Murrays Marine - Catamaran specialists

All

3148 products

    All Murrays Products: Hobie, Nacra, Prindle rigging, rudder parts, sails, trampolines, spare parts, lines and more. 

    3148 products
    Screw 10-32 X 1-1/4" PHMSP Murrays Part# 50-8031071
    SCREW 10-32 X 1-1/4" PHMSP
    Hobie
    F-One Foil Track Stopper
    F-ONE RUBBER FOIL TRACKER STOPPER-PAIR
    F-One
    Out of Stock
    Hanger Wing Hook Murrays Part# 32-321130 Add this hook to your 2" webbing waist leash or use it to replace a lost hook from your Dakine harness. The hook lays flat and out of the way as you climb on your board.
    HANGER WING HOOK
    Dakine
    Save $5
    Out of Stock
    HOBIE SAIL AND BOOM BAG STANDARD
    Hobie
    Aussie Jib Halyard Pigtail Murrays PN 002-0284-00R Jib halyard pigtail for the Aussie system on a Hobie 16.  Constructed with 1/8" 7x19 bare wire. Compare to Hobie part number 20810041. This model is built to the 2009 factory spec. ​Often paired with a 28-0186 Harken Fiddle Block.
    H-16 AUSSIE JIB HALYARD PIGTAIL
    Murrays Sports
    The Murrays Prindle Trapeze Wires are a set of 2 black or white coated trap wires with 2 handles for trapezing. Order shock cord, harness loops and adjustment kits separately.
    H17 Trapeze Wires (2) The H17 Trapeze Wires (2) basic trapeze assembly includes two coated trapeze wires 3/32" (1x19) with nylon handles and a thimble at each end. Wires end just below handles. Order with a trapeze adjustment kit (#01-1121 or 01-1140, purchased separately) and it will be added to wire with no installation charge. Compare to Hobie part number 1471B. ​Order shock cord, Can't miss rings/dog bones and adjustment kits separately. Murrays PN 002-0353-01 002-0353-02
    PRINDLE 16 TRAPEZE WIRES (2)
    Murrays Sports
    ROBLINE SMALL SOFT SHACKLE- 6MM SK78
    Robline
    Rivet Washer Nylon Commonly used on NACRA catamarans to insulate the stainless rivet from aluminum extrusions. Nacra PN 40200
    RIVET WASHER NYLON
    Murrays Sports
    Orion 500 2mm Mini Spool The Orion 500 2mm mini spool is a premium polyester all round line. The product features a 16-plait braided polyester cover combined with polyester yarn. Specifications: Core: polyester Cover: polyester 16 Diameter: 2mm Length: 15m Colors: red, yellow, black
    ORION 500 2MM MINI SPOOL
    Robline
    Nacra Footstrap Set With Bolts Murrays Part# 56-31175 This Nacra footstraps can adjust to the size of your foot. The set comes with 2 footstraps, including the necessary bolts and washer to put them on the boat.
    NACRA FOOTSTRAP SET WITH BOLTS
    NACRA
    Solid Rivet 1/8 x 5/16" Brass Murrays Part# 19-5004 Solid Rivet 1/8 x 5/16 Brass Used on sail headboards, clew and tack plates. Hobie Part# 8010020
    SOLID RIVET-BRASS 1/8"
    Misc
    Murrays Part# 46-0016 These are also referred to as "Rocket Style" adjusters. These will work with our H20 Race batten set and various other RBS or similar batten styles. Designed to be attached to the sail with a loop or a piece of line.; Fits RBS foam battens and allows the tension to be adjusted with a flat head screw driver. Both the line and webbing styles are shown in the above picture; The loop style are laying on top of the webbing style.
    RBS LOOP STYLE BATTEN TENSIONER 15x7.6MM
    RBS
    Hobie Wave Bow Spreader Tang Murrays Part# 50-38120041 Replacement tang for Hobie Wave bow spreader. Hobie Part# 38120041
    WAVE BOW SPEADER TANG
    Hobie
    Hobie factory tiller connector insert bearing for Hobie 20 Miracle. Hobie part number 40680001. Murrays.com - in stock
    HOBIE TILLER CONNECTOR INSERT BEARING
    Hobie
    Roller Furling Darby Ring (Small) Murrays Part# 50-8062501 Hobie® factory replacement small Darby ring for roller furler. Hobie Part# 8062501
    ROLLER FURLING DARBY RING (SMALL)
    Hobie
    Rivet AAC 3/16 x 5/8 CSK Murrays Part# 50-8010171 Hobie® factory aluminum 3/16" x 5/8" countersunk rivet requires a rivet tool for installation.
    RIVET AAC 6-10 3/16x5/8 CSK
    Hobie
    Nut Nylock 5/16-18 Low Profile Murrays Part# 50-8050331 Hobie® factory replacement low-profile 5/16-18 nylock nut.  Fits EZ Loc Upper and Lower Rudder Housing Hobie Bravo, Getaway and Wave. Hobie Part# 8050331
    NUT NYLOCK 5/16"-18 LOW PRO
    Hobie
    Tiller Joint- 3" Urethane Rod Murrays Part# 56-4588 The Nacra Tiller Joint - 3" Urethane Rod is for tiller connections on all Inters, the 500, 570, F18 Infusion and more. The part must be drilled to match your application. Compare to Nacra Part# 4588
    NACRA TILLER JOINT- 3" URETHANE ROD
    NACRA
    H14 Mast Spinnaker Tang Murrays Part# 50-10690000 Hobie® factory replacement spinnaker tang or mast tang for Hobie 14 or Wave. Use six 6-4 rivets (#19-5031) and six 6-4 casings (#19-5020) for installation.
    HOBIE 14/WAVE MAST TANG
    Hobie
    Out of Stock
    H14/Wave Mast Base Murrays Part# 50-10640011 Hobie® factory replacement black mast base for Hobie® 14 or Wave. Use four 6-6 rivets (#19-5032) for installation.    
    H-14/WAVE MAST BASE
    Hobie
    Out of Stock
    Jib Traveler Car Plate Only Murrays Part# 50-2524001 Hobie® factory replacement jib traveler car plate. Can be used on port or starboard side of the boat.
    JIB TRAVELER CAR PLATE ONLY
    Hobie
    Out of Stock
    H16 Mesh Trampoline- Turquoise Murrays Part# 50-20970058 Mesh trampoline for the Hobie 16 with a double grommeted center section. Reinforced in high load areas, has super duty grommets and comes complete with line pockets and built in hiking straps. Note that this trampoline requires a longer lacing line than older models. Includes aft lacing strip. Lacing line is sold separately. Heat-welding lasts longer in the sun than trampolines that are stitched at the seams. Mesh allows wind and water t
    H-16 MESH TRAMPOLINE-TURQUOISE
    Hobie
    H18 Dolphin Striker Post Murrays Part# 50-60140001 Replacement dolphin striker post for the Hobie 18 sailboat. Hobie Part# 60140001
    H-18 DOLPHIN STRIKER POST
    Hobie
    DIAMOND WIRE ROLLER
    Misc
    Sale
    Dakine Kite Compression Bag Murrays Part# 32-900675 Key Features for the Dakine Kite Compression Bag -Replaces heavier stock kite bags reducing overall travel bag weight -Shoulder carry strap for beach travel -Lightweight nylon fabric -Four compression webbing straps -Highly visibility location for writing kite size -210D Nylon -Fits up to 12m 3 strut kites, 10m 5 strut kites and 16m single strut kites. -Dimensions: 60 x 25 x 30cm
    DAKINE KITE COMPRESSION BAG
    Dakine
    Save $5
    Clevis Pin 1/4 x .83" Murrays Part# 50-8020391 Hobie® factory clevis pin measures 1/4" diameter x .8285" grip length (shoulder to the split ring hole).
    CLEVIS PIN 1/4 X .83"
    Hobie
    HOBIE 18 CHANNEL RETAINING PLATE HOBIE PART NUMBER 61110000
    H-18 CHANNEL RETAINING PLATE
    Murrays Sports
    H18SX Bracket Wing Strut Murrays Part# 50-91490010 This is the bracket that the rear support arm of an H18SX wing uses. One is mounted to the wing and one is mounted to the rear hull of an H18SX per wing. Hobie Part# 91490010
    H-18SX BRACKET WING STRUT
    Hobie
    Rear Boom End Cap Murrays Part# 56-7903 Rectangular rear boom end cap casting for Nacra 5.2 and all Prindles. Nacra Sailing factory item# 30205
    NACRA/PRINDLE REAR BOOM END CAP
    NACRA
    #4 Handy Spur Grommet Kit - Hobie 2061 trampoline grommet kit
    GROMMET KIT #4 HEAVY DUTY KIT
    Misc
    Windsurf Adjustable Outhaul Kit Murrays Part# 001-9520 Racers and recreational windsurf sailors can adjust outhaul tension "on the fly" for maximum power or speed: Low gear: Loosen outhaul tension to "power-up" to get going, even in light wind. Shift to drive: Tighten outhaul to flatten sail for more speed as you get onto a plane and/or more efficiency when heading upwind. Adjust the outhaul (sail shape) from either side, at any time.
    WINDSURF ADJUSTABLE OUTHAUL KIT
    Murrays Sports
    Out of Stock
    HOBIE TRACKER CAR COMPLETE NEW (POST93)
    Hobie
    Telescoping Paddle 20" to 45" Murrays Part# 001-1303 Compact paddle power made tough for years of hard use. The paddle has a T-Grip handle and extends from 20" to 45". The bright orange blade doubles as a signaling device. Paddles are required by law in many states for small boats and personal watercraft. Hobie Cat® uses item #3091 for this paddle.
    TELESCOPING PADDLE 20" TO 45"
    Davis
    Swivel with Bulls-Eye (No Cleat) Murrays Part# 25-3011 This item includes the swivel with bullseye, but not the cleat. Swivel cam cleats (cleat sold separately) are ideal for main traveler control and up-release jib cleating systems. Order plastic base pads and fasteners separately.
    SWIVEL WITH BULLS-EYE (NO CLEAT)
    Murrays Sports
    Spare Parts Kit: Nacra Murrays Part# 001-8221 Why lose a weekend of sailing due to a missing part? Stored in a 5" x 12" zippered pouch, this kit contains the most frequently lost and needed items for your Nacra catamaran. Includes shackle tool, two drain plugs with gaskets, aluminum rudder pins, clevis pins and rings kit, 3/16" bow shackle, 1/4" bow shackle and batten tie strings. Pouch comes in assorted colors. Newer Nacras use pintles instead of rudder pins, so the included rudder pins are not
    NACRA SPARE PARTS KIT
    Murrays Sports
    Sister Clip Micro  Murrays Part# 004-7730 The stainless steel micro sister clip is a quick connector with no moving parts. The micro sister clip does not have a slot.
    SISTER CLIP MICRO (EA)
    Murrays Sports
    Screw PHMS #10-32 X 1 Stainless Steel Slot Head Murrays Part# 19-2915 Stainless steel, pan head #10-32 x 1" machine screw with slot is used as dolphin striker screw on all Prindles. Replaces Murrays item #56-F112. Also used in some Hobie Applications, compare to 8030111 Hobie Part. Applications: H18/18 SX/16 and Getaway Tiller Hinge Screw: 2
    SCREW PHMS #10-32 X 1" (SS)
    Misc
    Ronstan Swiveling Fork Snap Shackle 72mm Murrays Part# 21-6130 Top quality Ronstan stainless steel swiveling tack shackle with 1/4" clevis pin features heavy duty plunger springs and precision components to ensure dependable service. Body and hasp profiles are designed for easy clearance of lines and fittings when released. High strength-to-weight ratio.
    RONSTAN SWIVELING FORK SNAP SHACKLE 72MM
    Ronstan
    Ring 3/8 X 2" (Nylon) Murrays Part# 27-190570 3/8" nylon ring has an inside diameter of 2 inches.
    RING 3/8 X 2" (NYLON)
    Misc
    Specs: 1/4" diameter x 1" maximum grip length (distance from the shoulder to the locking ball bearings). Uses: Hobie boom Gooseneck quick connection pin on the 14, 16 and 18. Hobie 18 main clew to outhaul car connection pin. Compare to Hobie Cat® Part# 20305 PIN, QR 1/4 X 1 CUP Upgrade for Hobie Part# 8020410 and 8020411 clevis pin
    QUICK RELEASE DELUXE PIN 1/4 X 1"
    Misc
    Recently viewed