Murrays Marine - Catamaran specialists

All

3148 products

    All Murrays Products: Hobie, Nacra, Prindle rigging, rudder parts, sails, trampolines, spare parts, lines and more. 

    3148 products
    HEAVY DUTY HAND RIVET TOOL
    HP
    Out of Stock
    H14 Black Mesh Trampoline Murrays Part# 50-10970055 The H14 black mesh trampoline is a trampoline for a Hobie 14. It is heat-welded for easy maintenance and a long life. Mesh allows wind and water to pass through, so you're not sitting in a puddle. Includes halyard pocket. Order lacing separately. Hobie Part# 10970055
    H-14 BLACK MESH TRAMPOLINE
    Hobie
    Dolphin Striker Casting Murrays Part# 56-2009 Performance Sports factory dolphin striker casting for all Prindle Cats
    Prindle part numbers 2505, 2009 and 2009C
    PRINDLE DOLPHIN STRIKER CASTING
    NACRA
    Daggerboard Hold Down Tiger 50-F99501200 Hobie® factory daggerboard hold down for Tiger.
    TIGER DAGGERBOARD HOLD DOWN
    Hobie
    Clevis Pin 5/16 x 2-3/16" Murrays Part# 56-4586 Uses: This 5/16" x 2-3/16" clevis pin is for all Inter rudder assemblies. Mast step pin for Hobie 21SE 21SC  Nacra sailing factory item# 30427 Same as Hobie Part# 8020611
    CLEVIS PIN 5/16 x 2 3/16"
    NACRA
    H20 Boom Retainer Clip Murrays Part# 50-8060151 Hobie® factory replacement boom retainer clip for Hobie 20. Hobie Part# 8060151
    H-20 BOOM RETAINER CLIP
    Hobie
    Bolt Hex 5/16-18 X 1" Murrays Part# 50-8040171 Hobie® factory hex head bolt measures 5/16-18 x 1". Used on #07-1953 Tiller Connector for Hobie® 20. Hobie Part# 8040171
    BOLT HEX 5/16-18 X 1"
    Hobie
    Beam Strap All N5.0 and 5.7 Murrays Part# 56-3510 Beam strap for front crossbars on all Nacra 5.0 and 5.7 models and rear crossbars on Nacra 5.0, 5.7 and 6.0. Nacra Sailing factory item #30095.
    NACRA 5.0 and 5.7 FRONT BEAM STRAP
    Murrays Sports
    Washer 5/16x3/4" Stainless Steel Murrays Part# 19-4018 Flat stainless steel washer with 5/16" diameter hole.
    WASHER 5/16x3/4" SS
    Misc
    WASHER #8 (WH NYLON) Murrays PN 19-4006WH White nylon washer is used for installation of access ports (hatches).
    WASHER #8 WHITE NYLON
    Misc
    Out of Stock
    TURNBUCKLE BODY TUBULAR
    Misc
    TURNBUCKLE COMPLETE 5/32"
    Misc
    Tracker Hinge Upright Murrays Part# 007-1054 The standard replacement hinge upright for the tracker on all Hobie® 14, 16 and newer 17's. Fits: Hobie Getaway Main Traveler Car Hobie Cat® Part# 11840100
    TRACKER UPRIGHT HINGE
    Hobie
    TRACKER HINGE PIN
    Hobie
    Thimble 3/32" - 1/8" Stainless Steel Stainless Steel Light Duty Wire Rope Thimbles are designed to provide basic reinforcement and protection for wire rope loops in low-load applications. Light-duty thimbles are more compact and are used in situations where the rope is not subjected to extreme tension or heavy stress. Their purpose is to prevent wire rope loops from fraying, deforming, or wearing at the contact point, while maintaining the shape and integrity of the loop. Stainless Steel Light Duty W
    THIMBLE 3/32" - 1/8" (SS)
    Misc
    SHROUD TENSIONER
    SHROUD TENSIONER/DE-TENSIONER
    Misc
    FHSMS #8 X 1 Stainless Steel Murrays Part# 19-1620 Flat head, self-tapping, stainless steel #8 x 1" sheet metal screw. This screw is commonly used to hold the track endcaps on pre 1997 H16 Jib Traveler Tracks and all H18 Jib Traveler Tracks. Can screw into aluminum or fiberglass.
    SCREW FHSMS #8 X 1" (SS)
    Misc
    SAIL "HC" LOGO U-CUT PR BLACK
    Murrays Sports
    RONSTAN OPEN V-CLEAT FOR 3-6MM LINE
    Ronstan
    Ronstan Fairlead for Medium Cam Cleats Murrays Part# 21-5015 Ronstan's front-mounted fairlead is easily fitted to the T-Cleat and C-Cleat. It allows precise cleating and release from any lead angle. Lower entry efforts for off-center cleating. Will not catch lines or clothing. Constructed of tough, abrasion resistant composite material. Weight: .5 oz.
    RONSTAN FAIRLEAD FOR MEDIUM CAM CLEATS
    Ronstan
    Ronstan Ferrule Eye 8mm Clearance Murrays Part# 21-0499 Ronstan's grade 316 grade stainless steel eyestrap has a ferrule that guides line and provides a nice lead from any angle. Weighs 0.1 oz. Measurements: A = 3/8" ferrule eye diameter B = 3/16" width C = 1-1/8" distance between holes center-to-center D = 5/32" hole diameter Ronstan Part# RF499
    RONSTAN EYESTRAP WITH FERRULE EYE
    Ronstan
    Ronstan Fairlead Forged "Loop" 1-7/16 Murrays Part# 21-0134 Grade 316 stainless steel replacement loop for #21-0371 Track Slide. Specifications: A = 9/16" B = 3/16" C = 1-7/16" D = 3/16" Weight 0.2 oz. Hobie Part# 60330040
    RONSTAN FAIRLEAD FORGED "LOOP" 1-7/16
    Ronstan
    Out of Stock
    RONSTAN SMALL "C-CLEAT' CAM, GREY
    Ronstan
    Heavy Duty Swivel with Aluminum Cam Roller Fairlead Murrays Part# 25-3020 Swivel cam cleats are ideal for main traveler control and up-release jib cleating systems. This is a Murrays product that features an Aluminum Harken 150 cam cleat, and HD swivel plate and a HD roller fairlead. The advantage to the roller fairlead is that it can take a larger line diameter, up to 1/2", and handle heavy loads at extreme angles. Making it ideal for larger catamarans and sailors in high wind areas.
    ROLLER FAIRLEAD KIT (SWIVEL)
    Murrays Sports
    Rivet AAP 6-10 (3/16 X 5/8) Murrays Part# 19-5014 A rivet gun is required for installation of this 3/16" x 5/8" aluminum pop rivet
    RIVET AAP 6-10 (3/16 X 5/8)
    Misc
    Rigging Tape 1"X 15' White Murrays Part# 010-3460 Protects against chafing and sharp edges while providing safety for sails, lines and rope ends. This self-bonding tape is waterproof and leaves no sticky residue. 1" x 15 feet.
    RIGGING TAPE 1"X 15' WHITE
    Misc
    Deluxe Quick Release Pin 1/4 X 1 with Lanyard Murrays Part# 18-4M100 This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. Uses: Hobie boom Gooseneck quick connection pin on the 14, 16 and 18. Hobie 18 main clew to outhaul car connection pin. Compare to Hobie Cat #20305 PIN, QR 1/4 X 1 CUP Upgrade for Hobie 8020410 and 8020411 clevis pin
    DELUXE QUICK RELEASE PIN 1/4 X 1" WITH LANYARD
    Misc
    Out of Stock
    Power Righting System I Murrays Part# 13-4101
    POWER RIGHTING SYSTEM I
    Murrays Sports
    Sale
    Prindle 19 Diamond Wire with Turnbuckle Murrays Part# 002-2494-20 Diamond wire with turnbuckle for Prindle 19 is constructed to factory specifications. Prindle part# 9879
    PRINDLE 19 DIAMOND WIRE WITH TURNBUCKLE
    Murrays Sports
    Save $25
    P19 Upper Forestay 5/32" Bare Wire Murrays Part# 002-2435-00 Bare upper forestay for Prindle 19 is constructed to factory specifications.
    PRINDLE 19 UPPER FORESTAY 5/32" BARE WIRE
    Murrays Sports
    Prindle bridle wire
    PRINDLE 19 BRIDLE 5/32 BK
    Murrays Sports
    Prindle 16, P18 Jib Block Wire Murrays Part# 002-2224-00 Jib block wire for Prindle 16 or 18 is constructed to factory specifications. A swaging tool is needed for installation.
    PRINDLE 16/18 JIB BLOCK WIRE
    Murrays Sports
    O-Ring Seal (Center Screw) Murrays Part# 005-0761-02 REBUILDING OXEN BLOCKS Murrays is a complete repair facility for Oxen (aka IFL, Ochsen, Ocean) blocks. Just send us your block and we will rebuild it for an average cost of $60.00 plus parts and shipping. Some individuals have had success repairing their own blocks, but we have had many blocks sent to us in pieces when others have failed.
    OXEN BLOCK O-RING SEAL(CENTER SCREW)
    Oxen
    Nut Nylock 3/8-16" Stainless Steel Murrays Part# 19-2524 Stainless 3/8-16 hex nut with nylock insert will not rust or work loose if properly installed. Used on newer (1994) Hobie 16 pylon bolt. Hobie Part# 8050521
    NUT NYLOCK 3/8-16" (SS)
    Misc
    Nut Nylock #10-32 Stainless Steel Thick Murrays Part# 19-2515 Mainsheet block replacement nut. The stainless hex nut with nylock insert will not rust or work loose if properly installed. Fits Hobie Main Traveler Car. Fits Hobie Tiller Hinge Screw. Fits Hobie Masthead Sheave Screw H16 Hobie Getaway Compare to Hobie Part Number 8050201
    NUT NYLOCK #10-32 (SS) THICK
    Misc
    N-5.0 MAIN HALYARD WITH SHACKLE
    Murrays Sports
    N-5.2 BRIDLE 5/32 BLACK WIRE
    Murrays Sports
    H14/16 Mast Bearing (Pack of 100) Murrays Part# 001-2042 Teflon® mast bearings for Hobie® 14 or 16 are .06" thick and will form to mast base with first use. Package of 100 mast chips.
    H14/16 MAST BEARING (100-PKG)
    Murrays Sports
    The heavy duty 8mm Hydrofoil T-Nuts (Stainless Steel) are rectangular M8 channel inserts/T-Nuts. Designed for use in hydrofoil mast tracks.  Stainless steal inserts are an upgrade to the standard Brass inserts.  Great for salt water environments, they resist corrosion. Compatable with all Liquid Force, Lift, Slingshot, FoilMount (stainless only), etc track systems. Specs: M8 standard metric threads which is standard for all hydrofoil tracks. M8 t-nuts also work in windsurfing mast tracks as well
    STAINLESS STEEL M8 T-NUTS
    Misc
    Nacra Inter 17 Bridle 1/8" Black Wire Murrays Part# 002-5214-12
    NACRA INTER 17 BRIDLE 1/8" BLACK WIRE
    Murrays Sports
    Recently viewed