Murrays Marine - Catamaran specialists

All Sailing Parts

3138 products

    Murrays Sports is your best one stop shop for beach catamaran parts and accessories.  We stock both OEM and aftermarket parts for Hobie Cat Catamarans, Nacra Catamarans, and Prindle Catamarans.  We also have parts for Dart, Sol-Cat, G-Cat, Sabot and O'Pen Skiff Sailboats.

    We manufacture many OEM parts for these boats and have a full rigging shop onsite.  We make most of our rigging orders and ship within 24 hours of being ordered.

    Murrays has kits to make your life easier. From Rigging sets, Line Sets, Rudder locking kits, Rudder cam kits, Mast hinge kits, spare parts kits, rudder rebuild kits, cat righting kits, pins and rings kits and more.

    We manufacture many hard to find parts and source parts as needed when the OEM manufacturers discontinue items.

    Murrays has the largest selection of tiller extensions available with aluminum, fiberglass and carbon version s available in fixed length and adjustable length hiking sticks.

    We make 3 generations of Hobie 16 rigging and can help you get what you need for your boat.

    Custom rigging - Murrays can handle custom rigging requests from 3/32, 5/32 and 1/8" wire.  We use top quality 316 stainless wire for the best longevity.  We use professional grade tools and have experienced craftsmen with years of experience handling the rigging.

    Email us lengths, wire type and end pieces for a custom rigging quote.  Send quote requests to info(at)murrays.com.  Use the @ symbol in our email address instead of (at).  If we post the address we get even more spam.

    We offer expert parts advice and can help with any size project from restoring a classic boat to maintaining a fleet of boats.

    We carry a full line of parts from Hobie, Harken, Nacra, Ronstan, Robline, Alpha Rope, Pelican Rope, and Rooster.

    Navigating Murrays.com: The 2 best ways to find the parts you need are to use the Search and the Shop By Boat section.

    The Search is at the top of the page and is for searching key words like Fairlead, 40mm block, cheek block, clew block, downhaul, Nacra Bridle etc. 

    The Shop By Boat section can be found in the dropdown menu. Click on the Pars by Boat menue header and then select your boat under the manufacturer.  Once on your boat you can shop by category: Mast Parts, Rigging, Boom Parts, Front Crossbar Parts, Rudder Parts, Upgrades and Accessories.

    We have hyperlinked Illustrated parts lists for the Hobie 16 and the Hobie Wave on their shop by boat pages.

     

     

    3138 products
    Ronstan Wave Mainsheet Upper Block

Murrays Part# 21-41500

The Hobie Wave Mainsheet Upper Block is a Ronstan Series 40 fiddle block with 40mm sheaves. Series 40 All Purpose Block, Fiddle All purpose fiddle block with universal head
    RONSTAN WAVE MAINSHEET UPPER BLOCK
    Ronstan
    $56.50
    O’Pen Skiff Dolly Wheel

Murrays Part# 65-31761



Replacement Dolly Wheel for the O’Pen skiff Dolly.

Tahe Part# 31761
    O'PEN SKIFF DOLLY WHEEL
    Tahe Outdoors
    $39.95
    Out of Stock
    O’Pen Skiff Boat Cover
    O’Pen Skiff Boat Cover
    MURRAYS OPEN SKIFF BOAT OCVER
    Murrays Sports
    $195.00
    The Ding All Expoxy Quik Stick is a hand-kneadable, special epoxy putty that mixes in just one minute for permanent repairs to damp or wet areas. Dries white in 30 minute cure time. Perfect gear bag item.
    DING ALL EPOXY STIK
    Misc
    $8.80
    GoPro Mount with Fastener for Gath Helmet

Murrays Part# 52-2303

The GoPro Camera Mount gives you the convenience of easy, clip-on/clip-off camera mounting on a Gath helmet. The kit combines the GoPro camera base plate with a Gath customized, rust-proof helmet screw for an easy, do-it-yourself, convenient, top mounting to provide a secure, well-balanced helmet cam. All model GoPro cameras easily clip on or off.
    GOPRO HELMET MOUNT WITH FASTENER
    Gath
    $12.50
    Wave Trapeze Wire BK (2)

The basic trapeze assembly is constructed to factory specifications and includes two coated trapeze wires 3/32" (1x19) with nylon handles and a thimble at each end. Wires end just below handles. Order shock cord and adjustment kits separately.

A trapeze adjustment kit (#01-1121 or 01-1140, purchased separately) may be added to wire with no installation charge! Check box when ordering and wire length will be adjusted accordingly.
    WAVE TRAPEZE BLACK WIRE (2)
    Murrays Sports
    $75.00
    H-16 3-PIECE MESH TRAMPOLINE WITH TEFLON-BLACK
    Murrays Sports
    $545.00
    Out of Stock
    Manera Wing Hook
Murrays part# 54-2058
You think winging doesn’t require a harness, until you get a taste of free flying. Then you want to go upwind as much as possible and enjoy the feeling of gliding downwind effortlessly.
Our WING HOOK will help you do just that. It is adaptable to any wing harness/leash belt that has a 50mm large front strap.
    MANERA WING HOOK
    Manera
    $15.00
    Sunfish Gudgeon Bracket

Murrays Part# 68-91054



The gudgeon bracket bolts to the transom of the SOL or Sunfish, providing a secure mounting point for the rudder head.

Features: 
Made from stainless steel for durability and corrosion resistance
Provides a strong and long-lasting attachment for the rudder
Essential component for proper rudder installation
Built to withstand the elements, ensuring reliable performance on the water.
    SUNFISH GUDGEON BRACKET
    Laser Performance
    $49.00
    Out of Stock
    Sunfish Two Loop Bridle

Murrays Part# 68-91122

This two loop bridle provides a secure attachment point for the aft end of the mainsheet, allowing the boom to swing smoothly and evenly from side to side. Made from stainless steel cable with a protective plastic coating, it features two loops that connect to the eye straps on the deck for a strong and durable setup.

Features: 
2-loop design for balanced boom movement
Stainless steel cable with plastic coating for durability
    SUNFISH TWO LOOP BRIDLE
    Laser Performance
    $15.00
    Out of Stock
    Sunfish Auto Bailer

Murrays Part# 68-91026



The bailer is mounted at the bottom of the cockpit and automatically drains excess water, helping to keep the cockpit dry. It can be easily opened and closed using the rubber cap.

Features:

Fits newer style Sunfish models (1973-present)
13/16″ thread length, which refers to the length of the cap
Designed for efficient drainage and easy operation

A reliable replacement for maintaining proper cockpit drainage.
    SUNFISH AUTO BAILER
    Laser Performance
    $85.00
    Out of Stock
    Sunfish Hiking Strap

Murrays Part# 68-91138

This padded hiking strap is designed for maximum comfort while hiking, fitting both old and new Sunfish models.

Features:

Made by Rooster for quality and durability
Features a unique rubber compound with a high coefficient of friction for better grip
Lightweight and durable construction for long-lasting use
Pro Plus Range includes rubber added to the bottom for enhanced stability

A great choice for sailors looking for improved comfort and control on the
    SUNFISH HIKING STRAP
    Laser Performance
    $57.00
    Out of Stock
    Sunfish Sail Ties

Murrays Part# 68-L61D029

Secure your sail with this durable and lightweight sail ties, made from 2mm Dyneema® SK78 for exceptional strength and minimal stretch.
Designed for easy rigging and a secure hold, this kit is a must-have for Sunfish sailors looking for reliability on the water!
    SUNFISH SAIL TIES
    Laser Performance
    $17.00
    Out of Stock
    Hobie Tiller End Cap

Murrays Part# 50-10560000


Replacement end cap for Hobie tillers.
    HOBIE TILLER END CAP
    Hobie
    $2.39
    Ridengine Nug
Murrays part# 54-5521
The Ridengine Nug is a universal wing harness sliding hook that can be mounted on virtually all wing harnesses available today.
Simple, easy to use wingsurf harness line hook that is adaptable to any webbing waist leash or webbing slider harness.
    RIDE ENGINE NUG
    Ride Engine
    $19.98
    Out of Stock
    Hobie Getaway Mast Step

Murrays Part# 50-37170001



Mast step assembly for the Hobie Getaway. Attaches to the front cross bar.

Hobie Part# 37170001
    HOBIE GETAWAY MAST STEP STUD
    Hobie
    $34.99
    Trimstar Control Line 3mm Black
    TRIMSTAR CONTROL LINE 3MM
    AlphaRope
    $0.30
    Torx Tool L T30

Murrays Part# 001-7001

This is a basic Stainless steel Torx Tool, T30 is the size. Standard size for F-One foil hardware and a number of other foil screws using the M6 screws. This tool is small and fits in a pocket or spare bits pouch well.
    TORX TOOL L T30
    Misc
    $10.00
    Ronstan S-Hook, 8mm (5/16")

Murrays Part# 21-0049



The Ronstan 8mm S-Hook features a closed eye and long return leg to ensure a positive attachment and avoid accidental release.

316 Stainless Steel, 8mm diameter bar

Ronstan Part# RF49
    RONSTAN S HOOK, 8MM (5/16")
    Ronstan
    $11.00
    Full size kite pump with smooth pumping action for quick easy kite inflation. 2 way pumping action with a switch to change it to one way. Compatible with most kites on the market, includes 6 inflation adapters.
    MYSTIC KITE PUMP EXTREME-BIG PUMP
    Mystic
    $69.99
    Sale
    The Mystic Ambush Mid + Front Deck Pad is a front foot deck traction pad for kite surfboards and features their Gecko Grip texture for maximum grip with a low profile. It works on all type and sizes of boards. The 6 piece front foot deckpad has holes in the center to allow for footstraps if desired. The Ambush deck pad has 3m peel and stick adhesive in it for easy installation and a secure adhesion.
    MYSTIC AMBUSH MID AND FRONT DECK PAD-BLACK
    Mystic
    Sale price $44.00 Regular price $54.99 Save $10.99
    Out of Stock
    Hobie Getaway Jib-Bora Bora

Murrays Part# 50-379920781

Description:

Bora Bora / Chartreuse colorway Jib for the Hobie Getaway made from 6 oz Dacron. Compatible with any Hobie Getaway sailboat.

6 oz heavy duty Dacron sail cloth for long term durability.
Standard on all new Hobie Getaway sailboats starting in 2021.

Hobie Part# 379920781
    GETAWAY JIB (BORA BORA)
    Hobie
    $504.99
    6" TWIST-N-SEAL HATCH
    Hobie
    $67.99
    F-ONE TITAN MAST FOOT
Murrays Part# 54-5110
The TITAN mast foot is the connecting part that makes the F-ONE aluminum masts compatible with all TITAN fuselages and wings. It is made of superior-grade aluminum 6061, CNC machined with high precision and fully anodized. To install the TITAN mast foot, it should be inserted into the bottom end of the aluminum mast and fastened with two M6x25mm tapered head screws.
    F-ONE TITAN MAST FOOT
    F-One
    $169.00
    Sale
    F-ONE Carbon Flow Fin Set-M

Murrays Part# 54-5102

The F-ONE surf fins have been developed to optimize the efficiency of our shapes.

Their outline, stiffness, and profile were designed specifically for surfing with a kite, which means different requirements than for prone surfing.

The FLOW series was developed for versatility and high performances over a wide range of conditions. Using the RTM construction paired with a carbon strip, the FINS FLOW CARBON generate more speed and deliver controlled flex
    F-ONE CARBON FLOW FIN SET-M
    F-One
    Sale price $69.00 Regular price $119.00 Save $50
    D-Cup 78 KMIX 8mm Black/Grey
Murrays Part# 39-4208bg
Double braid. 12 strand, coated Dyneema® Sk78 core, 24 plait mix HT Polyester / Cordura® cover.
    D-CUP 78 KMIX 8MM
    AlphaRope
    $2.20
    Sale
    Dakine Fly Wing Adjustable Line
Murrays part# 32-348800
The Dakine Fly Wing Adjustable Line is an adjustable line for winging. With a non-corrosive adjustable buckle and non-slip boom pads, this product is simple yet effective.
Attachment points open all the way up so they are easy to install on all wings.
Easy to install on wings with frim handles, webbing handles and booms.
Ideal on firm handles and booms because of the wide attachment point so it wont tear the handle grip.
Features:
Non-corrosive
    DAKINE FLY WING ADJUSTABLE LINE
    Dakine
    Sale price $29.00 Regular price $45.00 Save $16
    H-16 1-PIECE BIAS CUT MESH TRAMPOLINE-BLACK
    Murrays Sports
    $450.00
    Stop Sleeve 3/32"
Murrays Part# 002-1031
A stop sleeve grips a single wire to provide a "stop" for halyard hooks or trapeze handle, etc. A special "J" size opening on a nicropress tool is required for closing 3/32" and 1/8" stops; 5/32" stop requires "M" opening.
Use this page to order item numbers 02-1031 3/32", 02-1041 1/8", 02-1051 5/32" and 02-1061 3/16" stop sleeves.
    STOP SLEEVE 3/32"
    Misc
    $1.20
    Washer 5/16 x 3/4 Flat SS

Murrays Part# 50-8080671

EZ Loc Rudder Assembly Lower Bolt Washer for Hobie Bravo, Getaway and Wave

Hobie Part# 8080671
    WASHER STAINLESS STEEL 5/16 x 3/4" FLAT
    Hobie
    $0.29
    TIGER BRIDLE 5/32"
    Murrays Sports
    $75.00
    Ronstan Series 15 BB Block - Single Swivel Head

Murrays Part# 21-15100



The Series 15 BB Block - Single Swivel Head is the smallest and lightest ball bearing block available. It features a precision molded acetal sheave running on stainless steel ball bearings which provide high performance and low friction. Single loop head blocks include an O-ring to separate running line from head lashing or fixing.
    RONSTAN SERIES 15BB BLOCK-SINGLE SWIVEL HEAD
    Ronstan
    $23.99
    Screw 12-24 x 3/4 RHMS-P Stainless Steel
Murrays Part# 50-8030170
Hobie Part# 8030170
    SCREW 12-24 x 3/4 RHMS-P SS
    Hobie
    $0.79
    Ronstan S19 C-Track Composite
Slide, Loop Top, Plunger Stop

Murrays Part# 21-91940



Suitable for dinghy and small catamaran jib sheet leads and dinghy outhauls.

Features:
Spring-loaded plunger stops allow fast, positive positioning of track slides
Slides are available with swiveling cleat and fairlead to suit different crewing positions
Applications:
Dinghy and small catamaran jib sheet leads
Dinghy outhauls
    RONSTAN SERIES 19 C-TRACK COMPOSITE SLIDE, LOOP TOP, PLUNGER STOP
    Ronstan
    $32.53
    Dyneema Scissors

Murrays Part# 21-RFSCISSORS



These Dyneema Scissors easily cut thru tuff materials like Dyneema and Kevlar and are essential to anyone's repair kit if they work with Dyneema or Kevlar. Ideal for people who are splicing dyneema or spectra line for sailboat rigging or kiteboarding line sets.
    DYNEEMA SCISSORS
    Misc
    $75.99
    Nacra Boom U-Bracket

Murrays Part# 56-31063



The U-bracket which is on the gooseneck, this part is used to connect the boom to the mast.
    NACRA BOOM U-BRACKET
    NACRA
    $22.00
    Out of Stock
    Rivet Semi 3/16x27/32 Stainless Steal

Murrays Part# 50-8012062
    RIVET SEMI
    Hobie
    $0.99
    Out of Stock
    NACRA RUDDER COVER
    NACRA
    $95.00
    RBS Tensioner Key Tool

Murrays Part# 46-0001



RBS Tensioner Key Tool is a convenient tool for adjusting RBS batten tensioners.
    RBS TENSIONER KEY TOOL
    RBS
    $3.50
    Recently viewed