Murrays Marine - Catamaran specialists

All

3148 products

    All Murrays Products: Hobie, Nacra, Prindle rigging, rudder parts, sails, trampolines, spare parts, lines and more. 

    3148 products
    Getaway Comptip Murrays Part# 50-37611100 Hobie Getaway CompTip factory replacement CompTip for Getaway is a special order item. A CompTip is the upper section of a Hobie mast built in and after 1986. Fiberglass and non-conductive, it was designed to prevent electrocution by contact with a high power line.
    HOBIE GETAWAY COMPTIP
    Hobie
    N5.5SL, N5.7 Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-4305-12 Single black shroud for Nacra 5.5SL and 5.7 is hydraulically swaged to be clean and strong. Constructed to factory specifications.
    N-5.5SL/5.7 SHROUD 5/32" BLACK WIRE ROLLER SWAGED
    Murrays Sports
    H14 3-Piece Mesh Trampoline-Black Murrays Part# 30-3101 This aftermarket 3-piece tramp for Hobie® 14 is not made by Hobie Cat, so it is not legal for Hobie® class racing. Black polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won't be sitting in a puddle. Grommets for Turbo jib block wires are included. Hobie Part# 10970055
    H-14 3-PIECE MESH TRAMPOLINE-BLACK
    Murrays Sports
    N-5.7 BRIDLE 5/32 BLACK WIRE
    Murrays Sports
    Ronstan Furler Drum 2.5 Fork/Fork
    Ronstan
    Out of Stock
    H17 Gooseneck Murrays Part# 50-50406231 Hobie® factory replacement gooseneck for Hobie® 17.
    H-17 GOOSENECK
    Hobie
    Harken 57mm Carbo Ratchamatic 7:1 Low-Profile Mainsheet System Murrays Part# 28-71 The Harken 7:1 Mainsheet System includes a 57mm Triple Carbo Ratchamatic Base with 40mm Carbo single (Harken #HSB360) added on to it and a 57mm Triple with becket boom block (Harken #2605) By adding the 40mm Carbo single to the base block we have turned this into a low profile 7:1 Mainsheet system. line is not included. Safe working load is 1500 pounds; breaking strength is 3750 pounds.
    HARKEN 57MM CARBO RATCHAMATIC 7:1 LOW-PROFILE MAINSHEET SYSTEM
    Harken
    Nicopress Oval 1/8" Copper/Zinc
    NICOPRESS OVAL 1/8" COP/ZNC
    Misc
    H16 E-Clip Gooseneck Murrays Part# 50-8062521 Hobie® factory replacement E-clip for gooseneck on Hobie® 16. The E-clip fits old-style boom pin that is grooved. Hobie Part# 8062521
    H-16 E-CLIP GOOSENECK
    Hobie
    Tear-Aid A Roll (3"x30') Murrays part# 010-3310-1 Tear-Aid Type A is the best-known kite and sail repair tape and it works on all kite canopy / sail materials: Dacron, mylar and ripstop nylon and kite bladders. Each package includes one foot of clear repair tape, alcohol pad and instructions. To use, clean area to be repaired with alcohol, cut patch to size, then peel and stick.
    TEAR-AID A ROLL (3"x30')
    Tear-Aid
    Ronstan Toggle Pin With Lanyard 1/4x1.25" Murrays Part# 21-1159L ​Stainless steel 1/4" diameter toggle pin replaces 1.25" clevis pin. Secure quick connect/disconnect clevis pin with a lanyard so you loose it.
    RONSTAN TOGGLE PIN WITH LANYARD 1/4X1.25"
    Murrays Sports
    Ronstan Toggle Pin With Lanyard 1/4 X 1" Murrays Part# 21-1157L ​Stainless steel 1/4" diameter toggle pin replaces 1" clevis pin. Secure quick connect/disconnect clevis pin with a lanyard so you loose it.
    RONSTAN TOGGLE PIN WITH LANYARD 1/4X1"
    Murrays Sports
    Out of Stock
    Sunfish Rudder Cheek Assembly Murrays Part# 68-85126 This plastic rudder head securely attaches to the rudder blade, forming a complete rudder assembly. Features: Includes pintle pin for secure mounting Tension springs are NOT included Durable plastic construction for reliable performance This rudder cheek is Sunfish Class Legal
    Sunfish Rudder Cheek Assembly Murrays Part# 68-85126 This plastic rudder head securely attaches to the rudder blade, forming a complete rudder assembly. Features: Includes pintle pin for secure mounting Tension springs are NOT included Durable plastic construction for reliable performance This rudder cheek is Sunfish Class Legal
    SUNFISH RUDDER CHEEK ASSEMBLY
    Laser Performance
    Dakine Connect Kite Spreader Bar 10"
    DAKINE CONNECT KITE SPREADER BAR
    Dakine
    104" Hobie batten part number 21000001
    H-16 MAINSAIL FIBERGLASS BATTEN 97.5"
    Murrays Sports
    Sale
    Mystic Short Kite Safety Leash Murrays part# 57-1637030 The Mystic Short Kite Safety Leash features a push away quick release and a carabiner style attachment clip. Short leashes are recommended for all kiters who do not ride unhooked. Features 45cm length (unstretched) Soft touch, lightweight material Compact carabiner Mystic 2.0 compact quick release Neoprene carabiner cover Designed for freeride / wave performance Minimum length, maximum reach
    MYSTIC SHORT KITE SAFETY LEASH
    Mystic
    Save $9.99
    WIRE 3/32" 1X19 WHITE COATED
    Misc
    SPLIT CABLE COVER 5/32"
    Davis
    Right Rudder Casting Murrays Part# 56-4005 ​Right rudder casting for all Prindles does not include hardware. Nacra Sailing factory item# 30413
    PRINDLE RIGHT RUDDER CASTING
    Murrays Sports
    Out of Stock
    NACRA MAST HEAD SHEAVE - 30185
    NACRA MAST HEAD SHEAVE
    Murrays Sports
    Sale
    Naish Hero Kiteboard Murrays Part# 54-7525 The 2020 NAISH HERO 140×43 40CM is designed to take riders from their first reaches and beyond in this user-friendly freeride board. The Hero is not easily outgrown—nor is it only for beginners—the high flex Hero provides a smooth, forgiving ride and on-demand control that even the most experienced kiters love.
    NAISH HERO KITEBOARD 140cm
    Naish
    Save $340
    Fanatic Skywing Footstrap Murrays Part# 54-1041 The Fanatic Skywing Footstrap is an adjustable footstrap for the Skywing and foiling SUPs. Includes: 2 self-tapping screws and anti twist plates. Specs: 11.5″ long x 2′ wide x 1′ thick Sold individually
    FANATIC SKYWING FOOTSTRAP WITH HARDWARE
    Fanatic
    TORQEEDO SPARE PARTS KIT TRAVEL Set for Torqeedo Travel models. Comprises emergency magnetic stop key attachment pin (long) for battery and attachment pin (short) for steering.
    TORQEEDO SPARE PARTS KIT TRAVEL
    Torqeedo
    Featuring a molded body with a replaceable stainless steel blade. The opposed slopes at the back of the blade reduces friction resistance which enables a smooth and more effective cut. The opposed slopes at the back of the blade reduces friction resistance which enables a smooth and more effective cut. Featuring a molded body with a replaceable stainless steel blade.
    ROOSTER SAFETY KNIFE
    Rooster
    Out of Stock
    H21 Super Cruiser Rudder Pin Murrays part# 50-30740001 H21/SC Hobie Rudder Pin for the Hobie 21 and the Hobie 21 Sport Cruiser. Hobie part# 30740001
    H-21SC RUDDER PIN
    Murrays Sports
    Rooster Cap Leash Murrays Part# 48-129031 The Rooster Cap Leash features a durable webbing leash with zero corrosion fixtures at each end. The damage free secure grip will ensure that you never loose your hat again.
    ROOSTER CAP LEASH
    Rooster
    Nacra Hammock Hook Murrays Part# 56-1034 Hammock hook (sideloader) for Nacra 5.2, 5.5, 5.8, 6.0 and 18SQ Nacra Sailing factory item# 30013
    NACRA HAMMOCK HOOK
    NACRA
    Nacra Tapered 1:10 Mainsheet Murrays Part# 56-50022 This mainsheet 1:10 F20 (blue) has a Dcup kmix basics, made by Alpha Ropes. The construction of the line is double braid, 12 strand coated, Dyneema® Sk78 core, 24 plait mix with a HT Polyester / Cordura cover. This all round line, is ready to splice of taper and excellent for sheets, halyards and control lines.
    NACRA TAPERED MAINSHEET 1:10
    NACRA
    O'PEN SKIFF BLADE BAG
    Tahe Outdoors
    The Mystic Waist Wingleash was designed for those who want to attach their wing leash to their harness or waistbelt. The Waist Wingleash provides a secure connection to your wing, the waist attachment is ideal for those who prefer more freedom of movement when paddling to and from shore.
    MYSTIC WAIST WING LEASH
    Mystic
    O’Pen Skiff Daggerboard Retaining Loop Murrays Part# 65-533322 Elastic loop + plastic hook to keep the fin in place What O’Pen says about the Skiff: For fun, recreation, perfection and racing! The O’pen BIC sailing dinghy is a breath of fresh air for junior sailing. Based on a modern skiff concept, the O’Pen BIC is very fast, very simple, and very FUN to sail! The self-bailing open transom hull is rapid and responsive, with a modern rig that’s rugged and versatile.
    O'PEN SKIFF DAGGERBOARD RETAINING LOOP
    Tahe Outdoors
    O’Pen Skiff Dolly Wheel Murrays Part# 65-31761 Replacement Dolly Wheel for the O’Pen skiff Dolly. Tahe Part# 31761
    O'PEN SKIFF DOLLY WHEEL
    Tahe Outdoors
    O’Pen Skiff Boat Cover
    O’Pen Skiff Boat Cover
    MURRAYS OPEN SKIFF BOAT OCVER
    Murrays Sports
    Out of Stock
    NACRA 12' SNUFFER END POLE BAG
    NACRA
    Ride Engine Downwind Dry Waist Bag Murrays Part# 54-5536 Cellphone, key fob, credit card, or anything that you want to keep dry and safe on your person the Ride Engine waterproof pouch is the perfect solution for sessions to downwind runs on a SUP, Kite or wingsurf.
    RIDE ENGINE DOWNWIND DRY WAIST BAG
    Ride Engine
    H17 Wing Trampoline Murrays part# 30-3104-3 The Murrays Hobie 17 Wing Trampoline is a pair of aftermarket trampolines for Hobie 17 wings, they are not class-legal for Hobie class racing. Made with polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won’t be sitting in a puddle. Includes both right and left wing trampolines. These tramps can be laced on vs the stock style of sleeved on
    H-17 WING TRAMPOLINE LACE ON
    Murrays Sports
    Out of Stock
    Mast Over Rotator Murrays Part# 56-9866 This is the big wish bone rotator that goes out in front of the mast. Most have been removed or retrofitted, but we have a couple left if you're hunting for one! Nacra part# 9866
    NACRA MAST OVER ROTATOR
    NACRA
    GoPro Mount with Fastener for Gath Helmet Murrays Part# 52-2303 The GoPro Camera Mount gives you the convenience of easy, clip-on/clip-off camera mounting on a Gath helmet. The kit combines the GoPro camera base plate with a Gath customized, rust-proof helmet screw for an easy, do-it-yourself, convenient, top mounting to provide a secure, well-balanced helmet cam. All model GoPro cameras easily clip on or off.
    GOPRO HELMET MOUNT WITH FASTENER
    Gath
    Out of Stock
    TRIMSTAR 2.5MM
    AlphaRope
    NACRA F18 INF DIAMOND WIRE
    Murrays Sports
    Recently viewed