characteristics in their tramp line lacing. Dyneema® has excellent ultraviolet and abrasion-resistance properties for longevity.
    H-14/16/18 DYNEEMA RACE TRAMP LACE KIT
    Murrays Sports
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone, trap handle
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone
    CAN'T MISS RINGS
    Murrays Sports
    Hobie Aussie Halyard Ring Murrays Part# 007-3064 If you're having trouble raising or lowering your mainsail due to a faulty halyard ring and shackle, this upgrade will help. Welded ring and lanyard give you more positive control while hooking or unhooking the ring to the hook. Use on any boat that uses a hook at the mast head and a ring and shackle at the head of the sail. Personal preference dictates whether you choose this ring or the Murrays Aussie Ring (#01-4216). Hobie® Part# 3064
    HOBIE AUSSIE HALYARD RING
    Hobie
    Mast Rotation Control Arm Murrays Part# 25-3040 Stainless mast rotation control arm is strong and smooth! Arm #25-3040 with 1/4″ hole is for all Hobies except for the Hobie® 17, Prindles and Nacras; Arm #25-3041 with 5/16″ hole is for Nacras, Prindles and the Hobie® 17. H17 uses #19-2235 bolt Hobie Part# 61210001
    MAST ROTATION CONTROL ARM
    Murrays Sports
    TURNBUCKLE COMPLETE 5/32"
    Misc
    Harken Sail Chafe Protector Murrays Part# 28-0285 Harken's Sail Chafe Protector Set replaces the diamond wire rollers to protect the jib from chafing on the diamond wire spreader. The split rollers are pre-drilled to fit up to 3/16" wire. Each 2-3/4"-diameter (70mm) protector has two pieces that snap together for easy installation. Used on Hobie 18, Hobie 20, Prindle 18.2, Prindle 19, Nacra 15, 17, 18, Inter 20, F18
    HARKEN SAIL CHAFE PROTECTOR (2)
    Harken
    Out of Stock
    H14/18 Jib Luff Zipper Murrays Part# 50-62300000 Hobie® factory jib luff zipper for Hobie 14 or 18. Hobie Part# 62300000
    H-14/18 JIB LUFF ZIPPER
    Hobie
    H18 Traveler Angle Deck Plate Murrays Part# 50-61870000 Deck plate for Hobie 18 traveler from Hobie Cat. Hobie Part# 61870000
    Hobie 18 main traveler car parts list - 6180001, 8040301, 61870000, 61880000, 60190000, 8050311, 61842000, 8060121, 61810000, 61830000, 61852000, 8020431
    H-18 TRAVELER ANGLE DECK PLATE
    Hobie
    SPRING TENSIONED SNAP SHACKLE
    Murrays Sports
    Main Halyard Ring (Murrays) Murrays Part# 001-4216 If you're having trouble raising or lowering your mainsail due to a faulty halyard ring and shackle, this upgrade will help. Welded ring and lanyard give you more positive control while hooking or unhooking the ring to the hook. Use on any boat that uses a hook at the mast head and a ring and shackle at the head of the sail. Personal preference dictates whether you choose this ring or the Hobie Aussie Ring (#07-3064). This item replaces discontinued Part
    MAIN HALYARD RING (MURRAYS)
    Murrays Sports
    Hobie Shroud Anchor Pin Hobie 16, 17 and 18. 20100000 20100010
    HOBIE SHROUD ANCHOR PIN 20100000
    Murrays Sports
    Jib Clew Pigtail Kit Murrays Part# 001-4015 Easy-connect Dyneema® jib clew pigtail. Speed up tacks and improve sail shape by moving jib clew blocks away from the jib clew. Color may vary from picture. Features: jib Clew Pigtails move jib clew blocks about 14" from jib clew— saves 4 feet of sheeting/unsheeting per tack! "Locked" eye splices— jib blocks cannot slip or un-tie. Save weight (only 2.4oz) and move weight away from jib clew— better sail shape in light wind. Lightweight, easy-connect—
    jib clew pigtail attachment close up
    JIB CLEW PIGTAIL KIT
    Murrays Sports
    Snap Shackle With Tack 1/4" Murrays Part# 22-4501 Swiveling tack shackle with 1/4" clevis pin. Use on hexaratchets on Hobie® 18, Nacra or Prindle. To connect the swivel shackle to an item that requires a 3/16" clevis pin, you will need a 3/16" clevis pin with 7/8" shaft. Also convenient for the jib tack connection on Nacras and Inters.
    SNAP SHACKLE WITH TACK 1/4"
    Murrays Sports
    trapeze adjustment kit - 3102 - Murrays EZ Up Trap Kit
    EZ-UP TRAP KIT: NO-CUT (PR)
    Murrays Sports
    The Hobie 18 Trapeze Shock Cord is an absolute necessity because it keeps the trapeze system in place and ready for hook-up. On this kit for Hobie® 18, one hook connects to either the thimble on the trapeze wire or the adjustment line, then runs through the hull fairlead and through the eyestrap under the lip of the hull near the bow or stern for crew and skipper trapeze lines respectively. The 3/16" shock cord stretches more and slides through ferrules better than larger diameter shock cord. Includes four
    H-18 TRAP SHOCK CORD (4)
    Murrays Sports
    Rudder Locking Kit Hobie 17, 18, 20, 21 Murrays Part# 001-3552 The Rudder Locking Kit Hobie 17, 18, 20, 21 includes the rudder spring, rudder casting screw, and the rudder plunger for the Hobie 17, 18, 20 and 21. Delrin screw is 3/4-10 thread. In many cases you can drill it out with a 5/8" drill bit and then get a 3/4-10 tap to clear the threads.
    H-17/18/20 and 21 RUDDER LOCKING KIT
    Murrays Sports
    Quick-Release Pin Deluxe 1/4 X 3/4 with Lanyard Murrays Part# 18-4M075L This aircraft quality quick-release pin features a deluxe dished head. No other locking pin is faster operating or safer. Stainless 1/16" x 7" lanyard stainless lanyard is secured on one end with a nicropress oval; the other end is left open so that you can secure with included nicropress oval after attaching the lanyard to your chosen location. Measurements are 1/4" diameter x 3/4" maximum grip length (distance from the shoulder to
    QUICK RELEASE PIN 1/4 X 3/4" WITH LANYARD
    Misc
    Out of Stock
    Spreader Arm Slide Murrays Part# 50-61440000 Hobie® factory replacement spreader arm slide. Discontinued by Hobie - feel free to email us to see about used options
    HOBIE SPREADER ARM SLIDE
    Hobie
    1/4" QUICK RELEASE BOW SHACKLE
    Murrays Sports
    Rudder Pins H17/18 Stainless Steel Murrays Part# 001-4273 Weight-saving compared to solid stainless steel pins, hollow stainless rudder pins with still beefy .065″ wall provide reduced wear and the good long-term durability. The universal stainless steel 3/8″ x 9-1/4″ rudder pins are suited for; Hobie 17/18/20 rudder castings. Also used on older Hobie Wave and Getaways with metal rudder castings. Cotter pins are included. Alternative to Hobie Cat® #60880011.  (* Pre EZ LOC Rudder c
    H-17/18 RUDDER PINS PR (SS)
    Murrays Sports
    Recently viewed