Hobie 14 Parts

241 products

    Parts to fit your Hobie 14

    241 products
    Out of Stock
    H14 and Wave Comptip Masthead Murrays Part# 50-10602111 This is a replacement masthead for a Hobie 14 or Hobie Wave.
    H-14 AND WAVE COMPTIP MASTHEAD
    Hobie
    Out of Stock
    TRACKER CAR COMPLETE NEW (POST93)
    Hobie
    Out of Stock
    Tracker Car Complete (Pre-1994) Murrays Part# 007-1050 This tracker car is the standard replacement part for all 1993 and earlier Hobie® 14, 16 and 17 main tracker traveler assemblies. Includes 2-3 rivets where required. Hobie Cat® factory item #105.
    TRACKER CAR COMPLETE (PRE'94)
    Hobie
    Out of Stock
    H14/Wave Mast Step Murrays Part# 50-10170011 Mast step for Hobie 14 (without threaded post) and Wave (96 and older). Hobie® factory replacement part. If you have a H14 with threaded post order #50-20200011 (see below). Requires four 6-6 rivets (item #19-5032).
    H-14/WAVE MAST STEP
    Hobie
    Out of Stock
    H14/16 Mast Step-Black Murrays Part# 50-20200011 This is a factory Hobie 14*/16 Mast Step Black replacement. For Hobie 14s and Hobie 16s.  This is the post 2004 version. The first hardware change was in the early 80s. The mast step was angled further back and the mast base was adjusted to match. If you are replacing an original pre-1980 mast step you will need new rigging to accommodate the increased mast rake.
    H-14/16 MAST STEP-BLACK
    Hobie
    Out of Stock
    H14/18/18SX/20/Wave Comp-tip Luff Track 87" Murrays Part# 50-38584001 Hobie factory replacement 87" luff track for Hobie Cats except Hobie 16 and Getaway.  Older H18 comp tips were one long piece of plastic, newer boats have two sections. This plastic piece, and shorter aluminum piece. If you are replacing an older one piece luff track, you will also need to purchase the aluminum top section as well.
    H-14/18/18SX/20/WAVE COMP-TIP LUFF TRACK
    Hobie
    The Murrays Jib Snorkel will protect your roller furling jib from ultraviolet light and weather while on or off the boat.
    MURRAYS JIB SNORKEL
    Murrays Sports
    Tiller Crossbar Adjustable Cap Kit Murrays Part# 50-6040000M Murrays Tiller Crossbar connection kit is a complete kit to connect the Hobie tiller cross bar and tiller arms. This is modeled after the original design but with some upgrades. We use 2 adjustable end caps to extend the overall adjustment length. Allows users shorten their tiller crossbar due to corrosion. 2 adjustable caps also allows users to adjust the crossbar length from either end of the bar. The tiller crossbar
    TILLER CROSSBAR ADJUSTABLE CAP KIT
    Murrays Sports
    H14 Turbo Jib Block Wire Murrays Part# 002-0124-80 Jib block wire for Hobie® 14 Turbo is constructed to factory specifications. Older under tramp version: requires grommets in the trampoline for jib blocks to connect to the Jib block wire thru the trampoline. And also requires a Hobie 14 shroud tang at the base of the shrouds to connect to. Turbo typically refers to the Hobie Factory Version that features a Hobie Roller furling drum, bridles connect to the drum with forks, and an under tram
    H-14 TURBO JIB BLOCK BLACK WIRE
    Murrays Sports
    84" Murrays Fiberglass Tiller Extension Murrays Part# 001-1320 The 84" Murrays Fiberglass Tiller Extension is a lighter version of the Hobie fiberglass tiller extension. It was developed by an A Fleet Racer looking for a lighter more economic alternative. Murrays helped get them into production and here they are! Features: 5/8" diameter black fiberglass tube Hobie yoke base, same as the Hobie version 16" grip on the top 84" fixed length Weight: 3/4 lb.
    MURRAYS 84" FIBERGLASS TILLER EXTENSION
    Murrays Sports
    H14 Line Package Comptip Murrays Part# 001-3914C This is a replacement line package for your Hobie 14 with a comptip.  Line Package Includes:  Main Halyard Comp-Tip Style  Mainsheet 3/8" 42' Downhaul 3/16" VLS 5' Outhaul 3/16" VLS 7.5' Tramp Center Lacing 1/4" 19' Tramp Rear Lacing 1/4" 15' Righting Line 1/2" 16'
    H-14 LINE PACKAGE COMP TIP
    Murrays Sports
    Out of Stock
    POWER RIGHTING SYSTEM WITHOUT POLE
    Murrays Sports
    Tracker: Bottom Roller (Post-1993) Murrays Part# 007-0112 Bottom roller with rivets for the tracker car on 1993 and later Hobie® 14, 16 and 17 's. This part allows you to rebuild your existing Hobie Traveler car by just replacing the track rollers and keeping the top half. This part can be installed on older boats if the matching Deep Track is installed as well. Fits Hobie Getaway Traveler Car. Hobie Cat Part# 112
    TRACKER BOTTOM ROLLER (POST 93)
    Hobie
    Out of Stock
    Tracker: Bottom Roller (Pre-1994) Murrays Part# 007-1060 The standard replacement bottom roller for all 1993 and earlier Hobie® 14 and 16s. Includes two rivets. Hobie Cat® factory item #106.
    TRACKER: BOTTOM ROLLER (PRE 94)
    Hobie
    Harken 40mm Block -Swivel, Becket, Cam Cleat Murrays Part# 28-2646 Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to our popular Harken Big Boat blocks, these small, compact blocks have very high working loads for safe, easy trimming.
    HARKEN 40MM BLOCK- SWIVEL BECKET, CAM CLEAT
    Harken
    HOBIE 14 MAIN HALYARD COMPTIP This main halyard is used to raise the main sail on a Hobie® 14 with CompTip on its mast. Constructed to factory specifications. Compare to Hobie Cat® #10657001.
    H-14 MAIN HALYARD COMPTIP
    Murrays Sports
    H14 Line Package Non-Comptip Murrays Part# 001-3914 Replacement Line package for your classic all aluminum mast Hobie 16.  Line Package Includes: Main Halyard 3/16" 22' Mainsheet 3/8" 42' Downhaul 3/16" VLS 5' Outhaul 3/16" VLS 7.5' Tramp Center Lacing 1/4" 19' Tramp Rear Lacing 1/4" 15' Righting Line 1/2" 16'
    H-14 LINE PACKAGE NON-COMP TIP
    Murrays Sports
    H14/16 Hawaiian Catamaran Righting System Murrays Part# 001-3293 The Hawaiian Catamaran Righting System doubles as a preventer line. Big 1/2" braided righting line is suspended by shock cord under the trampoline. Lines terminate at the transom. Behind-the-back support allows lighter crews to combine weight or solo skippers to have a free hand for scooping up water (as with the Bucket Up Righting Aid) to add leverage. Racing class legal.
    H-14/16 HAWAIIAN RIGHTING
    Murrays Sports
    Hobie Rudder Covers Murrays PN 50-82420000 Rudder covers by Hobie protect your rudders from nicks and grime. Hobie's rudder covers feature straps with Fastex® fasteners to keep the covers firmly in place, even when trailering. The covers fit all Hobies except H21SE (Special Edition). These come as a pair. Hobie part number 82420000
    HOBIE RUDDER COVER
    Hobie
    Hobie 16 spare parts kit, shackle tool, drain plugs, rudder pins, clevis pins and rings, 3/16" bow shackle, 1/4" bow shackle, batten tie strings, and 3 mast bearings. Pouch comes in assorted colors as available. Hobie #30305 and #30306.
    H-14/16 SPARE PARTS KIT:
    Murrays Sports
    Murrays Original Hobie 14 & 16 Jib traveler car for pre 1994 boats with the external track on the front crossbar. 21230000
    MURRAYS H-14/16 JIB TRAVELER CAR
    Murrays Sports
    Out of Stock
    H14 Turbo Upper Forestay with Swivel Murrays Part# 002-0134-01 Upper forestay with swivel for Hobie® 14 Turbo is constructed to factory specifications. Turbo refers to the Hobie Factory Version that features a Hobie Roller furling drum, bridles connect to the drum with forks, and an under tramp jib block wire. Compare to Hobie Cat® #10810010
    H-14 TURBO UPPER FORESTAY WITH SWIVEL
    Murrays Sports
    Sale
    Comp-Tip Cover: H-16/18/20 Murrays Part# 31-2441 Hobie Cat recommends that CompTips on Hobie 16, 17, 18 and 20 be covered to protect them from ultraviolet light. Top quality polyester material is treated for UV-resistance and provides much better and long-lasting protection than nylon covers. Highly visible, red-tip reinforced end. Cover ties to mast with included line.
    H-16/18/20 COMP-TIP COVER
    Murrays Sports
    Save $81
    Aluminum Adjustable tiller extension for Hobie, Nacra and Prindle catamarans. Compare to Hobie 20550001 Hobie hot stick
    Murrays Part# 001-0062 Replacement tiller yoke assembly for all hiking sticks sold by Murrays. Used to connect the tiller extension to the tiller crossbar. Includes two contoured spacers that provide a solid platform for the yoke to sit on. Compare to Hobie Cat® Tiller yoke assembly #3205 or NACRA connection part tiller/joystick #31072 Applications: All Hobies and Prindles Tiller Yoke Assembly: 1
    TELESCPOING TILLER EXTENSION 50"-95"
    Murrays Sports
    H-14 EUROPEAN DOLPHIN STRIKER ROD
    Murrays Sports
    HOBIE 14/16 GOOSENECK ASSEMBLY Murrays PN 50-10770001 Hobie factory replacement gooseneck assembly for Hobie 14 or 16. Hobie Cat item #10770001.
    H-14/16 GOOSENECK ASSEMBLY
    Hobie
    The Murrays Hobie 16 one piece rudder gudgeon is not cast but machined and then anodized for superior strength and longevity. Compare to Hobie 50102011
    The Murrays Hobie 16 one piece rudder gudgeon is not cast but machined and then anodized for superior strength and longevity. Compare to Hobie 50102011
    MURRAYS H-16 ONE PIECE RUDDER GUDGEON
    Murrays Sports
    Harken Swivel with Carbo Cam Bullseye Murrays Part# 25-3010 Swivel cam cleats are ideal for main traveler control and up-release jib cleating systems. Cam cleats and fairleads should be selected on the basis of need. Order plastic base pads and flat head screws separately to mount to your front crossbar.
    HARKEN SWIVEL WITH CARBO CAM & BULLSEYE
    Harken
    STRETCH RIGHTING H14/16/17/18 Murrays Part# 001-3294 The Murrays Stretch Righting Kit is our most popular righting line kit for catamarans such as Hobie® 14, 16, 17, 18 and 18SX. If the bow starts to bury, the line is readily available to both skipper and crew who can anchor themselves to keep from being catapulted forward. This beautifully simple system features easy-to-grip, 1/2" hollow braid line with internal shock cord that stretches for righting or trapezing and then recoils automatically
    H-14/16/17/18 STRETCH RIGHTING
    Murrays Sports
    Out of Stock
    H-14/WAVE EUROPEAN MAST BASE
    Hobie
    Sale
    ​​Murrays Rudder Covers for Hobies The Murrays rudder covers are constructed of durable, UV stable, padded material to protect your rudders from dings, nicks and grime. The red color helps with visibility when trailering. Straps with sturdy buckles keep the covers firmly in place, even when travailing. The Murrays Rudder covers have strong UV resistance and have 2-3 times the lifespan of a Hobie rudder cover. Unit: Pair Made in the U.S.A. Compatibility: Fits all Hobie rudders except the H21SE (Special
    ​​Murrays Rudder Covers for Hobies The Murrays rudder covers are constructed of durable, UV stable, padded material to protect your rudders from dings, nicks and grime. The red color helps with visibility when trailering. Straps with sturdy buckles keep the covers firmly in place, even when travailing. The Murrays Rudder covers have strong UV resistance and have 2-3 times the lifespan of a Hobie rudder cover. Unit: Pair Made in the U.S.A. Compatibility: Fits all Hobie rudders except the H21SE (Special
    MURRAYS HOBIE RUDDER COVER
    Murrays Sports
    Save $24
    The Hobie 16 and 14 Surefoot EVA Deck Grip Kit features 3m peel and stick backing on cut-diamond-textured EVA foam. Ideal rail and or deck grip on all dinghies and catamarans. EVA traction pads offer grip, padding and a long life span.  EVA is a lightweight foam doesn’t absorb water the way carpet does, so it dries quickly! Includes​ four 4" x 40" strips - covers both sidebars. Compare to Hobie Cat® Rail Rug #1671BLK.
    The Hobie 16 and 14 Surefoot EVA Deck Grip Kit features 3m peel and stick backing on cut-diamond-textured EVA foam. Ideal rail and or deck grip on all dinghies and catamarans. EVA traction pads offer grip, padding and a long life span.  EVA is a lightweight foam doesn’t absorb water the way carpet does, so it dries quickly! Includes​ four 4" x 40" strips - covers both sidebars. Compare to Hobie Cat® Rail Rug #1671BLK.
    H14/16 SUREFOOT EVA KIT
    Murrays Sports
    Hobie 14 Trapeze Wires - Hobie Part Number - BLACK 1475B - WHITE 1475W
    H-14 TRAPEZE WIRES (2)
    Murrays Sports
    Out of Stock
    H14/Wave Mast Base Murrays Part# 50-10640011 Hobie® factory replacement black mast base for Hobie® 14 or Wave. Use four 6-6 rivets (#19-5032) for installation.    
    H-14/WAVE MAST BASE
    Hobie
    Telo-Cat Bridle Vane; Murrays Part# 008-1450 Designed especially to take the abuse of catamaran sailing, the Telo-Cat is durable and highly visible. It installs on the headstay bridle in seconds and is easily removed for trailering with no tools required. It comes complete with 8" vane, adjustable tacking arms and mounting hardware to fit most catamarans. The Telo-Cat is made of high-impact plastic with a stainless steel shaft and tacking arms. The vane rides on a super sensitive Teflon® bearing syst
    TELO-CAT BRIDLE VANE
    Davis
    H16 Dolphin Striker Post Murrays Part# 50-20140001 Hobie® factory replacement dolphin striker post fits all Hobie® 16 mast steps (older and newer)
    H-16 DOLPHIN STRIKER POST
    Hobie
    Sale
    BIG DRYER SAIL & BOOM BAG
    Murrays Sports
    Save $20
    HOBIE 14 MAIN HALYARD W/SHACKLE Main halyard with shackle for Hobie 14 with all-aluminum mast (no CompTip) is constructed to factory specifications. A main halyard is used to raise the main sail. Compare to Hobie Cat® #10651001
    H-14 MAIN HALYARD WITH SHACKLE
    Murrays Sports
    104" Hobie batten part number 21000001
    H-16 MAINSAIL FIBERGLASS BATTEN 107"
    Murrays Sports
    H16/18/Getaway Mast Tang Murrays Part# 50-20690000 Hobie® factory replacement mast tang for Hobie® 16, 18, Getaway and the 1995 and newer Hobie® 17. Use twelve 6-4 rivets (#19-5031) and twelve casings (#19-5020) for installation. Also known as a mast hound
    H-16/18/GETAWAY MAST TANG
    Hobie
    Recently viewed