Hobie 18 Parts

Hobie 18 Parts

362 products

    Parts for your Hobie 18

    362 products
    Rudder Stiffening Kit Murrays Part# 001-2053 The Rudder Stiffening Kit for all Hobies eliminates excessive clearances between rudders and castings which cause wobble and thwart rudder alignment. Kit has 4 stainless nylock nuts and 8 spacers. Compare to Hobie Cat® item #136.
    RUDDER STIFFENING KIT
    Murrays Sports
    HOBIE ROLLER FURLING DRUM 1" NYLINER
    Hobie
    Drain Plug with Plastic Base Murrays Part# 001-0051 This lightweight and inexpensive drain plug features a molded recess in the molded nylon base that traps sealant (sold separately) in place, providing a more watertight seal. Gasket included.
    DRAIN PLUG WITH PLASTIC BASE
    Sea Dog
    Screw Delrin 3/8-16 X .75" Murrays Part# 50-8032001 Hobie® factory replacement 3/8-16 x 3/4" Delrin screw is used as rudder rake adjustment screw on Pre-EZ Lock Rudder System. Hobie Part# 8032001
    SCREW DELRIN 3/8-16 X .75"
    Hobie
    Roller Furling Darby Ring (Small) Murrays Part# 50-8062501 Hobie® factory replacement small Darby ring for roller furler. Hobie Part# 8062501
    ROLLER FURLING DARBY RING (SMALL)
    Hobie
    H18 Compression Sleeve Murrays Part# 50-61490000 Hobie® factory replacement compression sleeve for mast of Hobie 18.
    H-18 COMPRESSION SLEEVE
    Hobie
    Hobie 18 mast step hinge pin, has a hole on one end only. The headless clevis pin measures 1/4″ diameter by 3-3/8″ grip length Hobie Part # 8020501
    HEADLESS CLEVIS PIN 1/4 X 3-3/8"
    Misc
    Out of Stock
    NYLINER 3/8"
    Hobie
    Hobie rudder bushing. Hobie part number 8062001
    RUDDER TITE BUSHING EACH
    Murrays Sports
    H18 Nylon Roller Furler Sleeve Murrays Part# 50-61940000 Hobie® factory replacement nylon sleeve for roller furling assembly. Hobie Part# 61940000
    HOBIE NYLON ROLLER FURLER SLEEVE
    Hobie
    H18/20 Outhaul Car Bearing Pin Murrays Part# 50-60250000 This pin is used to hole the bearings on the traveler car for an H-18 or Miracle 20 beachcat. This pin has been discontinued by Hobie, this part meets or exceeds OEM quality and specification. Compare to Hobie Part# 6025000
    H-18/20 OUTHAUL CAR BEARING PIN
    Hobie
    Out of Stock
    H17/18 Mast Foam Plug Murrays Part# 50-60060000 Hobie® factory replacement foam plug for Hobie® 17 or 18 mast.
    H-17/18 MAST FOAM PLUG
    Hobie
    Boom Outhaul Bearing H18 Murrays Part# 50-60240000 Boom bearing for Hobie 18 outhaul system
    H-18 BOOM OUTHAUL BEARING
    Murrays Sports
    Made from 18 stainless steel these set screws are chemical resistant and may be mildly magnetic. They have a thin edge that digs into the contact surface for a secure hold. Length listed is the overall length. Screw for the Hobie 18 wing mount kit. 65071001
    SOCKET SCREW 5/16-18 x 2"
    Misc
    H18 Assembly Manual Murrays Part# 50-63450000 Printout of H18 assembly manual PDF.
    H-18 ASSEMBLY MANUAL
    Murrays Sports
    Rope Lock (Nylon) Murrays Part# 001-0120 Easy-to-adjust black rope lock commonly used for trapeze height adjustment. Standard rope stop on Hobie®, Nacra and Prindle. Double-up back-to-back for extra strength. Hobie part number 61530000 for this rope lock. Works on 3/16 to 1/4" line
    NYLON ROPE LOCK
    Murrays Sports
    Out of Stock
    H16 E-Clip Gooseneck Murrays Part# 50-8062521 Hobie® factory replacement E-clip for gooseneck on Hobie® 16. The E-clip fits old-style boom pin that is grooved. Hobie Part# 8062521
    H-16 E-CLIP GOOSENECK
    Hobie
    Bolt Socket Head 3/8-16 X 2.50" Murrays part# 50-8040521 Hobie® factory replacement 3/8-16 x 2.50" socket head bolt is used on Getaway wing and Hobie® 18 rear inboard support. Hobie Part# 8040521
    BOLT 3/8-16 X 2.50"
    Hobie
    Universal Drain Plug for most Hobie, Nacra and Prindle Catamarans which includes a gasket and fits most Hobie, Nacra and Prindle catamarans. Hobie part number 10091000
    Hobie drain plug 10091000 Hobie 18
    HOBIE DRAIN PLUG WITH GASKET
    Misc
    Toggle Strap 12"-24" Murrays Part# 13-1020 Our handy toggle strap secures items with circumferences from 12" to 24". It is constructed of 1/8" shock cord that is secured with a 1-1/8" end stop. Sold individually Compare to Hobie Cat® Part# 370
    TOGGLE STRAP 12" - 24"
    Murrays Sports
    Ronstan Stainless Thimble for 5mm (3/16") Wire Ronstan thimble is used on shrouds. Constructed of grade 316 stainless steel. Weight: .2 oz.
    RONSTAN STAINLESS THIMBLE FOR 5MM (3/16") WIRE
    Ronstan
    3/16 X 7/8" Clevis Pin Murrays Part# 22-9806 3/16 x 7/8 Clevis Pin.  H16 gooseneck shackle clevis pin. Hobie Part# 8020061
    CLEVIS PIN 3/16 X 7/8"
    Misc
    3/16 X 5/8"Clevis Pin Murrays Part# 22-9805 Stainless steel clevis pin. Measurement is 3/16" diameter x 5/8" grip length (shoulder to the split ring hole). Compare to Hobie Cat® Part# 8020041
    CLEVIS PIN 3/16 X 5/8"
    Misc
    Bolt Hex Head 1/4-20 X 5" (Stainless Steel) Murrays Part# 19-2226 Stainless steel 1/4-20 x 5" hex head bolt is used for Hobie® 18 mast rotation arm. Use #19-2516 nut. Equivalent to Hobie® Part# 8040111
    BOLT HEX HEAD 1/4-20 X 5" (SS)
    Misc
    Clevis Pin1/4 X 1" Murrays Part# 50-8020401 Hobie® factory replacement 1/4" x 1" clevis pin. Compare to Hobie Part Number 8020411 Applications: H18 / Hobie 18 SX Tiller Yoke Clevis Pin: 1
    CLEVIS PIN 1/4 X 1"
    Hobie
    Wind Vane Replacement Tips and Washers  Coffee Marine Wind Vane Tip and Washer kit that fits the original Coffee Marine Bridle Vane and the Hobie Standard Bridle Vane. These are easy to knock off or misplace. Stash a couple in your tool box and never be without your trusty Bridle Fly! 
    WIND VANE REPLACEMENT TIPS & WASHERS
    Murrays Sports
    Tiller Connection Kit Murrays Part# 001-2061 The Murrays Tiller Connection Kit assures consistent rudder alignment through the full rudder sweep. Spring-loaded half balls and contoured spacers take the slop out of the tiller-to-crossbar connection on Hobie Cats. Racing class legal. Each kit contains 2 connectors to join the tiller crossbar to the tiller arms. Compare to Hobie Cat® #3052. Applications:; Hobie 14, 16, 17, 18, 18SX
    PLASTIC CONTOURED SPACER
    Murrays Sports
    3/16 X 1/2" Clevis Pin Murrays Part# 22-9801 Stainless steel clevis pin measures 3/16" diameter x 1/2" grip length (shoulder to the split ring hole). Prindle / Nacra Part# 9412 Compare to Hobie Cat® Part# 8020041
    CLEVIS PIN 3/16 x 1/2"
    Misc
    Stainless steel clevis pin. Measurement is 1/4" diameter x 1-3/4" grip length (shoulder to the split ring hole). Uses: This pin replaces #56-7809, gooseneck clevis pin for Nacra 5.2 and all Prindles. Hobie 18 main traveler car  Prindle Part# 6004  Comparable to Hobie Cat® Part# 8020431
    1/4 X 1-3/8" Clevis Pin Murrays Part# 22-9804 Stainless steel clevis pin. Measurement is 1/4" diameter x 1-3/4" grip length (shoulder to the split ring hole). This pin replaces #56-7809, gooseneck clevis pin for Nacra 5.2 and all Prindles. Prindle Part# 6004 Comparable to Hobie Cat® Part# 8020431
    CLEVIS PIN 1/4 X 1-3/8"
    Misc
    Clevis Pin 1/4 x .83" Murrays Part# 50-8020391 Hobie® factory clevis pin measures 1/4" diameter x .8285" grip length (shoulder to the split ring hole).
    CLEVIS PIN 1/4 X .83"
    Hobie
    Batten Cap Leech Adjustable H16 Jib Each Murrays Part# 012-3004-1 No more knots at the trailing edge. Adjust Hobie® 16 jib sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life. Individual cap. Sold Individually
    ADJUSTABLE LEECH JIB BATTEN CAP (EA)
    Tren-Tec
    O-Ring: 6" Screw-In Port Murrays Part# 001-4210OR ​Replacement “O” ring for 6″ port (hatch) #01-4210. Viking, Sea Dog
    O-RING: 6" SCREW-IN PORT
    MISC
    Spring 1/4" Stainless Steel Murrays.com Part# 001-0060 1/4" stainless steel spring as used in the Murrays Tiller Connection Kit (#01-2061) This spring fits on a 1/4 bolt. Specs: 1/2" Long x 3/8" OD
    Spring 1/4" Stainless Steel  Murrays Part# 001-0060 1/4" stainless steel spring as used in the Murrays Tiller Connection Kit (#01-2061)
    SPRING 1/4" (SS)
    Murrays Sports
    Stainless steel clevis pin. Measurement is 1/4" diameter x 5/8" grip length. Hobie part number 8020361, 8020381 and 8020380.
    1/4 X 5/8" Clevis Pin Murrays Part# 22-9802 Stainless steel clevis pin. Measurement is 1/4" diameter x 5/8" grip length (shoulder to the split ring hole).  Uses: Most commonly used to connect shrouds and forestays to 7 or 10 hole shroud adjusters on Hobie, Nacra and Prindle catamarans. Hobie 18 gooseneck vertex pin Hobie 18 outhaul car sheave pin Hobie Part# 8020361, 8020381 and 8020380
    CLEVIS PIN 1/4 X 5/8"
    Misc
    Black Mast Caution Decal Murrays Part# 50-13440000 The Decal Mast Caution Black Hobie® factory caution decal attaches to mast as a reminder to watch for overhead power lines when sailing and/or launching your boat.
    BLACK MAST CAUTION DECAL
    Hobie
    Clevis Pin 1/4X3/8 Murrays Part# 50-8020371 This is commonly used for Hobie Rigging parts. It has a 3/8" grip length. You can also use the 1/2" grip length pins also. Hobie Part# 8020371 or 8020370
    CLEVIS PIN 1/4 x 3/8"
    Hobie
    Out of Stock
    Decal Mast Caution Orange Murrays Part# 13440010 Hobie® factory decal attaches to mast as a reminder to watch for overhead power lines when sailing and/or launching your boat. Hobie Part# 13440010
    ORANGE MAST CAUTION DECAL
    Hobie
    Bolt Allen Head 5/16 18 X 1.5" (Stainless Steel) Murrays Part# 19-2229S Bolt Allen Head 5/16 - 18 X 1.5 (Stainless Steel) - replace hex head bolts used on Hobie 16, 17, 18, 20 Upper adjustable rudder castings. Limited space for Hex head requires thin walled 1/2" socket with 1/6" drive. Socket head bolt uses Allen head tool which is cheap, strong, and compact for on board storage and convenient adjustment.
    BOLT 5/16-18 X 1.5" (SS)
    Misc
    Harken 22mm Spring Murrays Part# 28-0071 Harken universal stand-up spring supports blocks on pad eyes, eyestraps, bases and traveler cars. Weight: .32 oz. This works well with snap shackle w/tack to upgrade a typical beachcat mainsheet system.
    HARKEN 22MM SPRING
    Harken
    Bolt Hex Head 5/16-18 X 1.5" Murrays Part# 19-2229 Use this stainless steel, 5/16-18 x 1-1/2" hex head bolt as beam strap bolt for Nacra. Substitute for Nacra Sailing factory item #30358. This bolt is also used to hold the cam stop plate on a Hobie Rudder Upper casting. Replaces Hobie Cat® Part# 8040301 and Murrays Part# 56-F164
    BOLT HEX HEAD 5/16-18 X 1.5"
    Misc
    Recently viewed