Murrays Marine - Catamaran specialists

All

3148 products

    All Murrays Products: Hobie, Nacra, Prindle rigging, rudder parts, sails, trampolines, spare parts, lines and more. 

    3148 products
    Nacra Illustrated Old Parts List Murrays Part# 56-0300 Performance Sports factory parts list for "older" Nacras, including Nacra 4.5/450, 5.0, 5.2, 5.5SL, 5.7, 5.8NA, 6.0NA, 5.5Uni, 18SQ.
    NACRA ILLUSTRATED OLD PARTS LIST
    Murrays Sports
    H18 Mast Base Casting-Black Murrays Part# 50-60641031 Hobie® factory replacement black mast base casting for Hobie® 18. Use four #19-5032 rivets for installation.
    H-18 MAST BASE CASTING-BLACK
    Hobie
    McLube HullKote Speed Polish 16oz Murrays Part# 40-0420 HullKote combines the same very fast world renowned McLube proprietary formulation of the bonded PTFE suspension system with an entirely revolutionary, citrus-based, long-lasting, high gloss polish. The results have been remarkable.
    MCLUBE HULLKOTE SPEED POLISH 16OZ
    McLube
    H18 Thru-Deck Fairlead Murrays Part# 50-60270000 Fairlead Thru-Deck H18 for trapeze shock cord for skipper and crew trapeze lines that go through the lip on the outside of the hull. Center hole on this fairlead is 7/8" diameter and is sleeved with a stainless steel ferrule. Mounting screw holes have a center-to-center measurement of 1-3/8". Hobie® factory replacement part. Hobie Part# 60270000
    H-18 THRU-DECK FAIRLEAD
    Hobie
    Trap Shock Cord Kit: H20 Murrays Part# 001-0131 A trapeze shock cord is an absolute necessity because it keeps the trapeze system in place and ready for hook-up. One hook connects to either the thimble on the trapeze wire or the adjustment line, then runs under the tramp and connects to the other side in the same location. Our shock cord kit comes with one plastic carbine hook installed; the other hook is installed after lacing shock cord through trampoline grommets. Kit includes two lengths of 1/4" shock
    H-20 TRAP SHOCK CORD KIT
    Murrays Sports
    Toggle Strap 12"-24" Murrays Part# 13-1020 Our handy toggle strap secures items with circumferences from 12" to 24". It is constructed of 1/8" shock cord that is secured with a 1-1/8" end stop. Sold individually Compare to Hobie Cat® Part# 370
    TOGGLE STRAP 12" - 24"
    Murrays Sports
    HEAVY DUTY SWIVEL WITH ALUMINUM CAM & BULLSEYE
    Murrays Sports
    Ronstan Stainless Steel D Shackle, 5/32" Pin, Slotted Head Murrays Part# 21-0615 Ronstan stainless D shackle has 5/32" slot head pin. Features: High strength to weight ratio Premium quality, rated Grade 316 stainless steel bodies and pins
    RONSTAN STAINLESS STEEL D SHACKLE, 5/32" PIN, SLOTTED HEAD
    Ronstan
    Screw PHSMS #8 X 2" Stainless Steel Murrays Part# 19-1624 Stainless steel, pan head, self-tapping, #8 x 2" sheet metal screw
    SCREW PHSMS #8 X 2" (SS)
    Misc
    Screw PHMS #10-32 X 5/8" Stainless Steel Murrays Part# 19-2910 Stainless steel, pan Phillips head, #10-32 x 5/8" machine screw.
    SCREW PHMS #10-32 X 5/8 (SS)
    Misc
    Ronstan Fairlead V-Cleat for 3-6mm Line Murrays Part# 21-5101 Ronstan's carbon-composite V-cleats are strong, lightweight and inexpensive, and are a simple solution to cleating lines under moderate loads. This cleat is great for control lines on catamarans and dinghies. A cutaway in base of fairlead cleats can be used as a becket for a 2:1 purchase system. Use with rope diameters of 1/8"-1/4". Measurement between hole centers is 1-7/8" and the cleat weighs only 0.4 oz.
    ROSTAN FAIRLEAD V-CLEAT FOR 3-6MM LINE
    Ronstan
    Ronstan Swiveling Fairlead & Cam Cleat for 3-12mm Rope Murrays Part# 21-0058 Swivel cam cleats are ideal for main traveler control and up-release jib cleating systems. Swivel cleat bases permit easy cleating and releasing from any angle. Dead eyes contain stainless steel liners for low friction and long life. Cleating plates are heavy gauge alloy for stiffness and minimum distortion under load. Cam cleats and fairleads should be selected on the basis of need. Order plastic base pads with fasteners
    RONSTAN LARGE SWIVEL CLEAT WITH FASTRACK
    Ronstan
    Ronstan Small Becket Block Murrays Part# 21-0188 Use this Ronstan single block with becket for 3:1 system for boom vangs or righting aids. 1/4" line capacity. SWL 660 lbs.
    RONSTAN SMALL BECKET BLOCK
    Ronstan
    RIVET SOLID BRASS 6-6 (3/16x3/8") Solid Brass 3/16" x 3/8" rivet is designed to be set with a hammer. Commonly used to secure sail luff plates, clew plates, tack plates and headboards.
    RIVET SOLID BRASS 3/16"
    Misc
    Quick Release Pin 1/4 X 1-1/4 with Lanyard Murrays Part# 18-4M125L
    QUICK RELEASE PIN 1/4 X 1-1/4" WITH LANYARD
    Misc
    Quick Release Deluxe Pin 1/4 X 1.25" Murrays Part# 18-4M125 This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. Also available with a lanyard, see related items below. Uses: This pin is recommended for connection of hiking stick to crossbar on all Hobie, Nacra and Prindle catamarans. Also used on Hobie 18 SX and Hobie Magnum wings. Compare to Hobie part# 20306 PIN, QR 1/4 X 1-1/4 CUP
    QUICK RELEASE DELUXE PIN 1/4 X 1-1/4"
    Misc
    P16 Upper Forestay 1/8" Bare Wire Murrays Part# 002-2234-00 Upper forestay for Prindle 16 is constructed of bare 1/8" wire to factory specifications.
    PRINDLE 16 UPPER FORESTAY 1/8" BARE WIRE
    Murrays Sports
    Oxen blocks are the ultimate high tech, self-holding jib blocks that offer a real advantage over blocks with cleats! Get fast, simple mainsheet (and jibsheet) control: just pull-to-cleat, then pull-to release! Cleat or uncleat your jib or mainsheet every time without looking and from any position. Cleat from any angle or position on the boat, including the wings, even if your sheet passes over something en route. Oxen blocks are easy to install and foolproof to use. Expensive, but the best is rarely cheap!
    OXEN BLOCK WITH PIN
    Oxen
    O-Ring 5" Screw-In Murrays Part# 001-1171OR This is an approximate replacement for Viking Port O-Rings for 5" ports.
    O-RING 5" SCREW-IN
    MISC
    N-5.2 MAIN HALYARD WITH SHACKLE
    Murrays Sports
    Inter 20 Forestay 5/32" Black Wire Murrays Part# 002-5445-12 Forestay for Inter 20 (without roller furling jib) is constructed of 5/32" black-coated wire to factory specifications.
    NACRA INTER 20 FORESTAY 5/32" BLACK WIRE
    Murrays Sports
    Heavy Duty Swivel with Aluminum Cam Roller Fairlead Murrays Part# 25-3020 Swivel cam cleats are ideal for main traveler control and up-release jib cleating systems. This is a Murrays product that features an Aluminum Harken 150 cam cleat, and HD swivel plate and a HD roller fairlead. The advantage to the roller fairlead is that it can take a larger line diameter, up to 1/2", and handle heavy loads at extreme angles. Making it ideal for larger catamarans and sailors in high wind areas.
    HEAVY DUTY SWIVEL WITH ALUMINUM CAM AND ROLLER FAIRLEAD
    Murrays Sports
    Harken 150 Cam-Matic Cleat Rebuild Kit - 1993 and Newer Murrays Part# 28-0150KIT This rebuild kit is the answer when plastic parts on Harken's 150 Cam-Matic® Cleat have worn out or suffered UV damage, and/or when the springs need to be replaced.
    HARKEN 150 CAM-MATIC CLEAT REBUILD KIT-1993 & NEWER
    Harken
    Harken 29mm Block Murrays Part# 28-0348 Harken's low-friction 29mm Carbo AirBlock® is compact, lightweight and extremely strong. A companion to the popular Harken® Black Magic® line, this small, compact block has a very high working load for safe, easy trimming. This pulley is a popular addition to spinnaker systems. Harken #348.
    HARKEN 29MM BLOCK
    Harken
    H20 Jib Halyard with Shackle Murrays Part# 002-0783-50 Jib halyard with shackle for Hobie® 20 is constructed to factory specifications. Compare to Hobie Cat® Part# 41661001
    H-20 JIB HALYARD WITH SHACKLE
    Murrays Sports
    H20 Forestay 5/32" Black Wire with 5/16 Stud Murrays Part# 002-0745-82 Lower forestay with 5/16" stud for Hobie® 20 is constructed to factory specifications.  Compare to Hobie Cat® Part# 40822121
    H-20 FORESTAY 5/32" BLACK WIRE WITH 5/16" STUD
    Murrays Sports
    Port Cat Bag 5" Murrays Part# 001-1178 The Cat Bag provides handy storage inside a deck port! Designed to hang inside 5" access port (#01-4210 or #01-4210BK) on a molded shoulder. Details: 12" deep Comes in one color: red Metal collar - gap in ring for easy installation Cinch bag style
    5" PORT CAT BAG
    Sea Dog
    H18 Angled Luff Batten Caps Murrays Part# 012-4005 No more battens poking through next to the mast. Ten angled Tren Tec luff caps for Hobie® 18 prevent batten splitting and align batten to the angle of the sail, increasing the life of your sail. Glue to the forward end of the batten. Hobie Part# 1563 Sold in packages of 10
    H-18 ANGLED LUFF BATTEN CAPS
    Tren-Tec
    Harken 2156 40mm Pivot 180 Block with Cam
    HARKEN 40MM PIVOTING LEAD BLOCK- CAM-MATIC CLEAT
    Harken
    3M Perfect It Compound Md
    3M PERFECT-IT COMPOUND (MEDIUM)
    3M
    Murrays Hobie Getaway Turquoise Jib Sail - 37992071
    GETAWAY JIB - TURQUOISE
    MISC
    H16 Mistral Jib Sail Murrays Part# 50-209920611 This is an OEM Hobie 16 Jib Sail with the Mistral Pattern. This is class legal for Hobie One Design Racing or colorful recreational fun! Hobie Part# 209920611
    H-16 JIB SAIL (MISTRAL)
    Hobie
    Harken Micro Cam Cleat Spring H423 Murrays Part# 28-0057 The Harken Cam-Matic Spring for H423- Cam spring for discontinued Harken cams #338 and #423.  Harken Part# MS-093
    HARKEN MICRO CAM CLEAT SPRING
    Harken
    P16 Mesh Trampoline-Black Murrays Part# 30-3122 Black mesh tramp for Prindle 16 includes cut-outs for ports. Hiking straps are installed and one pocket is included. Polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won't be sitting in a puddle. Order lacing line separately.
    PRINDLE 16 MESH TRAMPOLINE-BLACK
    Murrays Sports
    WAVE SAIL BAG DELUXE
    Murrays Sports
    Out of Stock
    Eyelet Post H20 Murrays Part# 50-41220001 The Eyelet Post H20 Hobie® factory replacement eyelet post for Hobie® 20 rear crossbar. This item replaces tie button for Inter cats #56-9882. Fits Hobie Getaway Rear Crossbar
    H-20 EYELET POST
    Hobie
    Sale
    Jib track 5/8” used
    Murrays Sports
    Save $15
    Harken 38mm Low-profile Standard Eyestrap Murrays Part# 28-0201 The eyestrap low-profile SS (ST-2013)- Eyestraps are useful accessories. They form light-duty mounting bases for blocks, serve as lash-down points, and can be used for fairleads.
    HARKEN 38MM LOW-PROFILE STANDARD EYE STRAP
    Harken
    CATAMARAN BOAT YARD COVER
    Misc
    Out of Stock
    Hobie 16 Jib Batten Cap Kit The Hobie 16 jib batten cap kit includes 4 jib batten leech caps and 4 batten tie lines. Hobie part number 1531 Hobie 16 jib batten cap part number 21333000
    H-16 JIB BATTEN CAP KIT
    Hobie
    Recently viewed