Murrays Marine - Catamaran specialists

All Sailing Parts

3138 products

    Murrays Sports is your best one stop shop for beach catamaran parts and accessories.  We stock both OEM and aftermarket parts for Hobie Cat Catamarans, Nacra Catamarans, and Prindle Catamarans.  We also have parts for Dart, Sol-Cat, G-Cat, Sabot and O'Pen Skiff Sailboats.

    We manufacture many OEM parts for these boats and have a full rigging shop onsite.  We make most of our rigging orders and ship within 24 hours of being ordered.

    Murrays has kits to make your life easier. From Rigging sets, Line Sets, Rudder locking kits, Rudder cam kits, Mast hinge kits, spare parts kits, rudder rebuild kits, cat righting kits, pins and rings kits and more.

    We manufacture many hard to find parts and source parts as needed when the OEM manufacturers discontinue items.

    Murrays has the largest selection of tiller extensions available with aluminum, fiberglass and carbon version s available in fixed length and adjustable length hiking sticks.

    We make 3 generations of Hobie 16 rigging and can help you get what you need for your boat.

    Custom rigging - Murrays can handle custom rigging requests from 3/32, 5/32 and 1/8" wire.  We use top quality 316 stainless wire for the best longevity.  We use professional grade tools and have experienced craftsmen with years of experience handling the rigging.

    Email us lengths, wire type and end pieces for a custom rigging quote.  Send quote requests to info(at)murrays.com.  Use the @ symbol in our email address instead of (at).  If we post the address we get even more spam.

    We offer expert parts advice and can help with any size project from restoring a classic boat to maintaining a fleet of boats.

    We carry a full line of parts from Hobie, Harken, Nacra, Ronstan, Robline, Alpha Rope, Pelican Rope, and Rooster.

    Navigating Murrays.com: The 2 best ways to find the parts you need are to use the Search and the Shop By Boat section.

    The Search is at the top of the page and is for searching key words like Fairlead, 40mm block, cheek block, clew block, downhaul, Nacra Bridle etc. 

    The Shop By Boat section can be found in the dropdown menu. Click on the Pars by Boat menue header and then select your boat under the manufacturer.  Once on your boat you can shop by category: Mast Parts, Rigging, Boom Parts, Front Crossbar Parts, Rudder Parts, Upgrades and Accessories.

    We have hyperlinked Illustrated parts lists for the Hobie 16 and the Hobie Wave on their shop by boat pages.

     

     

    3138 products
    Hobie Halyard Twist Shackle

Murrays Part# 50-60670000

Classic 3/16 inch stainless steel twist shackle from Hobie Cat.

Hobie Part# 60670000
    HOBIE HALYARD TWIST SHACKLE
    Hobie
    $45.99
    NACRA Trapeze Block

Replacement part for the adjustable trapeze system found on modern NACRA catamarans.

NACRA Part # 30692

Applications:

Nacra 460, Nacra 500, Nacra 570, Nacra 16, NACRA 17, Nacra F18 Infusion, Nacra F20 Carbon, Nacra F20 Carbon FCS
    NACRA Trapeze Block

Replacement part for the adjustable trapeze system found on modern NACRA catamarans.

NACRA Part # 30692

Applications:

Nacra 460, Nacra 500, Nacra 570, Nacra 16, NACRA 17, Nacra F18 Infusion, Nacra F20 Carbon, Nacra F20 Carbon FCS
    NACRA TRAPEZE BLOCK
    NACRA
    $65.00
    The Harken 2149 40mm T2 tie-on block eliminates the need for shackles, posts, swivels, etc. It is ultra-lightweight and sized like a bullet-block.
    HARKEN 40MM T2 SOFT-ATTACH BLOCK
    Harken
    $44.33
    West System Plastic Boat Repair Kit with G/Flex

Murrays Part# 40-6508



West System Plastic Boat Repair Kit G/Flex repairs plastic canoes, kayaks and inflatables made from HDPE, LDPE, ABS, PVC or polycarbonate plastic with the contents of this West System kit. The Plastic Boat Repair Kit features plastic-friendly G/flex 655 epoxy, and is assembled with the do-it-yourselfer in mind.
    WEST SYSTEM PLASTIC BOAT REPAIR KIT WITH G/FLEX
    West Marine
    $48.55
    H18 Traveler Angle Deck Plate

Murrays Part# 50-61870000

Deck plate for Hobie 18 traveler from Hobie Cat.

Hobie Part# 61870000
    Hobie 18 main traveler car parts list - 6180001, 8040301, 61870000, 61880000, 60190000, 8050311, 61842000, 8060121, 61810000, 61830000, 61852000, 8020431
    H-18 TRAVELER ANGLE DECK PLATE
    Hobie
    $40.99
    Out of Stock
    Hobie Wave Trampoline Tension Strap

Murrays Part# 50-38970061



Replacement strap for tensioning the Hobie Wave trampoline. Each boat requires four straps.
    WAVE TRAMPOLINE TENSION STRAP
    Hobie
    $19.99
    Out of Stock
    Torqeedo Tiller-Throttle for 503, 1003

Hobie Part# 71-1143-21



Torqeedo replacement complete assembly tiller/throttle/GPS dashboard display (battery, range, speed, input power) can be used remotely with cable extension #71-1921 or #71-1922. Tiller TXX3 is Torqeedo item #000-00218
    TORQEEDO TILLER THROTTLE FOR 503, 1003
    Torqeedo
    $229.00
    Out of Stock
    TORQEEDO SPARE PROPELLER HIGH-SPEED 2.0/4.0 FOR CRUISE
    Torqeedo
    $99.99
    Hobie Getaway Tiller Connector Screw

Murrays Part# 50-40530021


Hobie® factory replacement tiller connector screw for Club Wave.



Hobie Part# 40530021
    GETAWAY TILLER CONNECTOR SCREW
    Hobie
    $19.99
    Ronstan Toggle Pin with Lanyard
1/4 X 3/4"

Murrays Part# 21-1153L

Stainless steel 1/4" diameter toggle pin replaces 3/4" clevis pin. Secure quick connect/disconnect clevis pin with a lanyard so you loose it.
    RONSTAN TOGGLE PIN WITH LANYARD 1/4 X 3/4"
    Ronstan
    $29.00
    Nacra Spinnaker Pole Rear End Cap

Murrays Part# 56-9625



Use to attach spinnaker pole to boat. Outside diameter of cap is approximately 1-5/16". Fits: Nacra 460, Nacra 500, Nacra 570, Nacra 16, NACRA 17, Nacra F18 Infusion, Nacra F20 Carbon FCS

Nacra Sailing factory item# 30775
    NACRA SPINNAKER POLE REAR END CAP
    NACRA
    $22.00
    Snuffer Hoop Mid Pole

Murrays Part# 56-9710

A snuffer funnels the spinnaker into the sock to facilitate launching and retrieval, even while sailing a triangular course. Keeps the tramp clean. This fiberglass Euro mid-pole ring attaches to spinnaker pole to guide the spinnaker in and out of the sock. 1.5"
    NACRA MID POLE SNUFFER HOOP
    NACRA
    $375.00
    Screw THMS 1/4-20 X 1-5/8"

Murrays Part# 50-8030601

Hobie® factory replacement 1/4-20 x 1-5/8" screw.

Hobie Part# 8030601
    SCREW THMS 1/4-20 X 1-5/8"
    Hobie
    $0.79
    Screw 5/16-18 X 2.5" Socket Head

Murrays Part# 50-8032221

Hobie® factory replacement socket head screw bolt is 5/16-18 x 2-1/2". Hobie 17 and 17 Sport front and rear crossbar bolt.

Hobie Part# 8032221
    SCREW 5/16 X 18 X 2.5" SOCKET HEAD
    Hobie
    $3.79
    The Sheaveless Ronstan Shock Block 10mm
The obvious choice for those kitesurfers, paragliders, control line deflections and purchase systems that require a lightweight high load capacity block.
    RONSTAN 10MM SHOCK BLOCK 3/8"-RED
    Ronstan
    $15.10
    Rudder Gudgeon

Murrays Part# 56-1016

Rudder gudgeon for Prindle 15, 16 and 18

Nacra Sailing factory item# 30993
    NACRA RUDDER GUDGEON
    NACRA
    $16.00
    Out of Stock
    H16 Rudder Casting Cam Pin 1/4"

Murrays Part# 50-10470000



Hobie® factory replacement flare cam pin for Hobie® 16 rudder casting is 1/4" diameter. Flaring this pin can be difficult, so Murrays recommends using #01-2051 sister screws in place of this stock pin.
    H-16 RUDDER CAST CAM PIN 1/4"
    Hobie
    $9.99
    Out of Stock
    H18 Rudder Cam Pin

Murrays Part# 50-50312301




Hobie® factory replacement rudder cam pin for Hobie 17, 18, 20, 21SC and 21SE as well as older Wave and Getaway models.
    H-18 RUDDER CAM PIN
    Hobie
    $14.99
    Roller Furler Darby Ring (Large)

Murrays Part# 50-8062511

Hobie® factory replacement large darby ring for roller furler.

Hobie Part# 8062511
    ROLLER FURLER DARBY RING (LARGE)
    Hobie
    $10.99
    Prindle Centerboard Lock Bearing
P18.2  19
Murrays Part# 56-4870
Centerboard lock bearing for Prindle 18.2 & 19 is Nacra Sailing factory item #30429. Approximately 1" diameter x 5/16" high.
    PRINDLE CENTERBOARD LOCK BEARING
    NACRA
    $5.00
    Nacra Pivmatic Assembly with Pin: Aluminum Cleat

Murrays Part# 56-0266-1



Positive, reliable and easy to install. Nacra rudders automatically kick up on contact with submerged objects with this rudder release fitting. This upgraded Pivmatic assembly has a heavy-duty aluminum cleat that is not as susceptible to wear and stripping as plastic. Complete kit for one side as shown.
    NACRA PIVMATIC ASSEMLY WITH PIN: ALUMINUM CLEAT
    NACRA
    $80.00
    Nacra Inter 20 Tiller Arm

Murrays Part# 56-4583



Tiller arm for the Inter 20.

Nacra Part# 30124
    NACRA INTER 20 TILLER ARM
    NACRA
    $60.00
    Harken 38mm Big Bullet Sheave

Murrays Part# 56-6503

The Mast Head Sheave NACRA 4.5, 5.0, 5.2, 5.7 is an upgraded replacement sheave for mast head on Nacra 4.5, 5.0, 5.2 and 5.7 has a Delrin® sheave with Delrin® ball bearings.
    HARKEN 38MM BIG BULLET SHEAVE
    NACRA
    $15.00
    Mast Base Hinge Plate

Murrays Part# 56-6816

Mast base hinge plate for Prindle 18, 18-2 and 19

Performance Sports factory item# 6816
    PRINDLE MAST BASE HINGE PLATE
    NACRA
    $24.00
    H17 Mast Base Washer

Murrays Part# 50-52411001

Replacement washer for Hobie 17 mast base assembly.

Hobie Part# 52411001
    H-17 MAST BASE WASHER
    Hobie
    $10.99
    Hex Bolt5/16 X 4.25"
Murrays Part# 56-F104
Hexcap bolt measures 5/16 x 4-1/4" and is used on the front crossbar (outboard) of Prindle 15/16/Escape and older Nacras. Performance Sports factory item #F104.
    PRINDLE/ESCAPE/NACRA HEX BOLT 5/16 X 4.25"
    NACRA
    $2.00
    HEAVY DUTY HAND RIVET TOOL
    HP
    $109.00
    Out of Stock
    H14 Black Mesh Trampoline 
Murrays Part# 50-10970055
The H14 black mesh trampoline is a trampoline for a Hobie 14. It is heat-welded for easy maintenance and a long life. Mesh allows wind and water to pass through, so you're not sitting in a puddle. Includes halyard pocket. Order lacing separately.
Hobie Part# 10970055
    H-14 BLACK MESH TRAMPOLINE
    Hobie
    $569.00
    DVD: RICK WHITE SAILING SEMINAR SERIES
    Misc
    $99.00
    Daggerboard Hold Down Tiger

50-F99501200

Hobie® factory daggerboard hold down for Tiger.
    TIGER DAGGERBOARD HOLD DOWN
    Hobie
    $15.00
    H18 Compression Sleeve

Murrays Part# 50-61490000



Hobie® factory replacement compression sleeve for mast of Hobie 18.
    H-18 COMPRESSION SLEEVE
    Hobie
    $5.99
    Clevis Pin 5/16 x 2-3/16"


Murrays Part# 56-4586

Uses:

This 5/16" x 2-3/16" clevis pin is for all Inter rudder assemblies.
Mast step pin for Hobie 21SE 21SC 


Nacra sailing factory item# 30427

Same as Hobie Part# 8020611
    CLEVIS PIN 5/16 x 2 3/16"
    NACRA
    $8.00
    Centerboard Lock Screw 10-32X1" FHMS
Murrays Part# 56-F144
#10-32 X 1" FMHS centerboard lock screw for Prindle 18.2 and 19
    PRINDLE CENTERBOARD LOCK SCREW 10-32X1" FHMS
    Misc
    $0.50
    H20 Boom Retainer Clip

Murrays Part# 50-8060151

Hobie® factory replacement boom retainer clip for Hobie 20.

Hobie Part# 8060151
    H-20 BOOM RETAINER CLIP
    Hobie
    $0.79
    H18 Boom Outhaul Car Assembly

Murrays Part# 50-60220001

Hobie® factory replacement outhaul car assembly for Hobie® 18.

Outhaul and shock cord are not included. For outhaul line, order 7' of 3/16" black line #39-2311BK. For outhaul shock cord, order 7' of #39-7491 black 1/4" shock cord.
    H-18 BOOM OUTHAUL CAR ASSEMBLY
    Hobie
    $109.00
    Bolt Hex 5/16-18 X 1"

Murrays Part# 50-8040171

Hobie® factory hex head bolt measures 5/16-18 x 1". Used on #07-1953 Tiller Connector for Hobie® 20.

Hobie Part# 8040171
    BOLT HEX 5/16-18 X 1"
    Hobie
    $1.39
    H17 Assembly Manual

Murrays Part# 50-50450001

Printout of Hobie 17 assembly manual PDF.
    H-17 ASSEMBLY MANUAL
    Murrays Sports
    $3.09
    3M 5200 Adhesive Sealant 3oz

Murrays Part# 40-5203

3M 5200 Marine Adhesive Sealant is the preferred choice for sealing masts. It goes on smoothly, won't sag, and remains workable for up to 4 hours. The seal is extremely strong and retains its strength above and below the waterline. The sealant provides incredible adhesion, yet stays flexible after it's cured. It becomes tack-free in 48 hours; completely cures in 5 to 7 days with no shrinkage. Clean up with kerosene or mineral spirits. 3 oz. tube. White.
    3M 5200 ADHESIVE SEALANT 3OZ
    3M
    $21.99
    TURNBUCKLE BODY TUBULAR
    Misc
    $21.75
    Tracker Hinge Upright

Murrays Part# 007-1054

The standard replacement hinge upright for the tracker on all Hobie® 14, 16 and newer 17's.
Fits: Hobie Getaway Main Traveler Car

Hobie Cat® Part# 11840100
    TRACKER UPRIGHT HINGE
    Hobie
    $28.99
    Recently viewed