Murrays Marine - Catamaran specialists

All

3171 products

    All Murrays Products: Hobie, Nacra, Prindle rigging, rudder parts, sails, trampolines, spare parts, lines and more. 

    3171 products
    Out of Stock
    Nacra Spinnaker Tapered Halyard Murrays Part# 56-50011 Spihalyard tapered Nacra F18 Infusion (red/white), , has a SSR basics, made by Alpha Ropes. Looking to the construction of the line, it's single braid, 16 strand (8x2), mix Dyneema® Sk78 / Cordura®. This line is not ready for kinking and is excellent for sheets. A advantage of this line, its soft while kept in your hands. The spihalyard is ready to sail, completed with tapering for less resistance while hosting/dropping.
    NACRA SPINNAKER TAPERED HALYARD
    NACRA
    SK78 Mini Spool 3mm Dyneema Lashing Line The SK78 Mini Spool 3mm- Robline Dyneema good for any small boat kit…. for tying. lashing, lanyards, pigtails etc. Easily spliced with a small Selma Fid or a D Splicing tool. Honeywell International produces a similar line, marketed as Spectra® Identical to Ocean 3000 XG, but on a smaller spool, this rope is made of pure Dyneema SK78 and treated with FSE Robline’s S.Y.I.S. coating technology. Dyneema SK78 has the same high strength of SK75, but with lower creep
    SK78 MINI DYNEEMA SPOOL 3MM
    Robline
    Series 15 BB Block, Single Loop Top Murrays Part# 21-15101 The Series 15 BB Block, Single Loop Top is the smallest and lightest ball bearing block available. With a precision molded acetal sheave running on stainless steel ball bearings that provide high performance low friction. It has a single loop head blocks include an O-ring to separate running line from head lashing or fixing. Applications: Dinghy control lines Vangs, cunninghams and tweakers Shock cord tensioning systems
    RONSTAN SERIES 15BB BLOCK, SINGLE LOOP TOP
    Ronstan
    Ronstan Urethane Universal Joint Murrays Part# 21-3133 Smooth, uniform rotation in all directions and a quick, firm response to steering movements. The RF3133 universal joint with snap-on cover is designed to allow quick fitting and removal of the tiller extension from the fixed base. Includes urethane universal, heat shrink tubing, and two-piece mounting base. Universal Joint: Urethane tiller extension universal joint. Suits 13.5mm (17/32") ID Tube
    RONSTAN URETHANE UNIVERSAL JOINT
    Ronstan
    Rivet Washer Nylon Commonly used on NACRA catamarans to insulate the stainless rivet from aluminum extrusions. Nacra PN 40200
    RIVET WASHER NYLON
    Murrays Sports
    Orion 500 2mm Mini Spool The Orion 500 2mm mini spool is a premium polyester all round line. The product features a 16-plait braided polyester cover combined with polyester yarn. Specifications: Core: polyester Cover: polyester 16 Diameter: 2mm Length: 15m Colors: red, yellow, black
    ORION 500 2MM MINI SPOOL
    Robline
    O'Pen Skiff Drain Plugs Pk (10) Murrays Part# 65-30978 Pack of 10 of drain plugs for all Bic/Tahe Tahe Part# 30978
    O'PEN SKIFF DRAIN PLUGS
    Tahe Outdoors
    Hobie EZ Loc Rudder Linkage Murrays Part# 50-50313201 Replacement rudder linkage for Hobie EZ Loc style rudder assemblies.  Hobie Bravo, Getaway and Wave Hobie Part# 50313201
    HOBIE EZ LOC RUDDER LINKAGE
    Hobie
    H18/21 Jib Protector Balls Murrays Part# 012-0020 Diamond wire spreader balls for the Hobie 18 and 21.  They go on your diamond wire spreaders to protect your jib from rubbing against them.
    H-18/21 JIB PROTECTOR BALLS
    Tren-Tec
    Out of Stock
    NACRA 15/F16/17/F20C BRIDLE CONNECTOR
    NACRA
    GATH HELMET CHIN STRAP WRAP PAD
    GATH HELMET CHIN STRAP WRAP PAD
    GATH HELMET CHIN STRAP PAD
    Gath
    Solid Rivet 1/8 x 5/16" Brass Murrays Part# 19-5004 Solid Rivet 1/8 x 5/16 Brass Used on sail headboards, clew and tack plates. Hobie Part# 8010020
    SOLID RIVET-BRASS
    Misc
    Hobie Drain Plug Screw Murrays Part# 50-8031731 This screw is used to hold the rudder housing in the back of many of the Hobie Beach cats. H14, H16, H17, H18 Hobie Part# 8031731
    HOBIE DRAIN PLUG SCREW
    Hobie
    Tiger Double Trapeze (4 handles) The Murrays Double Trapeze is a set of 4 black or white coated trap wires with 4 handles for double trapezing. A single thimble per pair of handles eliminates clutter at that mast connection. Order shock cord, harness loops and adjustment kits separately. A complete trapeze system requires the following: Harness loop - Can't Miss Ring or Dogbone Trap Shock Cord Trap Adjustment kit Sailing Harness ​Trapeze adjustment kits (#001-1121, 001-1130 or 001-1140, purchased
    N-F18INF DOUBLE TRAPEZE (4)
    Murrays Sports
    Murrays Part# 46-0016 These are also referred to as "Rocket Style" adjusters. These will work with our H20 Race batten set and various other RBS or similar batten styles. Designed to be attached to the sail with a loop or a piece of line.; Fits RBS foam battens and allows the tension to be adjusted with a flat head screw driver. Both the line and webbing styles are shown in the above picture; The loop style are laying on top of the webbing style.
    RBS LOOP STYLE BATTEN TENSIONER 15x7.6MM
    RBS
    Tiller Crossbar Adjustable Cap Kit Murrays Part# 50-60400011M Murrays Tiller Crossbar Adjustable Cap Kit installs in the end of the Hobie tiller crossbar and allows you to adjust the width of the crossbar which controls the angel of the rudders. Hobie discontinued this part and this is a Murrays Replacement part that we have made here in California. Applications: H14, H16, H17, H18, Hobie 18 SX tiller x-bar Tiller Crossbar Adjuster: 1
    HOBIE TILLER CROSSBAR ADJUSTABLE END CAP
    Murrays Sports
    Hobie factory tiller connector insert bearing for Hobie 20 Miracle. Hobie part number 40680001. Murrays.com - in stock
    HOBIE TILLER CONNECTOR INSERT BEARING
    Hobie
    Shock Cord Pliers  Murrays Part# 33-0010 Close stainless cinch rings completely without burring. These shock cord pliers are for all cinch rings up to 1/2". Made of plated, case-hardened steel with a spring grip. Hobie Cat® uses #83104 for this item.
    SHOCK CORD PLIERS
    Misc
    Screw Boom Clamp 10-24 X 1.25 FHMS-S Murrays Part# 50-8031011 Hobie® factory replacement screw for the boom clamp (#50-61711000) on the Hobie 18. #10-24 x 1-1/4" flat head machine stainless screw with Phillips head. Hobie Part# 8031011
    SCREW 10-24x 1-1/4"
    Hobie
    H-16 ROLLER FURLING JIB KIT
    Murrays Sports
    Roller Furling Darby Ring (Small) Murrays Part# 50-8062501 Hobie® factory replacement small Darby ring for roller furler. Hobie Part# 8062501
    ROLLER FURLING DARBY RING (SMALL)
    Hobie
    Rivet AAC 3/16 x 5/8 CSK Murrays Part# 50-8010171 Hobie® factory aluminum 3/16" x 5/8" countersunk rivet requires a rivet tool for installation.
    RIVET AAC 6-10 3/16x5/8 CSK
    Hobie
    Radio Shoulder Harness Murrays Part# 011-0101 The Radio Shoulder Harness conveniently and securely holds a variety of VHF radio sizes. If your radio is not waterproof, add an Aquapac waterproof case for use in and around water. This harness is ideal for rescue services personnel! Ideal for marine environments, PWC, and sailors.
    RADIO SHOULDER HARNESS
    Murrays Sports
    Nacra Mast Ball 1-1/4" Old (Nylon) Murrays Part# 56-C601 This is the smaller, 1-1/4" mast ball for older, pre-1983 Nacra 5.0, 5.2 and 5.8. Hole diameter is 1/2".
    NACRA NYLON MAST BALL 1-1/4" OLD STYLE
    NACRA
    Nacra Illustrated Old Parts List Murrays Part# 56-0300 Performance Sports factory parts list for "older" Nacras, including Nacra 4.5/450, 5.0, 5.2, 5.5SL, 5.7, 5.8NA, 6.0NA, 5.5Uni, 18SQ.
    NACRA ILLUSTRATED OLD PARTS LIST
    Murrays Sports
    H14 Mast Spinnaker Tang Murrays Part# 50-10690000 Hobie® factory replacement spinnaker tang or mast tang for Hobie 14 or Wave. Use six 6-4 rivets (#19-5031) and six 6-4 casings (#19-5020) for installation.
    HOBIE 14/WAVE MAST TANG
    Hobie
    Out of Stock
    H16 Mast Head Sheave Pin  Hobie Part# 50-10630001 This is a hollow rivet for installing the Hobie 16 masthead sheave on an all aluminum mast, large pulley masthead. Requires special tools or creative minded sailor to improvise their own installation method
    H-16 MAST HEAD SHEAVE PIN
    Hobie
    Out of Stock
    H18 Mast Base Casting-Black Murrays Part# 50-60641031 Hobie® factory replacement black mast base casting for Hobie® 18. Use four #19-5032 rivets for installation.
    H-18 MAST BASE CASTING-BLACK
    Hobie
    Jib Track End Stop Murrays Part# 56-1911 1 Jib track end stop. Fits Nacra 5.5SL, 5.7, 5.8, 6.0, as well as Prindle 18-2 and 19.
    PRINDLE/NACRA JIB TRACK END STOP
    NACRA
    Out of Stock
    H-20/WAVE DRAIN PLUG WITH WASHER
    Hobie
    Out of Stock
    H16 Insignia Decal Murrays Part# 50-22330000 Hobie® 16 sail class insignia decal is a Hobie® factory replacement item.
    H-16 INSIGNIA DECAL
    Hobie
    Out of Stock
    Comp-Tip Mast Head H16 Murrays Part# 50-20614001 Hobie® factory replacement mast head with sheaves. Use four #19-5032 6-6 rivets for installation. This is the standard Hobie Part that comes with all comptip masts on Hobie 16s. This CompTip mast head also replaces the obsolete Hobie 16 mast head (no longer available) for all-aluminum mast. The original halyard will work if you move the halyard hook down to the appropriate height. Alternatively, a new comptip halyard #02-0273-60
    H-16 COMP-TIP MAST HEAD
    Hobie
    Out of Stock
    H16 Comp Tip Luff Track Murrays Part# 50-20616001 Hobie® factory replacement 93" luff track for Hobie® 16 with CompTip on mast.
    H-16 COMP-TIP LUFF TRACK
    Hobie
    Clevis Pin 1/4 x .83" Murrays Part# 50-8020391 Hobie® factory clevis pin measures 1/4" diameter x .8285" grip length (shoulder to the split ring hole).
    CLEVIS PIN 1/4 X .83"
    Hobie
    H18SX Bracket Wing Strut Murrays Part# 50-91490010 This is the bracket that the rear support arm of an H18SX wing uses. One is mounted to the wing and one is mounted to the rear hull of an H18SX per wing. Hobie Part# 91490010
    H-18SX BRACKET WING STRUT
    Hobie
    Rear Boom End Cap Murrays Part# 56-7903 Rectangular rear boom end cap casting for Nacra 5.2 and all Prindles. Nacra Sailing factory item# 30205
    NACRA/PRINDLE REAR BOOM END CAP
    NACRA
    Getaway Assembly Manual Murrays Part# 50-37450011 Hobie factory assembly manual for the Getaway.
    GETAWAY ASSEMBLY MANUAL
    Hobie
    303 FABRIC GUARD 16oz
    303 FABRIC GUARD 16oz
    Misc
    Telescoping Paddle 20" to 45" Murrays Part# 001-1303 Compact paddle power made tough for years of hard use. The paddle has a T-Grip handle and extends from 20" to 45". The bright orange blade doubles as a signaling device. Paddles are required by law in many states for small boats and personal watercraft. Hobie Cat® uses item #3091 for this paddle.
    TELESCOPING PADDLE 20" TO 45"
    Davis
    Spare Parts Kit: Nacra Murrays Part# 001-8221 Why lose a weekend of sailing due to a missing part? Stored in a 5" x 12" zippered pouch, this kit contains the most frequently lost and needed items for your Nacra catamaran. Includes shackle tool, two drain plugs with gaskets, aluminum rudder pins, clevis pins and rings kit, 3/16" bow shackle, 1/4" bow shackle and batten tie strings. Pouch comes in assorted colors. Newer Nacras use pintles instead of rudder pins, so the included rudder pins are not
    NACRA SPARE PARTS KIT
    Murrays Sports
    Recently viewed