Murrays Marine - Catamaran specialists

All

3148 products

    All Murrays Products: Hobie, Nacra, Prindle rigging, rudder parts, sails, trampolines, spare parts, lines and more. 

    3148 products
    2mm Orion 500 Line Murrays Part# 39-2302BK Robline's 2mm Orion 500 Line is a 16-plait polyester cover and its 8-plait core provide for good grip and make the rope easy to splice. The ideal choice for all cruising enthusiasts. Features Versatile, easily handled and easily spliced polyester double braid is ideal for use as control lines, lashing and dozens of other uses aboard. Best Use: Control lines, tie downs and general lashing Construction: Double braid Cover Fiber/Construction: 16-plait
    ROBLINE 2mm ORION 500 CONTROL LINE
    Robline
    H-16 1-PIECE BIAS CUT MESH TRAMPOLINE-BLACK
    Murrays Sports
    Harken 8mm Bow Shackle Murrays Part# 28-2117 The Harken 8mm Bow Shackle is a forged stainless steel shackle that is polished to a high luster and stamped with the screw pin diameter. Bow shackles are best for multidirectional loads. Their large interior opening allows plenty of articulation especially when attached to a round bail.
    HARKEN 8MM BOW SHACKLE
    Harken
    Stop Sleeve 3/32" Murrays Part# 002-1031 A stop sleeve grips a single wire to provide a "stop" for halyard hooks or trapeze handle, etc. A special "J" size opening on a nicropress tool is required for closing 3/32" and 1/8" stops; 5/32" stop requires "M" opening. Use this page to order item numbers 02-1031 3/32", 02-1041 1/8", 02-1051 5/32" and 02-1061 3/16" stop sleeves.
    STOP SLEEVE 3/32"
    Misc
    West Systems G/ Flex Thickened Epoxy Murrays Part# 40-6558 West Systems G/ Flex Thickened Epoxy is two 4 oz tubes. One of the 4 oz tubes is Resin, and the other 4 oz tube is Hardener. The Thickened Epoxy quickly builds up thickness and will not run or sag. It permanently bonds fiberglass, ceramics, metals and plastics. It adheres tenaciously to difficult-to-bond woods including resinous woods and even wet wood.
    WEST SYSTEMS G/FLEX THICKENED EPOXY
    West Marine
    Washer 5/16 x 3/4 Flat SS Murrays Part# 50-8080671 EZ Loc Rudder Assembly Lower Bolt Washer for Hobie Bravo, Getaway and Wave Hobie Part# 8080671
    WASHER STAINLESS STEEL 5/16 x 3/4" FLAT
    Hobie
    WASHER STAINLESS STEEL 1/4 x 1/2 x .032"
    Hobie
    TIGER BRIDLE 5/32"
    Murrays Sports
    Ronstan Series 15 BB Block - Single Swivel Head Murrays Part# 21-15100 The Series 15 BB Block - Single Swivel Head is the smallest and lightest ball bearing block available. It features a precision molded acetal sheave running on stainless steel ball bearings which provide high performance and low friction. Single loop head blocks include an O-ring to separate running line from head lashing or fixing.
    RONSTAN SERIES 15BB BLOCK-SINGLE SWIVEL HEAD
    Ronstan
    Ronstan S19 C-Track Composite Slide, Loop Top, Plunger Stop Murrays Part# 21-91940 Suitable for dinghy and small catamaran jib sheet leads and dinghy outhauls. Features: Spring-loaded plunger stops allow fast, positive positioning of track slides Slides are available with swiveling cleat and fairlead to suit different crewing positions Applications: Dinghy and small catamaran jib sheet leads Dinghy outhauls
    RONSTAN SERIES 19 C-TRACK COMPOSITE SLIDE, LOOP TOP, PLUNGER STOP
    Ronstan
    ORION SAFETY WHISTLE (2 PACK)
    Misc
    O'Pen Skiff Tiller End Plug Murrays Part# 65-31697 This part commonly fails in the rudder housing and fractures out of the assembly, causing the rudder to be very sloppy or fall of the boat. The earlier boats used rivets, latter boats used screws and nuts. This pack of ten is great for a fleet. If you have a fleet and are struggling with these issues, consider the Solid Murrays Tiller End Plug upgrade.
    O'PEN SKIFF TILLER END PLUG (10PK)
    Tahe Outdoors
    O'Pen Skiff Rudder Mount Top Murrays Part# 65-53270 Upper stainless steel needle Tahe Part# 53270
    O'PEN SKIFF RUDDER MOUNT TOP
    Tahe Outdoors
    O'Pen Skiff Boom Fork Murrays Part# 65-31328 Front fork for the O'pen boom Tahe Part# 31328
    O'PEN SKIFF BOOM FORK
    Tahe Outdoors
    Nacra Tiller Crossbar End Fitting Murrays Part# 56-30116 This part inserts into the end of a NACRA tiller X-bar.
    NACRA TILLER CROSSBAR END FITTING
    Murrays Sports
    Dyneema Scissors Murrays Part# 21-RFSCISSORS These Dyneema Scissors easily cut thru tuff materials like Dyneema and Kevlar and are essential to anyone's repair kit if they work with Dyneema or Kevlar. Ideal for people who are splicing dyneema or spectra line for sailboat rigging or kiteboarding line sets.
    DYNEEMA SCISSORS
    Misc
    Out of Stock
    Dakine Push Button Wind Spreader Bar Murrays Part# 32-368505 Size: 10" Best fits M and L harnesses Color: Black The Dakine Push Button Windsurf Spreader Bar comes with a metal push button system for increased durability and a new asymmetrical webbing attachment bracket that better positions the spreader for less upward rotation. Compatible with all Dakine harnesses. Universal design will work with most any harness brand, year and style.
    DAKINE 10" PUSH BUTTON WIND SPREADER BAR
    Dakine
    Save $29
    Out of Stock
    Rivet Semi 3/16x27/32 Stainless Steal Murrays Part# 50-8012062
    RIVET SEMI
    Hobie
    H16 Masthead Sheave Spacer Murrays Part# 50-20614231 H16 Masthead Sheave Spacer. This is a replacement bearing surface for the comptip masthead sheaves in H16 mastheads. Fits Hobie Getaway Masthead Sheaves Hobie Part# 20644231
    H-16 MASTHEAD SHEAVE SPACER
    Hobie
    Out of Stock
    NACRA RUDDER COVER
    NACRA
    H18 Traveler Angle Deck Plate Murrays Part# 50-61870000 Deck plate for Hobie 18 traveler from Hobie Cat. Hobie Part# 61870000
    Hobie 18 main traveler car parts list - 6180001, 8040301, 61870000, 61880000, 60190000, 8050311, 61842000, 8060121, 61810000, 61830000, 61852000, 8020431
    H-18 TRAVELER ANGLE DECK PLATE
    Hobie
    Out of Stock
    Hobie Wave Trampoline Tension Strap Murrays Part# 50-38970061 Replacement strap for tensioning the Hobie Wave trampoline. Each boat requires four straps.
    WAVE TRAMPOLINE TENSION STRAP
    Hobie
    Out of Stock
    Torqeedo Tiller-Throttle for 503, 1003 Hobie Part# 71-1143-21 Torqeedo replacement complete assembly tiller/throttle/GPS dashboard display (battery, range, speed, input power) can be used remotely with cable extension #71-1921 or #71-1922. Tiller TXX3 is Torqeedo item #000-00218
    TORQEEDO TILLER THROTTLE FOR 503, 1003
    Torqeedo
    Out of Stock
    TORQEEDO SPARE PROPELLER HIGH-SPEED 2.0/4.0 FOR CRUISE
    Torqeedo
    Ronstan Toggle Pin with Lanyard 1/4 X 3/4" Murrays Part# 21-1153L Stainless steel 1/4" diameter toggle pin replaces 3/4" clevis pin. Secure quick connect/disconnect clevis pin with a lanyard so you loose it.
    RONSTAN TOGGLE PIN WITH LANYARD 1/4 X 3/4"
    Ronstan
    Nacra Spinnaker Pole Rear End Cap Murrays Part# 56-9625 Use to attach spinnaker pole to boat. Outside diameter of cap is approximately 1-5/16". Fits: Nacra 460, Nacra 500, Nacra 570, Nacra 16, NACRA 17, Nacra F18 Infusion, Nacra F20 Carbon FCS Nacra Sailing factory item# 30775
    NACRA SPINNAKER POLE REAR END CAP
    NACRA
    Snuffer Pole Pin Bracket Murrays Part# 56-9626 Use this bracket to attach spinnaker pole (discontinued item #56-9622) to boat. Nacra Sailing factory item# 30293
    NACRA SNUFFER POLE PIN BRACKET
    NACRA
    Screw Socket Head 5/16-24 x 2" Murrays Part# 50-8031821 Hobie® factory replacement 5/16-24 x 2" socket head stud. Used in Hobie 18SX wing mounting kit. Hobie Part# 8031821
    SOCKET HEAD SCREW 5/16-24x2"
    Hobie
    The Sheaveless Ronstan Shock Block 10mm The obvious choice for those kitesurfers, paragliders, control line deflections and purchase systems that require a lightweight high load capacity block.
    RONSTAN 10MM SHOCK BLOCK 3/8"-RED
    Ronstan
    Out of Stock
    H16 Rudder Casting Cam Pin 1/4" Murrays Part# 50-10470000 Hobie® factory replacement flare cam pin for Hobie® 16 rudder casting is 1/4" diameter. Flaring this pin can be difficult, so Murrays recommends using #01-2051 sister screws in place of this stock pin.
    H-16 RUDDER CAST CAM PIN 1/4"
    Hobie
    Out of Stock
    H18 Rudder Cam Pin Murrays Part# 50-50312301 Hobie® factory replacement rudder cam pin for Hobie 17, 18, 20, 21SC and 21SE as well as older Wave and Getaway models.
    H-18 RUDDER CAM PIN
    Hobie
    Prindle Rudder Arm Slotted P15/16/18 Murrays Part# 56-5004 22.5" Anodized slotted rudder arm fits all Prindle 15, 16 and 18 Nacra Sailing factory item #30430
    PRINDLE SLOTTED RUDDER ARM
    NACRA
    Roller Furler Darby Ring (Large) Murrays Part# 50-8062511 Hobie® factory replacement large darby ring for roller furler. Hobie Part# 8062511
    ROLLER FURLER DARBY RING (LARGE)
    Hobie
    PRINDLE 18.2/19 OWNERS MANUAL
    Murrays Sports
    Nacra Pivmatic Assembly with Pin: Aluminum Cleat Murrays Part# 56-0266-1 Positive, reliable and easy to install. Nacra rudders automatically kick up on contact with submerged objects with this rudder release fitting. This upgraded Pivmatic assembly has a heavy-duty aluminum cleat that is not as susceptible to wear and stripping as plastic. Complete kit for one side as shown.
    NACRA PIVMATIC ASSEMLY WITH PIN: ALUMINUM CLEAT
    NACRA
    Nacra Inter 20 Tiller Arm Murrays Part# 56-4583 Tiller arm for the Inter 20. Nacra Part# 30124
    NACRA INTER 20 TILLER ARM
    NACRA
    Mirazyme Odor Eliminator 2 oz Murrays Part# 38-1904 Great for cleaning odors out of wetsuits.
    MIRAZYME ODER ELIMINATOR
    Gear Aid
    Carbon Mast Head Murrays Part# 56-6602CAR Nacra mast head for a carbon mast. Nacra Part# 6602Car
    NACRA CARBON MAST HEAD
    NACRA
    H17 Mast Base Washer Murrays Part# 50-52411001 Replacement washer for Hobie 17 mast base assembly. Hobie Part# 52411001
    H-17 MAST BASE WASHER
    Hobie
    H14/16 Illustrated Parts List Murrays Part# 50-87162810 Hobie® factory publication aids in identifying parts for the Hobie® 14 and 16. Find the item number for the part you need and easily search the Murrays store. The parts list is also available for free download at the Hobie Cat® Web site.
    H-14/16 ILLUSTRATED PARTS LIST
    Murrays Sports
    Recently viewed