Hobie 14 Parts

265 products

    Parts to fit your Hobie 14

    265 products
    Hobie Main Sail Headboard w/ rivets Replacement Hobie factory Hobie Main Sail Headboard w/ rivets. Hobie part #68330011
    HOBIE ALUMINUM HEADBOARD WITH RIVETS
    Hobie
    RUDDER LOCKING KIT Hobie 16 Murrays Part# 50-10311900 Hobie factory rudder locking kit for Hobie 14 or 16 includes one each plunger, 2-1/2" spring (#50-10432000), and Delrin screw. Delrin screw is 3/4-10 thread. In many cases you can drill it out with a 5/8" drill bit and then get a 3/4-10 tap to clear the threads.
    H-14/16 RUDDER LOCKING KIT
    Hobie
    Ronstan Toggle Pin with Lanyard 1/4 X 5/8" Murrays Part# 21-1155L ​Stainless steel 1/4" diameter toggle pin replaces 5/8" clevis pin. Secure quick connect/disconnect clevis pin with a lanyard so you loose it.
    RONSTAN TOGGLE PIN WITH LANYARD 1/4 X 5/8"
    Ronstan
    7"X17" Zip Pouch-Assorted Colors Murrays Part# 31-1402 The Murrays Zip Pouch 7"X17" is constructed of rugged, water-resistant material with plastic hooks at each end to attach to the center or aft tramp lacing. The pouch provides handy storage for replacement parts, keys, and safety gear. Assorted colors. We have this pouch made for us right here in the U.S.A. Compare to Hobie Cat® stow bag #72000B and 72005B
    7"X17" ZIP POUCH-ASSORTED COLORS
    Murrays Sports
    H14/16 Aluminum Rudder Pins Murrays Part# 001-2272 Aluminum rudder pins are standard on Hobie® 14 and 16 and are good for all-around, low maintenance use. Pair of 3/8" x 8" rudder pins with cotter pins. New One piece rudder gudgeons have been produced with a slightly smaller metric hole size. If you have a 2020 and newer boat or 2020 and newer one piece gudgeons, our aluminum rudder pins may require force to install and be difficult to remove. The stainless pins are a better fit. Sold in pairs
    Aluminum rudder pins are standard on Hobie® 14 and 16 and are good for all-around, low maintenance use. Pair of 3/8" x 8" rudder pins with cotter pins. New One piece rudder gudgeons have been produced with a slightly smaller metric hole size. If you have a 2020 and newer boat or 2020 and newer one piece gudgeons, our aluminum rudder pins may require force to install and be difficult to remove. The stainless pins are a better fit. Sold in pairs Each pair is equivalent to two Hobie Cat® item# 20880001 (each)
    H-14/16 ALUMINUM RUDDER PINS
    Murrays Sports
    H14 Mast Spinnaker Tang Murrays Part# 50-10690000 Hobie® factory replacement spinnaker tang or mast tang for Hobie 14 or Wave. Use six 6-4 rivets (#19-5031) and six 6-4 casings (#19-5020) for installation.
    HOBIE 14/WAVE MAST TANG
    Hobie
    H14/16/18 Gooseneck Boom Pin Murrays Part# 50-10772010 Hobie® factory gooseneck boom pin for Hobie® 14, 16 or 18.
    H-14/16/18 GOOSENECK BOOM PIN
    Hobie
    Tracker Hinge Upright Murrays Part# 007-1054 The standard replacement hinge upright for the tracker on all Hobie® 14, 16 and newer 17's. Fits: Hobie Getaway Main Traveler Car Hobie Cat® Part# 11840100
    TRACKER UPRIGHT HINGE
    Hobie
    H14 Bridle 1/8" One bridle for Hobie® 14 constructed of 1/8" 1x19 wire to factory specifications. Compare to Hobie Cat® #10822101. This is for Hobie 14s without jibs. Murrays PN 002-0114-01 002-0114-02
    H-14 Bridle 1/8" Single bridle for Hobie 14 constructed of 1/8" 1x19 wire to factory specifications.  This is for Hobie 14s without jibs. Use this page to order product numbers: 02-0114-01 White 02-0114-02 Black Compare to Hobie Cat® #10822101
    H-14 BRIDLE 1/8" WIRE
    Murrays Sports
    Out of Stock
    5"X12" Zip Pouch-Assorted Colors Murrays Part# 31-1401 The Murrays Zip Pouch 5"X12" is constructed of rugged, water-resistant material with plastic hooks at each end to attach to the center or aft tramp lacing. The pouch provides handy storage for replacement parts, keys, and safety gear. Assorted colors. We have this pouch made for us right here in the U.S.A. Compare to Hobie Cat® stow bag #72000B and 72005B
    5"X12" ZIP POUCH-ASSORTED COLORS
    Murrays Sports
    Out of Stock
    Halyard 5"X 9" Zip Pouch-Assorted Colors Murrays Part# 31-1400 The Murrays 5" x 9" zippered halyard pouch is constructed of rugged, water-resistant material with plastic hooks at each end to attach to the tramp lacing. The off-center zipper is designed for easy stuffing of your boat's halyard. The pouch is also handy for storing replacement parts, keys, and safety gear. Assorted colors. We have this pouch made for us right here in the U.S.A. Compare to Hobie Cat® stow bag #72000B and 7
    HALYARD 5"X9" ZIP POUCH- ASSORTED COLORS
    Murrays Sports
    Hobie Halyard - Downhaul Cheek Block - 20710000 Murrays Part# 25-3340 The plastic sheave degrades and breaks on older Hobie® 16 downhaul cheek blocks and the entire block must be replaced. Also fits Sol Cat 18. Hole spacing 1/2" on center from side to side; 2-3/4" on center from end to end. To install, use four #19-5031 6-4 rivets and four #19-5020 sealing casings. Hobie Cat® Part# 20710000.
    HOBIE CHEEK BLOCK - 20710000
    Hobie
    DACRON INSIGNIA CLOTH - BLACK
    Murrays Sports
    H14 Masthead Sheave The Hobie 14 Mast head sheave - Old Style is the large plastic pulley sheave. Replacement for the sheave in the original all aluminum Hobie 14 mast that has a single large sheave in the mast head. Hobie 14 pre comptip masthead sheave. Measures 4" x 3/8" with a 3/8" hole. ​Requires a 3/8" x 1.5" clevis pin or bolt to install or the 51-14041713 Mast Head Sheave Pin. Hobie part number 14041712
    H-14 MASTHEAD SHEAVE
    Hobie
    Hobie 378 Replacement vane for Telo-Cat™ and Black Max is constructed of tough, high-impact plastic vane with visible trim markings.
    TELO-CAT REPLACEMENT VANE - DISCONTINUED
    Davis
    The Murrays Rudder Cam Sister Screws: Hobie 14, Hobie 16 are a pair of sister screws for Hobie 14 and 16 rudder cams. These pins are much easier to install and remove than the stock pin and they are reusable! Sold in pairs Hobie Cat Part# 10470000 Hobie Part# 5201
    The Murrays Rudder Cam Sister Screws: Hobie 14, Hobie 16 are a pair of sister screws for Hobie 14 and 16 rudder cams. These pins are much easier to install and remove than the stock pin and they are reusable! Sold in pairs Hobie Cat Part# 10470000 Hobie Part# 5201
    H-14/16 RUDDER CAM SISTER SCREWS
    Murrays Sports
    Tiller Connection Kit Murrays Part# 001-2061 The Murrays Tiller Connection Kit assures consistent rudder alignment through the full rudder sweep. Spring-loaded half balls and contoured spacers take the slop out of the tiller-to-crossbar connection on Hobie Cats. Racing class legal. Each kit contains 2 connectors to join the tiller crossbar to the tiller arms. Compare to Hobie Cat® #3052. Applications:; Hobie 14, 16, 17, 18, 18SX
    Hobie, Nacra, Prindle Tiller Connection Kit Murrays Part# 001-2061 The Murrays Tiller Connection Kit assures consistent rudder alignment through the full rudder sweep. Spring-loaded half balls and contoured spacers take the slop out of the tiller-to-crossbar connection on Hobie Cats. Racing class legal. Each kit contains 2 connectors to join the tiller crossbar to the tiller arms. Applications:  Hobie 14, 16, 17, 18, 18SX Sold in pairs Compare to Hobie Cat® Part#
    TILLER CONNECTION KIT (PR)
    Murrays Sports
    V JAM CLEAT BOOM (3/16" HOLES)
    Hobie
    Hobie Shroud Anchor Bar Murrays Part# 50-50101701 This is the bar that the shroud anchor pins screws into to secure the shrouds on. Shroud anchor bar for Hobie Cat masts (replaces the nut used on older models). Use with the anchor pin to secure under the lip of the hull. Stainless steel Length: 3.5 inches Application: Hobie 14/16/17/18 sailboats Compare to Hobie Part# 50101701
    HOBIE SHROUD ANCHOR BAR
    Hobie
    H14/16 Gooseneck Slide Murrays Part# 50-10772001 ​Gooseneck slide for Hobie® 14 or 16 is a factory replacement part.
    H-14/16 GOOSENECK SLIDE
    Hobie
    Out of Stock
    Ronstan Single Block, Ferrule Murrays Part# 21-0469 This is the original clew block on most of the old Hobie cat Sailboats. This will work as a replacement jib clew block for Hobie® 14, 16 and 18 cats. Lightweight stainless block with ferrule has 1-1/8" x 5/8" sheave diameter, Delrin bearing and 1/2" line capacity. SWL: 950 lbs. This is a great option if you're looking to use a larger line diameter on your sheets or want the classic look.
    RONSTAN SINGLE BLOCK WITH FERRULE
    Ronstan
    Quick Release Pin Deluxe  3/16 X 3/4" Murrays Part# 18-3M075 This Quick Release Pin features 2 locking balls for a extra secure grip, and a push button deluxe dished head with a hole for lanyard attachment. The Deluxe pin is quick and easy to remove and install, and makes getting on and off the water quicker and easier.
    QUICK RELEASE PIN DELUXE 3/16 X 3/4"
    Misc
    SUPER GOOSE H-17/18/20/21 This upgraded gooseneck by Tren Tec is constructed from a solid block of 6061-T6 aluminum and then finished with a coat of black hardkote anodizing. The Super Goose is for Hobie® 17 (newer), 18, 20 and 21; not compatible with older Hobie® 17 model. Hobie part number 1510
    H-17/18/20/21 SUPER GOOSE
    Tren-Tec
    Hobie Shroud Adjuster Covers 11″ Pair are vinyl covers that protect the crew from metal shroud adjusters and can prevent de-masting by protecting the split rings. Includes two adjuster covers, one for each side of the boat. Available in white and black. Compatible with al beach cats: Nacra, Prindle, A-Cat, Dart, Sol Cat, G-Cat...
    11" SHROUD ADJUSTER COVERS
    Hobie
    Out of Stock
    Hobie Tiller End Cap Murrays Part# 50-10400010 Tiller arm end cap for Hobie Cats is a factory replacement part. Use two 6-6 rivets (item #19-5032) for installation.
    HOBIE TILLER END CAP
    Hobie
    H14/16 Upper Gudgeon Murrays Part# 25-3351 This latest, strongest design with welded sleeve bushings provides large, smooth bearing surfaces between rudder pins and gudgeons. Replace flared gudgeons with their sharp edges and point loading that can cause early rudder pin failure. For Hobie® 14's, 16's and 17, order separate upper and lower gudgeons.  For all other Hobie® cats Part# 25-3352 for both gudgeons. Each This gudgeon is a replacement for item #50101301
    Upper rudder gudgeon for the Hobie 14 and 16. This updated, strongest design with welded sleeve bushings provides large, smooth bearing surfaces between rudder pins and gudgeons. Replace flared gudgeons with their sharp edges and point loading that can cause early rudder pin failure. For Hobie 14's, 16's and 17, order separate upper and lower gudgeons.  For all other Hobie® cats Part# 25-3352 for both gudgeons. Each This gudgeon is a replacement for item #50101301
    H-14/16 UPPER GUDGEON
    Murrays Sports
    SAIL NUMBER 14" U-CUT BLACK
    Murrays Sports
    Ronstan Toggle Pin 15.9mm Long 6.4mm Diameter Murrays Part# 21-1155 Replaces 1/4" diameter clevis pin of same grip length. Also available with a lanyard 21-1155L
    RONSTAN TOGGLE PIN 1/4 x 5/8"
    Ronstan
    Out of Stock
    Coffee Marine Bridle Vane Replacement Vane Murrays PN 001-7050-G Sensitive, rigid and light! The classic bridle vane for the Hobie 16 and other racing cats. These are made in our warehouse and will fit the Hobie Bridle Vane assembly or the classic Coffee Marine assemblies. The Coffee Marine vanes are slightly more rigid than the Hobie wind vane, making them last longer and less likely to flap in the wind. Compatible with Hobie Bridle vanes. Hobie part number CM7703
    Coffee Marine Bridle Vane Replacement Vane
    Murrays Sports
    SAIL "HC" LOGO U-CUT PR BLACK
    Murrays Sports
    Kit for Hobie® 14 or 16 includes 16 pieces: mast hinge pin, clevis pin assortment and split ring assortment. Compare to Hobie Cat® #30303.
    H-14/16 PINS AND RINGS KIT
    Murrays Sports
    Ronstan 5/16 bow with hole shackle RF638 - Hobie 20700001 and SP150081
    RONSTAN 5/16" BOW SHACKLE WITH HOLE
    Ronstan
    Hobie Sail Feeder Kit Murrays Part# 50-80100501 Replacement sail feeder for use on many Hobie Cat mast assemblies to make raising your mainsail easier than ever! Hobie®'s Sail Feeder helps the sail feed evenly into the mast track without catching and/or tearing the sail.
    Hobie Sail Feeder Kit Murrays Part# 50-80100501 Replacement sail feeder for use on many Hobie Cat mast assemblies to make raising your mainsail easier than ever! Hobie's Sail Feeder helps the sail feed evenly into the mast track without catching and/or tearing the sail.
    HOBIE SAIL FEEDER KIT
    Hobie
    Chain Plate "Turbo" Murrays Part# 50-10300000 Hobie® factory replacement chain plate for Hobie® 14 Turbo. Use three 6-4 rivets (#19-5031) for installation.
    H-14 CHAIN PLATE "TURBO"
    Hobie
    10 Hole Hobie shroud adjuster
    10 HOLE SHROUD ADJUSTER
    Misc
    Tracker Traveler Sheave Replacement Kit Murrays Part# 007-1059 The standard replacement sheave for the tracker traveler on all Hobie® 14, 16 and newer 17's.  Tracker is the term used by Hobie for the rear traveler car. This can also be considered a traveler sheave. Fits Hobie Getaway Main Traveler Car. Hobie® Part# 11880000
    TRACKER TRAVELER SHEAVE REPLACEMENT KIT
    Hobie
    Rudder Pins H14/16 Pair (Nylon) Murrays Part# 001-2271 Nylatron rudder pins are sacrificial for use in the surf (they'll break before your rudder system does) and should be inspected often for wear. Pair of 3/8" x 8" rudder pins with cotter pins for Hobie® 14 or Hobie® 16. Each pair is equivalent to two Hobie Cat® item #10881000 Sold in pairs
    H-14/16 NYLON RUDDER PINS PR
    Murrays Sports
    Ronstan Stainless Steel Bow Shackle, 5/16" Pin, Coined Head with Hole Murrays Part# 21-0636 The Ronstan 5/16 Bow Shackle has 5/16" diameter pin. Compare to Hobie® #20700001 and SP150081. Standard all Hobie, Nacra and Prindle catamarans to attach the standing rigging to the mast tang.
    Ronstan bow shackle measurements
    RONSTAN 5/16" BOW SHACKLE
    Ronstan
    Hobie trapeze shock cord 20730001 and 20730002
    H-14/16 TRAP SHOCK CORD
    Murrays Sports
    ELONGATED TRAPEZE RING Large trapeze ring made of solid 316 stainless steel for strength and longevity. AKA: dog bone, harness ring, harness loop, trap ring, trapeze ring.  Hobie part number 2002, compare to Hobie part number 2001 Length: 7-1/2"
    ELONGATED TRAPEZE RING
    Misc
    Recently viewed