Hobie 18 Parts

Hobie 18 Parts

362 products

    Parts for your Hobie 18

    362 products
    Murrays Part# 001-0010 ​Use less effort to rig with the Easy Rigg downhaul tool, halyard tensioner and shackle tool. The ergonomic shape is easy to grip and pull and its long-wearing metal teeth grip 3/32″ to 3/16″ line. Available in black or bright assorted colors (yellow, red, green, and sometimes blue, as available) that help prevent loss. Hobie Cat® uses item #2065 for the Easy Rigg Tool.
    EASY RIGG TOOL
    Easy-Rigg
    Clamcleat (Aluminum) Murrays Part# 27-0702 Replace old, worn-out outhaul and downhaul Clamcleats®. Aluminum cleats are stronger than nylon and have increased wear resistance. Easy to mount. Line capacity is 1/8"-1/4".  2 5/8" hole spacing. This cleat is a substitution for Hobie Part# 61070000
    CLAMCLEAT (ALUMINUM)
    Clamcleat
    TRAMP CLAMP (10) Minimize chafing at trampoline stress points and reduce the possibility of the trampoline pulling out of the aluminum extrusion. Clamps slide into the aluminum extrusion track. 10 pieces, 1.5" long. By Tren Tec.™ Hobie Cat® uses #2066 for this item
    TRAMP CLAMP (10)
    Tren-Tec
    Out of Stock
    Hobie Spreader Covers Murrays part# 007-3262 These vinyl spreader bar end covers are real sail-savers! The black, smooth resilient covers protect the jib luff from wear and tear from cotter keys and sharp edges. Pair. Hobie Cat® factory item #3262.
    HOBIE SPREADER COVERS
    Hobie
    Out of Stock
    H18 Bow Tang Murrays Part# 50-60120000 Hobie Cat® factory replacement bow tang for Hobie® 18.
    H-18 BOW TANG
    Hobie
    Batten Cap Hobie Main Leech Murrays Part# 50-11323000 Hobie® factory replacement part number 11323000. Hobie batten cap are sold individually. Order batten tie separately; 18" of 1/8" line per batten cap is standard. Sold individually
    HOBIE MAIN LEECH BATTEN CAP
    Hobie
    H18 Angled Luff Batten Caps Murrays Part# 012-4005 No more battens poking through next to the mast. Ten angled Tren Tec luff caps for Hobie® 18 prevent batten splitting and align batten to the angle of the sail, increasing the life of your sail. Glue to the forward end of the batten. Hobie Part# 1563 Sold in packages of 10
    H-18 ANGLED LUFF BATTEN CAPS
    Tren-Tec
    Traveler Ball Bearing H18 Murrays Part# 50-61850000 The Traveler Ball Bearing H18 is the stock Hobie 18 Main sheet traveler car ball beaing. This ball can be used in place of cylinder bearing #50-61860000 to bring the traveler back to what came stock on the Hobie 18. The difference between the traveler ball and the cylinder is that the balls allow the car to move faster but they wear down quicker. Hobie has stopped making the Hobie 18 traveler balls, but Murrays found their source and made more!
    Hobie 18 main traveler car parts list - 6180001, 8040301, 61870000, 61880000, 60190000, 8050311, 61842000, 8060121, 61810000, 61830000, 61852000, 8020431
    H-18 TRAVELER BALL BEARING
    Murrays Sports
    Out of Stock
    Bolt Socket Head 3/8-16 X 3.75" Murrays Part# 50-8040561 Hobie® factory replacement 3/8-16 x 3.75" socket head bolt. Applications: Hobie 18 inboard front crossbar
    BOLT SOC HEAD 3/8-16 X 3.75"
    Misc
    Ronstan Series 20 Utility Block, Tube Rivet Murrays Part# 21-0661 Rontan's cheek block is a Hobie® 18 and Prindle downhaul and turning block. Stainless steel cheeks and Acetal sheaves ensure a long service life with virtually no maintenance. Hollow rivets in the block heads can be fitted with shackles, which can also be used to add a becket for extra purchase.
    RONSTAN MIDGET SINGLE BLOCK (CHEEK)
    Ronstan
    H18SX Bracket Wing Strut Murrays Part# 50-91490010 This is the bracket that the rear support arm of an H18SX wing uses. One is mounted to the wing and one is mounted to the rear hull of an H18SX per wing. Hobie Part# 91490010
    H-18SX BRACKET WING STRUT
    Hobie
    Ronstan bow shackle measurements
    RONSTAN 1/4" BOW SHACKLE
    Ronstan
    DIAMOND WIRE ROLLER
    Misc
    Batten Cap Jib Leech H16 Murrays Part# 50-2133000 Hobie® factory jib leech batten cap for Hobie® 16. For batten tie, use 18" of 1/8" Dacron® solid braid #39-0221. These are also used on the top two battens of a Hobie Wave and the top batten of a Hobie 18 Mainsail. Sold individually
    H-16 JIB BATTEN LEECH CAP (EA)
    Hobie
    Hobie Boom Blocker Hanger  Murrays Part# 50-10760000 Hobie factory boom block hanger for the Hobie 14, 16, 17 and 18. Hole spacing is 1-1/8".  Use four 6-4 rivets (#19-5031) for installation.
    HOBIE BOOM BLOCKER HANGER
    Hobie
    H18 Jib Furler Bearing (Cage) Murrays Part# 50-61930000 Hobie® factory replacement bearing cage for Hobie® roller furler drum #50-61900000. Hobie Part# 61930000
    H-18 JIB FURLER BEARING (CAGE)
    Hobie
    Clamcleat Leech Line Cleat Murrays Part# 27-0212 Jib halyard tensioning cleat for zippered luff jibs. The low-profile, white nylon Clamcleat® can be sewn or riveted onto sails and technical fabrics. It can be mounted in two positions on the sail. The tooth design allows a quick, positive lock that is easy to release. It is an ideal cleat for adjusting leech lines. Use a backplate when riveting a cleat onto fabric, as it will prevent the rivet pulling through. Includes: backing plate and 2x flare rivet
    CLAMCLEAT LEECH LINE CLEAT
    Clamcleat
    3-Hole Pad Kit Murrays Part# 001-0110 This base kit is for Harken®, Hobie® or Murray 360 cleats without swivel base adapters. Kit includes one 3-hole base, one swivel base adapter (#25-3001), plus three #10 FHSMS (#19-1626). Ronstan swivel 360 cleats include swivel base adapters, so this kit is not necessary. Fits Hobie® or Prindle elliptical crossbar.
    3-HOLE PAD KIT
    Murrays Sports
    Murrays Part# 50-10432000 Hobie® factory 2½" spring for Hobie® 16 lower rudder casting. This spring is longer and stiffer than original equipment (#50-10430000), providing additional tension if you are having trouble with rudder kick up. Used on Hobie 18 Rudder Systems from late 80s through now. Used on Hobie 16 Rudder Systems after 1983 Used on Hobie Getaway Rudder Systems pre- EZ Loc Hobie part number 10432000
    HOBIE RUDDER SPRING-LONG
    Hobie
    Roller Furler Darby Ring (Large) Murrays Part# 50-8062511 Hobie® factory replacement large darby ring for roller furler. Hobie Part# 8062511
    ROLLER FURLER DARBY RING (LARGE)
    Hobie
    Dolphin Striker Post Sleeve Murrays Part# 50-61140000 Hobie® factory replacement dolphin striker post sleeve for Hobie 18 Hobie Part# 61140000
    H-18 DOLPHIN STRIKER POST SLEEVE
    Hobie
    Out of Stock
    Diamond Wire Tang Murrays Part# 50-61480000 Hobie® factory replacement diamond wire tang Hobie Part# 61480000
    DIAMOND WIRE TANG
    Hobie
    Kisme Kleet (4) Murrays Part# 005-1010
    KISME KLEET (4)
    Misc
    Hobie 20-style factory tiller connector post. Part of the Hobie 1953 tiller connection system. Hobie part number 40530000 and 40530001
    H-20 TILLER CONNECTOR POST
    Hobie
    Traveler Sheave H18 - 61890000 Murrays Part# 50-61890000 Hobie factory replacement sheave for Hobie 18 main traveler car. Hobie Part# 61890000
    H-18 TRAVELER SHEAVE
    Hobie
    Hobie 18 rudder plunger. Hobie Part number 50312201. Also use on the 17 as well as the older Wave and Getaway
    H-17/18/GETAWAY RUDDER CAST PLUNGER
    Hobie
    Rudder Casting Lock Spring Murray Part# 50-10430000 Hobie factory replacement 2-1/8" lock spring for rudder casting. Replace rudder springs with this original spring supplied on Hobie® 14, 16, (pre 1983) 17 and 18. Compare to HC part number 10430000 H14, H16, H17, H18, H20
    HOBIE RUDDER SPRING
    Hobie
    RUDDER CASTING DELRIN SCREW - rudder locking adjustment screw - 60450000
    HOBIE DELRIN RUDDER SCREW
    Hobie
    H17/18 Mast Seal Plate Murrays Part# 50-61080000 Replacement mast seal plate for the Hobie 17 or Hobie 18.  Hobie Part# 61080000
    H-17/18 MAST SEAL PLATE
    Hobie
    H18 Mast Head/Base Sheave Murrays Part# 50-60620000 Factory replacement sheave for Hobie 18 mast head/base and outhaul assembly. Specs: 1" Diameter x 3/8" wide and 1/4" hole. Also used as traveler control line turning sheave on 2005 and newer Hobie 16 sailboats. Applications: Hobie 18 - Mast head halyard sheave ; mast base halyard sheave ; outhaul car sheaves. Hobie 16 - Jib Traveler line sheave. (in the H16 Race Corner Castings) use 50-8011251 Rivet
    H-18 MAST HEAD/BASE SHEAVE
    Hobie
    H18 Traveler Roller Skid Murrays Part# 50-61810000 Hobie® factory replacement roller skid for Hobie® 18 main traveler.
    Hobie 18 main traveler car parts list - 6180001, 8040301, 61870000, 61880000, 60190000, 8050311, 61842000, 8060121, 61810000, 61830000, 61852000, 8020431
    H-18 TRAVELER ROLLER SKID
    Hobie
    Out of Stock
    H-18 CLASS SAIL INSIGNIA
    Hobie
    Batten Cap Main Luff (EA) Murrays Part# 50-11322011 Main luff batten cap for Hobie Cats are sold individually. Order batten tie separately; 18" of line per batten cap is standard. Hobie® factory replacement part.
    MAIN LUFF BATTEN CAP (EA)
    Hobie
    Ronstan Series 19 C-Track End Cap Murrays Part# 21-0366 These are End Stops for the new C-Track by Ronstan. Similar to the stainless tracks used on H18 and H16 in the past. Track end, plastic Best replacement for End stop for 5/8" jib track as on Hobie® 16 or Hobie® 18. The end stop can be fastened with #19-1620 screw or #19-5021 6-4 countersunk rivet. Compare to Hobie Cat part #20260000.
    RONSTAN JIB TRACK END CAP
    Ronstan
    Hobie Cat #80550005 Main sail batten pocket protector kit. Hobie, Nacra, Prindle.
    MAIN SAIL POCKET PROTECTOR KIT
    Murrays Sports
    Sister Clip Micro  Murrays Part# 004-7730 The stainless steel micro sister clip is a quick connector with no moving parts. The micro sister clip does not have a slot.
    SISTER CLIP MICRO (EA)
    Murrays Sports
    Ronstan Stainless Steel D Shackle, 3/16" Pin, Slotted Head Murrays Part# 21-0616 Ronstan stainless D shackle has 3/16" diameter pin. This shackle is a substitute for Hobie® item #11220000, #SP0051 and #SP0052.
    RONSTAN 3/16 D SHACKLE
    Ronstan
    Ronstan Stainless Steel Bow Shackle, 3/16" Pin, Coined Head Murrays Part# 21-0634 Solid stainless steel bow shackle has 3/16" diameter pin.  UDL BL - The “Uniformly Distributed Load” breaking load of the shackle; the load is applied across the full span of the shackle pin. PL BL - The “Point Load” breaking load of the shackle; the load is only applied at the center or one side of the shackle pin.
    Ronstan bow shackle measurements
    RONSTAN STAINLESS STEEL BOW SHACKLE, 3/16" PIN, COINED HEAD
    Ronstan
    Quick-Release Pin Detent 1/4 X 1-1/2 Murrays Part# 18-4D150 The Quick-Release Pin Detent 1/4 X 1-1/2 is an economical, quick connection for Hobie 16 mast step pin. A spring-loaded ball exerts sufficient pressure to help avoid accidental release. Measurements are 1/4″ diameter x 1-1/2″ maximum grip length (distance from the shoulder to the locking ball bearings).
    QUICK RELEASE DETENT PIN 1/4 X 1-1/2"
    Misc
    Ronstan Clevis Pin Retaining Clip Murrays Part# 21-0413 The Ronstan Spring Clip is a stainless spring clip for quick rudder pin removal or Hobie 14, 16, 17, 18, 20, Wave and Getaway models. This handy little pin is also called a hairpin cotter, bridge pin, hitch pin clip or R clip. Great convenience item for all boats with rudder pins, ie: Hobie, Nacra and Prindle 15, 16, 18, 18-2, 19, 19MX, and Escape. Ronstan Part# RF413
    RONSTAN CLEVIS PIN RETAINING CLIP
    Ronstan
    Recently viewed