Hobie 14 Parts

265 products

    Parts to fit your Hobie 14

    265 products
    Hobie Gooseneck Hinge Vertex Murrays Part# 50-50772031 Hobie® factory replacement gooseneck vertex for all Hobie® Cats. Hobie Part# 50772031
    HOBIE GOOSENECK HINGE VERTEX
    Hobie
    Out of Stock
    Swivel Mount Base with Fasteners Murrays Part# 007-1162 The offset base pad kit fits Hobie® and Prindle elliptical crossbars. Includes injection-molded plastic base and fasteners. Replacement fasteners are also available (requires 3 self-tapping screws #19-1620, 1 machine screw #19-1516, and 1 nut #19-2016). Hobie Cat® Part# 1162
    PRINDLE SWIVEL MOUNT BASE WITH FASTENERS
    Hobie
    H14/16 Main Halyard Hook Murrays Part# 25-3330 The main halyard hook is used on the Hobie 14, Hobie 16, Wave, Getaway, Prindles, Sol Cats and Nacras that use a wire halyard. Use two 6-4 rivets (#19-5031) and two casings (#19-5020) for installation. Hobie part# 10680000 Nacra part number 6812
    H-14/16 MAIN HALYARD HOOK
    Hobie
    SMALL BLOCK W/REMOVABLE SHEAVE This small block is used on trapeze adjustment systems where the removable sheave enables installation without cutting wires. Specifications: 1-3/16" removable sheave, Teflon® bearing and 5/16" line capacity. Hobie item #3103
    SMALL BLOCK W/REMOVABLE SHEAVE This small block is used on trapeze adjustment systems where the removable sheave enables installation without cutting wires. Specifications: 1-3/16" removable sheave, Teflon® bearing and 5/16" line capacity. Hobie item #3103
    SMALL BLOCK WITH REMOVABLE SHEAVE
    Murrays Sports
    Hobie Rudder Cam Hobie part number 10480000 Hobie factory replacement cam. Rudder cams should be inspected and replaced periodically. Always replace cams that are bent out of shape. Used on all Hobie Catamarans with metal housing rudder systems. Compatible on all Hobie 14, 16, 17, 18, 20, 21SC and 21SE as well as older Wave and Getaway models. Not compatible with the Hobie Wave and Getaway EZ Loc plastic rudder housing rudder system.
    HOBIE RUDDER CAM
    Hobie
    Out of Stock
    Boom End Cap H14/16 Forward Murrays Part# 50-10740011 Hobie® factory replacement end cap for the forward end of Hobie® 14 or 16 boom. Also for Hobie® 21SC. Use three #19-5032 6-6 rivets for installation.
    H-14/16 FORWARD BOOM END CAP
    Hobie
    Rudder Return Kit for H14/16-Inter Murrays Part# 012-2049 This Rudder Return Kit for H14/16-Inter by Tren Tec eliminates kick-up. Rudders return to down position easily with one hand and tension holds rudder down if a cam fails. Accommodates both rudders. Use this page to order product numbers 12-2049 (for Hobie® 14/16/Inter; Hobie Cat® item #1544)) and 12-2059 (for Hobie 17/18/21)
    H-14/16 INTER RUDDER RETURN KIT
    Tren-Tec
    H14/16 Bow Tang Murrays Part# 50-20120000 Hobie® factory replacement bow tang for Hobie® 14, 16 or Getaway. Use #19-3530 screw and #19-2520 nylock nut on Hobie 16; use #19-3530 screw on Hobie 14. The original Hobie® 14 tang is no longer available. 20120010
    Hobie factory replacement bow tang for Hobie 14, 16 or Getaway. Use #19-3530 screw and #19-2520 Nylock nut on Hobie 16; use #19-3530 screw on Hobie 14. The original H14 tang is no longer available. Hobie Part# 20120000 and 20120010
    H-14/16 BOW TANG
    Hobie
    Shroud Stay Adjuster 7 Hole Murrays Part# 25-3310 Stainless steel shroud adjuster with seven 1/4" holes. ​Use #22-9802 clevis pin at top and #22-9808 at bottom. Fits: H14/16/18/20, Wave and Getaway. Compare to Hobie Part# 20830010 Nacra - Prindle part number 9893
    SHROUD STAY ADJUSTER 7-HOLE
    Murrays Sports
    Harken Cleat Adapter with Hardware Murrays Part# 007-50010 Hobie Factory Part 50010
    CLEAT ADAPTER PLATE WITH HARDWARE
    Hobie
    H14/16 Gooseneck Downhaul Ring Murrays Part# 50-10772070 ​Gooseneck downhaul ring for Hobie® 14 or 16 is a factory replacement part.
    H-14/16 GOOSENECK DOWNHAUL RING
    Hobie
    Hobie Tiller Extension Hinge Murrays Part# 50-10532010 Hobie® factory replacement tiller extension hinge for #50-20550001 Hobie® Fiberglass tiller extension. Also used on Nacra tillers. Hobie Part Number: 10532010
    Hobie Tiller Extension Hinge Hobie Part number 10532010 Hobie factory replacement tiller extension hinge for #50-20550001 Hobie Fiberglass tiller extension. Also used on Nacra tillers. Hobie Part# 10532010
    HOBIE TILLER EXTENSION HINGE
    Hobie
    Murrays Part# 001-0062 Replacement tiller yoke assembly for all hiking sticks sold by Murrays. Used to connect the tiller extension to the tiller crossbar. Includes two contoured spacers that provide a solid platform for the yoke to sit on. Compare to Hobie Cat® Tiller yoke assembly #3205 or NACRA connection part tiller/joystick #31072 Applications: All Hobies and Prindles Tiller Yoke Assembly: 1
    Tller connection kit - yoke assembly - Hobie, Nacra, Prindle
    TILLER YOKE ASSEMBLY WITH SPACERS
    Murrays Sports
    EASY RIGG TOOL GREEN
    Murrays Sports
    EASY RIGG TOOL
    Easy-Rigg
    TRAMP CLAMP (10) Minimize chafing at trampoline stress points and reduce the possibility of the trampoline pulling out of the aluminum extrusion. Clamps slide into the aluminum extrusion track. 10 pieces, 1.5" long. By Tren Tec.™ Hobie Cat® uses #2066 for this item
    TRAMP CLAMP (10)
    Tren-Tec
    Batten Cap Hobie Main Leech Murrays Part# 50-11323000 Hobie® factory replacement part number 11323000. Hobie batten cap are sold individually. Order batten tie separately; 18" of 1/8" line per batten cap is standard. Sold individually
    HOBIE MAIN LEECH BATTEN CAP
    Hobie
    H14/17 Adjustable Batten Leech Caps Murrays Part# 012-2003 No more knots at the trailing edge. Adjust Hobie® 14 or Hobie® 17 sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life. This Perfect Pocket kit by Tren Tec includes pre-cut line Hobie Part# 1521 Sold in packages of 6
    H-14/17 ADJUSTABLE BATTEN LEECH CAPS (6)
    Tren-Tec
    Ronstan bow shackle measurements
    RONSTAN 1/4" BOW SHACKLE
    Ronstan
    Downhaul Cleat with Screws Murrays Part# 001-1020 The Downhaul Cleat Kit is for mounting in mast track (such as Hobie 16) and includes cleat, screws and channel inserts. Center-to-center hole spacing is 1-1/8". We have another kit for the halyard cleats on the side of the mast that includes rivets.
    DOWNHAUL CLEAT WITH SCREWS
    Murrays Sports
    Halyard Cleat Kit with Rivets Murrays Part# 001-1019 The Murrays Halyard Cleat Kit with Rivets pulls the halyard out of the way to keep the battens from hanging up on the halyard of an H16. The kit includes the halyard cleat and sealed stainless rivets. Center-to-center hole spacing is 31mm. *Photo is out of date and kit no longer comes with casings as the rivets that are included come sealed. Compare to Hobie Cat Part 10730000
    HALYARD CLEAT KIT WITH RIVETS
    Murrays Sports
    Out of Stock
    Hobie Mast Step Pin 3/16 x 2 1/8" - 8020080 Replacement Hobie 14 and Hobie 16 mast step pin. Measures 3/16" x 2-1/8" Used with the Hobie mast step link kit 21380001 for raising and lowering the mast on a Hobie 14 and 16. Also called Hobie 16 mast hinge pin, mast step hinge pin, mast base pin, mast step link pin... Hobie part number 8020080
    HOBIE MAST STEP PIN 3/16 X 2 1/8 - 8020080
    Hobie
    Hobie 16 gooseneck bearing kit. Tren Tec. Murrays Marine. Hobie Cat part number #1511
    Murrays Gooseneck Bearing Kit Hobie 14 & 16 instructions. Hobie Cat part number #1511
    H-14/16 GOOSENECK BEARING KIT
    Tren-Tec
    Out of Stock
    Mast Float Attachment Kit: H14/16 Murrays Part# 007-30116 This attachment kit for Hobie® 14 or 16 comes with Hobie® Mama and Baby Bobs, but is also offered separately here.
    H-14/16 MAST FLOAT ATTACHMENT KIT
    Hobie
    Out of Stock
    Hobie Boom Blocker Hanger  Murrays Part# 50-10760000 Hobie factory boom block hanger for the Hobie 14, 16, 17 and 18. Hole spacing is 1-1/8".  Use four 6-4 rivets (#19-5031) for installation.
    HOBIE BOOM BLOCKER HANGER
    Hobie
    Hobie 16 mast bearings. Teflon mast chips, Hobie part number 11110005
    Hobie 16 Mast bearing kit comes with 3 Teflon mast pivot bearings for the Hobie 14, and 16 as well as the older Waves and getaways. Mast bearings sit between the mast step casting and the mast base casting to reduce friction and allow for easier mast rotation and prevent metal-to-metal contact. The mast chips will form to mast base with first use. Mast bearing should be replaced about once a year, depending on use. Compare to Hobie part# 11110005
    H-14/16 MAST BEARING (3-PKG)
    Murrays Sports
    3-Hole Pad Kit Murrays Part# 001-0110 This base kit is for Harken®, Hobie® or Murray 360 cleats without swivel base adapters. Kit includes one 3-hole base, one swivel base adapter (#25-3001), plus three #10 FHSMS (#19-1626). Ronstan swivel 360 cleats include swivel base adapters, so this kit is not necessary. Fits Hobie® or Prindle elliptical crossbar.
    3-HOLE PAD KIT
    Murrays Sports
    H14 Angled Luff Caps Murrays Part# 012-2006 No more battens poking through next to the mast. Tren Tec angled luff caps for Hobie® 14 prevent batten splitting and align batten to the angle of the sail, increasing the life of your sail. Glue to the forward end of the batten. Hobie Part# 1561 Sold in packages of 6
    H-14 ANGLED LUFF CAPS (6)
    Tren-Tec
    Out of Stock
    H14/16 Clear Anodized Aft Boom End Cap Murrays Part# 10741031 Replacement rear boom end cap for Hobie® 14 or 16 is Hobie® factory item #10741031. Use two 6-6 rivets (#19-5032) for installation. Hobie Part# 10741031
    H-14/16 CLEAR ANODIZED AFT BOOM END CAP
    Hobie
    Save $6.99
    Kisme Kleet (4) Murrays Part# 005-1010
    KISME KLEET (4)
    Misc
    Rudder Casting Lock Spring Murray Part# 50-10430000 Hobie factory replacement 2-1/8" lock spring for rudder casting. Replace rudder springs with this original spring supplied on Hobie® 14, 16, (pre 1983) 17 and 18. Compare to HC part number 10430000 H14, H16, H17, H18, H20
    HOBIE RUDDER SPRING
    Hobie
    RUDDER CASTING DELRIN SCREW - rudder locking adjustment screw - 60450000
    HOBIE DELRIN RUDDER SCREW - 60450000
    Hobie
    Out of Stock
    H16 Rudder Casting Cam Pin 1/4" Murrays Part# 50-10470000 Hobie® factory replacement flare cam pin for Hobie® 16 rudder casting is 1/4" diameter. Flaring this pin can be difficult, so Murrays recommends using #01-2051 sister screws in place of this stock pin.
    H-16 RUDDER CAST CAM PIN 1/4"
    Hobie
    H14/16 Gooseneck Shackle Murrays Part# 50-10772020 Hobie factory replacement gooseneck shackle for Hobie 14 and Hobie 16. Uses a 3/16 x 7/8" clevis pin to connect to the main sail tack. Quick release upgrade option is the 3/16 x 3/4" Quick Release Pin, part #18-3M075L Some newer boats and racers replace the downhaul ring with a second Gooseneck Shackle.
    H-14/16 GOOSENECK SHACKLE
    Hobie
    Out of Stock
    Decal Sail H14 Class Insignia Murrays Part# 50-12440000 Hobie 14 round sail class insignia decal is a Hobie® factory replacement item. Hobie Part# 12440000
    H-14 SAIL CLASS INSIGNIA
    Hobie
    Batten Cap Main Luff (EA) Murrays Part# 50-11322011 Main luff batten cap for Hobie Cats are sold individually. Order batten tie separately; 18" of line per batten cap is standard. Hobie® factory replacement part.
    MAIN LUFF BATTEN CAP (EA)
    Hobie
    Dolphin Striker Eye Bolt H14 Murrays PN 001-0106 This part is used as part of the Murrays H14 Dolphin Striker Kit. Replacement stainless steel post for #01-2083 dolphin striker for Hobie® 14. 19-2524 nylock nut is needed and not included with this part.
    H-14 DOLPHIN STRIKER EYE BOLT
    Murrays Sports
    Hobie Cat #80550005 Main sail batten pocket protector kit. Hobie, Nacra, Prindle.
    MAIN SAIL POCKET PROTECTOR KIT
    Murrays Sports
    H14/16 Rudder Return Hand Shock Cord Murrays Part# 001-2240 Two 32" shock cords with balls keep your Hobie® 14 or 16 rudders down when the cams don't! Order Kisme Kleets #05-1010 separately, if needed.
    H-14/16 RUDDER RETURN HAND SHOCK CORD
    Murrays Sports
    Mast Cleat Murrays Part# 011-6481 The Mast Cleat is a can be used as a downhaul / halyard cleat on a Hobie 14 and or 16. Compare to Hobie Cat® factory item #10730000. 31mm Center to Center.
    MAST CLEAT
    Murrays Sports
    Recently viewed