Hobie 14 Parts

241 products

    Parts to fit your Hobie 14

    241 products
    Out of Stock
    Third Hand
Murrays Part# 007-2040
This is the closest thing to "self-steering" a Hobie® 14 or 16. The handy little device grips the hiking stick and holds it at a position of your choice. Great for light air sailing or when paddling in if the wind dies. It also keeps the rudders from flopping around when on the beach. Attaches at each end of the traveler track. Hobie Cat® item #204.
    THIRD HAND
    Hobie
    $59.99
    Shock Cord Tramp Lacing Kit H14/16/18

Murrays Part# 001-2241

Shock Cord Tramp Lacing Kit H14, 16, 18 is for the recreational sailor who is lacing a trampoline. Shock Cord is usually the better choice over line tramp lacing. Just "set it and forget it" because shock cord maintains the tension you set when lacing your tramp. Shock cord also reduces tramp and grommet wear because the load is spread over multiple grommets, especially when walking on the tramp. The latest technology shock cord used in our kits
    H-14/16/18 SHOCK CORD TRAMP LACING KIT
    Murrays Sports
    $55.00
    Murrays Part# 001-2050

The Hobie Rudder Cam Kit: Hobie 14, Hobie 16 are replacement rudder cams to keep the rudder lock-down mechanism on your Hobie Cat® functioning properly. The Hobie® 14 or 16 kit includes two cams, two reusable, internally threaded sister screws for both sides, and instructions. Purchase the complete kit if your boat has the stock flare pins; purchase just the cams (#50-10480000 each) if your boat already has sister screws. 

Compare to Hobie Cat® #5202.
    H-14/16 RUDDER CAM KIT
    Murrays Sports
    $52.00
    H14 Straight Tiller Arm-Black

Murrays Part# 50-10382010

Hobie® factory replacement black straight tiller arm for Hobie® 14.

Hobie Part# 10382010
    H-14 STRAIGHT TILLER ARM-BLACK
    Hobie
    $49.99
    Quick Release Pin 1/4 X 1-1/4 with Lanyard

Murrays Part# 18-4M125L
    QUICK RELEASE PIN 1/4 X 1-1/4" WITH LANYARD
    Misc
    $47.00
    Out of Stock
    Deluxe Quick Release Pin 1/4 X 1 with Lanyard

Murrays Part# 18-4M100



This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. Uses:

Hobie boom Gooseneck quick connection pin on the 14, 16 and 18.
Hobie 18 main clew to outhaul car connection pin.



Compare to Hobie Cat #20305 PIN, QR 1/4 X 1 CUP

Upgrade for Hobie 8020410 and 8020411 clevis pin
    DELUXE QUICK RELEASE PIN 1/4 X 1" WITH LANYARD
    Misc
    $47.00
    H14/16/18/20/Wave Rudder Cam Stop Plate

Murrays Part# 50-20352000



Hobie factory replacement rudder cam plate for Hobie 14, 16, 17, 18 (1987 and later) and Wave (with aluminum castings).

Hobie Part# 20352000
    H-14/16/18/20/WAVE RUDDER CAM STOP PLATE
    Hobie
    $45.99
    Out of Stock
    Specs: 1/4" diameter x 1" maximum grip length (distance from the shoulder to the locking ball bearings).

Uses:

Hobie boom Gooseneck quick connection pin on the 14, 16 and 18.
Hobie 18 main clew to outhaul car connection pin.



Compare to Hobie Cat® Part# 20305 PIN, QR 1/4 X 1 CUP

Upgrade for Hobie Part# 8020410 and 8020411 clevis pin
    QUICK RELEASE DELUXE PIN 1/4 X 1"
    Misc
    $45.00
    RUDDER PINS W/BUSHINGS H14/16

Aluminum rudder pins for a Hobie 14 and 16. Includes cotter pins and 4 rudder bushings.

Hobie part numbers: 20880001 and 8062001
    RUDDER PINS W/BUSHINGS H14/16

Aluminum rudder pins for a Hobie 14 and 16. Includes cotter pins and 4 rudder bushings.

Hobie part numbers: 20880001 and 8062001
    H-14/16 RUDDER PINS WITH BUSHINGS
    Murrays Sports
    $45.00
    H14/16/18 Dyneema Race Tramp Lace Kit

Murray Part# 001-2242-1

Tramp Lace Kit H14 H16 H18 - Dyneema Race Kit uses Dyneema® which is the best choice for racers or other sailors looking for the ultimate in strength, light weight, and very low stretch characteristics in their tramp line lacing. Dyneema® has excellent ultraviolet and abrasion-resistance properties for longevity.
    H-14/16/18 DYNEEMA RACE TRAMP LACE KIT
    Murrays Sports
    $45.00
    Tiller Crossbar Adjustable Cap Kit

Murrays Part# 50-60400011M



Murrays Tiller Crossbar Adjustable Cap Kit installs in the end of the Hobie tiller crossbar and allows you to adjust the width of the crossbar which controls the angel of the rudders.

Hobie discontinued this part and this is a Murrays Replacement part that we have made here in California.

Applications: H14, H16, H17, H18, Hobie 18 SX tiller x-bar

Tiller Crossbar Adjuster: 1
    TILLER CROSSBAR ADJUSTABLE CAP KIT
    Murrays Sports
    $45.00
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone, trap handle
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone
    CAN'T MISS RINGS
    Murrays Sports
    $45.00
    Mast Rotation Control Arm

Murrays Part# 25-3040

Stainless mast rotation control arm is strong and smooth! Arm #25-3040 with 1/4″ hole is for all Hobies except for the Hobie® 17, Prindles and Nacras; Arm #25-3041 with 5/16″ hole is for Nacras, Prindles and the Hobie® 17. H17 uses #19-2235 bolt

Hobie Part# 61210001
    MAST ROTATION CONTROL ARM
    Murrays Sports
    from $44.95
    18SQ Forestay 5/32 Black
Murrays Part# 002-5045-02
Black coated forestay for your NACRA 18 Square built to original specifications.
    Black White
    H-14 FORESTAY 1/8" WIRE
    Murrays Sports
    $44.00
    H14/18 Jib Luff Zipper

Murrays Part# 50-62300000

Hobie® factory jib luff zipper for Hobie 14 or 18.

Hobie Part# 62300000
    H-14/18 JIB LUFF ZIPPER
    Hobie
    $40.99
    Out of Stock
    Murrays Part# 001-7050
The gold standard for catamaran racing has been the Coffee Marine Bridle Fly or the Hobie STD bridle vane that was designed based on it. The red plastic vane is very sensitive to wind shifts and easily mounts to the front of a Hobie 16, 14, Wave and all the Prindle Catamarans. With an adapter it can be mounted to any of the Hobiecat sailboats that use a furling drum. To start out, we are offering the standard length which extends about 13" and
Hobie part number 7703
    COFFEE MARINE BRIDLE VANE
    Murrays Sports
    $40.99
    Replace a 3/16" bow shackle with this quick-release version to add convenience. Can be used on 2-1/4" blocks. Compare to Hobie Cat® #3062.
    QUICK RELEASE 3/16" BOW SHACKLE
    Murrays Sports
    $40.00
    H14 Shroud 1/8"

One shroud (sidestay) for Hobie® 14 constructed of 1/8" wire to factory specifications.

Connect at top with #21-0635 1/4" bow shackle; connect to stay adjuster with #22-9802 clevis pin.

Use this page to order product numbers:

02-0104-01 White
02-0104-02 Black

Hobie Cat® Part# 10792100
    White Black
    H-14 SHROUD 1/8" WIRE
    Murrays Sports
    $40.00
    Downhaul Kit: H14/16
Murrays Part# 001-1028
This class legal 3:1 downhaul kit for Hobie® 14 or Hobie 16 includes Harken bullet block with becket and swivel, and 6 feet of 3/16" low-stretch, 8-strand line. This kit works with the stock downhaul horn cleat at the base of the mast.

This is a fantastic economical and simple solution for the recreational sailor.

Hobie part number 2081
    Downhaul Kit: H14/16

Murrays Part# 001-1028


This class legal 3:1 downhaul kit for Hobie® 14 or Hobie 16 includes Harken bullet block with becket and swivel, and 6 feet of 3/16" low-stretch, 8-strand line. This kit works with the stock downhaul horn cleat at the base of the mast.

This is a fantastic economical and simple solution for the recreational sailor.

Hobie part number 2081
    H-14/16 DOWNHAUL KIT
    Murrays Sports
    $39.00
    Harken 29mm Clew Block

Murrays Part# 28-0371



Harken's 29mm Carbo block assembly is designed to be sewn onto the clew of a sail. It can be used to replace the jib clew block on Hobie® 14 and 16. Specifications: 330 lb. SWL; 1000 lb. breaking strength; 5/16" maximum line diameter. 

On Hobie® 14 and 16, attach with #21-1032 twist pin halyard shackle.

Harken Part# 371
    HARKEN 29MM CLEW BLOCK
    Harken
    $37.26
    trapeze adjustment kit - 3102 - Murrays EZ Up Trap Kit
    EZ-UP TRAP KIT: NO-CUT (PR)
    Murrays Sports
    $36.00
    Adjustable Tiller Endcap

Murrays Part# 51-99000010



Extra long tiller crossbar end cap from Hobie Europe.

Pro Tip: Put some McLube One Drop or Corrosion X on the screw before installing to prevent seizing.
    ADJUSTABLE TILLER ENDCAP
    Murrays Sports
    $35.00
    H-14 TURBO BRIDLE 1/8
One bridle for Hobie 14 Turbo constructed of 1/8" 1x19 wire to factory specifications.

Turbo typically refers to the Hobie Factory Version that features a Hobie Roller furling drum, bridles connect to the drum with forks, and an under tramp jib block wire.

Use this page to order product numbers:

02-0114-21 White (compare to Hobie Cat® #10820011)
02-0114-22 Black bridle for Hobie 14 Turbo (compare to Hobie Cat® #10822010 black)

Murrays PN 002-0114-21 and 002-0114-22
    White Black
    H-14 TURBO BRIDLE 1/8" WIRE
    Murrays Sports
    $35.00
    H14/16 Rudder Pins Stainless Steel

Murrays Part# 001-2269




Weight-saving, hollow stainless rudder pins for Hobie® 14 or Hobie® 16 with stronger .065" wall provide reduced wear and the best long-term fit. This kit includes one pair of 3/8" x 8" rudder pins with cotter pins.

New One piece rudder gudgeons have been produced with a slightly smaller metric hole size. If you have a 2020 and newer boat or 2020 and newer one piece gudgeons, our aluminum rudder pins may require force to install and be diff
    H-14/16 RUDDER PINS PR (STAINLESS)
    Murrays Sports
    $35.00
    Out of Stock
    MAST STEP LINK KIT H14/16
Hobie part number 21380001
    H-14/16 MAST STEP LINK KIT
    Hobie
    $34.99
    H14/16 Boom End Cap AFT

Murrays Part# 50-10741031




Replacement rear boom end cap for Hobie® 14 or 16. Use two 6-6 rivets (#19-5032) for installation.
Hobie® Part# 10741031
    H14/16 AFT BOOM END CAP
    Hobie
    $34.99
    H14/16/17/18 Gudgeon Lower

Murrays Part# 25-3352

The latest, strongest rudder gudgeon design with welded sleeve bushings provides large, smooth bearing surfaces between rudder pins and gudgeons. Replace flared gudgeons with their sharp edges and point loading that can cause early rudder pin failure. For Hobie® 14, 16 and 17, order separate upper and lower gudgeons. For all other Hobie® cats with new-style castings, post 1986, order 4 for a complete set .

Replacement for Hobie Part# 50101401
    H-14/16/17/18 LOWER GUDGEON
    Murrays Sports
    $34.99
    H14/16/17/18 Line Catcher-Black

Murrays Part# 30-3530



The Hobie Trampoline Line Catcher is a strip of mesh trampoline that fits in between your center trampoline lacing to prevent lines and other items from falling through the lacing. Works on all 3 piece Hobie 14, 16 and 18 trampolines.
    H-14/16/17/18 LINE CATCHER-BLACK
    Murrays Sports
    $32.00
    Tramp Line Kit: H14/16/18

Murrays Part# 001-2242

Tramp Line Kit: Hobie 14, Hobie 16, Hobie 18: low stretch line offers a longer-lasting option over shock cord and is the better choice for sailors who prefer a very tight tramp. As the line stretches slightly over time, sailors can re-tension the tramp lacing to their liking.

The kit contains three lengths of 3/16" 8-strand black low-stretch line (one piece 33', two pieces 15') and lacing instructions.

This kit will lace all factory and most aftermarket t
    H-14/16/18 LOW STRETCH TRAMP LINE KIT
    Murrays Sports
    $31.00
    Hobie Main Sail Headboard w/ rivets
Replacement Hobie factory Hobie Main Sail Headboard w/ rivets.  Hobie part #68330011
    HOBIE ALUMINUM HEADBOARD WITH RIVETS
    Hobie
    $29.99
    RUDDER LOCKING KIT Hobie 16
Murrays Part# 50-10311900
Hobie factory rudder locking kit for Hobie 14 or 16 includes one each plunger, 2-1/2" spring (#50-10432000), and Delrin screw.
Delrin screw is 3/4-10 thread. In many cases you can drill it out with a 5/8" drill bit and then get a 3/4-10 tap to clear the threads.
    H-14/16 RUDDER LOCKING KIT
    Hobie
    $29.99
    H14/16 Aluminum Rudder Pins

Murrays Part# 001-2272




Aluminum rudder pins are standard on Hobie® 14 and 16 and are good for all-around, low maintenance use. Pair of 3/8" x 8" rudder pins with cotter pins.

New One piece rudder gudgeons have been produced with a slightly smaller metric hole size. If you have a 2020 and newer boat or 2020 and newer one piece gudgeons, our aluminum rudder pins may require force to install and be difficult to remove. The stainless pins are a better fit.


Sold in pairs
    H-14/16 ALUMINUM RUDDER PINS
    Murrays Sports
    $29.00
    H14 Mast Spinnaker Tang

Murrays Part# 50-10690000




Hobie® factory replacement spinnaker tang or mast tang for Hobie 14 or Wave. Use six 6-4 rivets (#19-5031) and six 6-4 casings (#19-5020) for installation.
    H-14 MAST SPINNAKER TANG
    Hobie
    $28.99
    H14/16/18 Gooseneck Boom Pin

Murrays Part# 50-10772010



Hobie® factory gooseneck boom pin for Hobie® 14, 16 or 18.
    H-14/16/18 GOOSENECK BOOM PIN
    Hobie
    $28.99
    Tracker Hinge Upright

Murrays Part# 007-1054

The standard replacement hinge upright for the tracker on all Hobie® 14, 16 and newer 17's.
Fits: Hobie Getaway Main Traveler Car

Hobie Cat® Part# 11840100
    TRACKER UPRIGHT HINGE
    Hobie
    $28.99
    Sale
    HOBIE RAIL RUG KIT
    Hobie
    Sale price $28.00 Regular price $95.00 Save $67
    H14 Bridle 1/8"

One bridle for Hobie® 14 constructed of 1/8" 1x19 wire to factory specifications. Compare to Hobie Cat® #10822101.

This is for Hobie 14s without jibs.

Murrays PN 002-0114-01

002-0114-02
    H-14 Bridle 1/8"



Single bridle for Hobie 14 constructed of 1/8" 1x19 wire to factory specifications. 

This is for Hobie 14s without jibs.

Use this page to order product numbers:

02-0114-01 White
02-0114-02 Black

Compare to Hobie Cat® #10822101
    White Black
    H-14 BRIDLE 1/8" WIRE
    Murrays Sports
    $28.00
    DACRON INSIGNIA CLOTH - BLACK
    Murrays Sports
    $25.00
    H14 Masthead Sheave


The Hobie 14 Mast head sheave - Old Style is the large plastic pulley sheave.

Replacement for the sheave in the original all aluminum Hobie 14 mast that has a single large sheave in the mast head.

Hobie 14 pre comptip masthead sheave. Measures 4" x 3/8" with a 3/8" hole.

​Requires a 3/8" x 1.5" clevis pin or bolt to install or the 51-14041713 Mast Head Sheave Pin.

Hobie part number 14041712
    H-14 MASTHEAD SHEAVE
    Hobie
    $25.00
    Hobie 378 Replacement vane for Telo-Cat™ and Black Max is constructed of tough, high-impact plastic vane with visible trim markings.
    TELO-CAT REPLACEMENT VANE
    Davis
    $25.00
    Recently viewed