Murrays Marine - Catamaran specialists

All

3135 products

    All Murrays Products: Hobie, Nacra, Prindle rigging, rudder parts, sails, trampolines, spare parts, lines and more. 

    3135 products
    Out of Stock
    Mast Float Mama Getaway Murrays Part# 007-30119
    MAST FLOAT MAMA GETAWAY
    Hobie
    Key-Ball Can't Miss Connector  Murrays Part# 001-0142 Can't Miss handles are designed to allow the sailor to hook-up without even looking at the trapeze hook. This lightweight, extra-wide hook-up ring has a center-hold handle with molded finger ridges. Double swaged 1/8" (1x19) wire is color-coated with high pressure nylon tubing. Use this pair of connectors with Carbon Key-Hole Buckle (#01-0311), sold separately.
    KEY-BALL CAN'T MISS CONNECTOR
    Murrays Sports
    Inter 20 Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-5405-12 Single black shroud for Inter 20 is hydraulically swaged to be clean and strong. Constructed to factory specifications.
    INTER 20 SHROUD 5/32"BLACK WIRE ROLLER SWAGED
    Murrays Sports
    Heavy Duty Swivel Plate for Cleat and Bullseye Murrays Part# 25-3012 Heavy Duty Swivel Plate for Cleat and Bullseye. The HD swivel is the base plate for many catamaran and dingy sheeting systems. Found on all models of Hobie cats, as well as many Nacra and Prindle catamarans, as well as dingies, larger sailboats and cruising craft. The HD version of our Swivel Plate
    HEAVY DUTY SWIVEL PLATE FOR CLEAT AND BULLSEYE
    Murrays Sports
    Harken Micro Wire Fairlead Murrays Part# 28-0475 Harken's wire fairlead places the fairlead ahead of the cam and holds line at cleat when not in use. Fits Harken 468 and 471 cams. Wire fairleads maintain a low profile while holding the line close to the cleat.
    HARKEN MICRO WIRE FAIRLEAD
    Harken
    Harken 22mm Becket Block Murrays Part# 28-0225 Low-friction Micro blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats of all sizes. Harken ball bearing micro single block with becket has stainless side plates.
    HARKEN 22MM BECKET BLOCK
    Harken
    Harken 40mm Triple Block - Swivel Murrays Part# 28-2640 Low-friction Carbo AirBlocks® are lightweight, strong, reliable and affordable. These small, compact blocks have very high working loads for safe, easy trimming. This is a fantastic block for a performance AND economical H16 mainsheet system top block. Use it with a 57mm base block for 6:1 performance system.
    HARKEN 40MM TRIPLE BLOCK SWIVEL
    Harken
    Harken Micro Cam-Matic Cleat Murrays Part# 28-0468 Harken's Cam-Matic cleat has multiple rows of high-load ball bearings to reduce friction so that cams open easily for snap-down, rather than draw-through cleating. The cam horns and smooth V-shape guide line for easy entry. This allows precise sail control without having to readjust the cleated line.
    HARKEN MICRO CAM-MATIC CLEAT
    Harken
    H20 Jib Halyard with Shackle Murrays Part# 002-0783-50 Jib halyard with shackle for Hobie® 20 is constructed to factory specifications. Compare to Hobie Cat® Part# 41661001
    H-20 JIB HALYARD WITH SHACKLE
    Murrays Sports
    H20 Forestay 5/32" Black Wire with 5/16 Stud Murrays Part# 002-0745-82 Lower forestay with 5/16" stud for Hobie® 20 is constructed to factory specifications.  Compare to Hobie Cat® Part# 40822121
    H-20 FORESTAY 5/32" BLACK WIRE WITH 5/16" STUD
    Murrays Sports
    H17 Sport Jib Halyard with Shackle Murrays Part# 002-0386-00 Jib halyard with shackle for Hobie® 17 Sport is constructed to factory specifications. Compare to Hobie Part# 52661001
    H-17 SPORT JIB HALYARD WITH SHACKLE
    Murrays Sports
    Dolphin Striker Eye Bolt H14 Murrays PN 001-0106 This part is used as part of the Murrays H14 Dolphin Striker Kit. Replacement stainless steel post for #01-2083 dolphin striker for Hobie® 14. 19-2524 nylock nut is needed and not included with this part.
    H-14 DOLPHIN STRIKER EYE BOLT
    Murrays Sports
    Clevis Pin 1/4 x 1-3/4" Murrays Part# 22-9809 Stainless steel clevis pin measures 1/4" diameter x 1-3/4" grip length (shoulder to the split ring hole)
    CLEVIS PIN 1/4 X 1-3/4"
    Misc
    Clamcleat Trapeze & Vang Cleat Murrays Part# 27-0253 The Clamcleat® trapeze and vang cleat allows for 2:1 trapeze adjustment while hooked up. Line rolls easily on large base roller. 1/4" line capacity. Each. Clamcleat version of a Ronstan Part# RF5121
    CLAMCLEAT TRAP & VANG CLEAT
    Clamcleat
    Catamaran Universal Righting System Murrays Part# 001-8292 The Universal Righting System is simple and effective with large, 1/2" diameter, black polypropylene righting line that is light and easy to access and grip, even when wet. The line self-returns under the tramp after use. There are no knots to pre-tie or untie. The shock cord and pulleys provided hold line snug and are external, so they are easy to adjust and service. Fits 8' to 8'6" wide catamarans; ideal for boats with flush-deck trampoline.
    UNIVERSAL RIGHTING SYSTEM
    Murrays Sports
    Bolt Hex Head 1/4-20 X 5" (Stainless Steel) Murrays Part# 19-2226 Stainless steel 1/4-20 x 5" hex head bolt is used for Hobie® 18 mast rotation arm. Use #19-2516 nut. Equivalent to Hobie® Part# 8040111
    BOLT HEX HEAD 1/4-20 X 5" (SS)
    Misc
    Bolt Hex Head 1/4-20 X 2.25 Stainless Steel Murrays Part# 19-2221 Prindle 16/18 and Hobie® rudder bolt. Stainless steel 1/4-20 x 2-1/4" hex head bolt.
    BOLT HEX HEAD 1/4-20 X 2.25" (SS)
    Misc
    Black Max Wind Indicator Murrays Part# 008-1295 Durable windvane made for the abuses of dinghy sailing. Dinghy sailing is more demanding of both sailors and equipment—both can get a beating on the water. The Black Max Dinghy Windvane was built stand by you take the abuse. This compact windvane mounts to the mast or boom to provide constant feedback of apparent wind angle. The needle bearing of the high-impact plastic vane optimizes sensitivity in light air.
    BLACK MAX WIND INDICATOR
    Davis
    Big Cat Catamaran Righting System Murrays Part# 001-8293 The Big Cat Righting System features the extra line needed to bring bigger cats up from turtle position while keeping the deck clear for better footing. The extra length of 1/2" hollow braided line is quickly accessed by unhooking either or both ends of line with carbine hooks. Extra line is neatly suspended just aft of front crossbar and is held in place with shock cord. Blue water tested and proven! The Big Cat Righting System fits Hobie® 20/21, P
    BIG CAT RIGHTING SYSTEM
    Murrays Sports
    H18 Angled Luff Batten Caps Murrays Part# 012-4005 No more battens poking through next to the mast. Ten angled Tren Tec luff caps for Hobie® 18 prevent batten splitting and align batten to the angle of the sail, increasing the life of your sail. Glue to the forward end of the batten. Hobie Part# 1563 Sold in packages of 10
    H-18 ANGLED LUFF BATTEN CAPS
    Tren-Tec
    Harken 2156 40mm Pivot 180 Block with Cam
    HARKEN 40MM PIVOTING LEAD BLOCK- CAM-MATIC CLEAT
    Harken
    HOBIE 16 JIB CLEW BLOCK KIT
    Murrays Sports
    Hobie 16 Main Halyard Non-Comptip is a wire halyard for the all-aluminum mast (non Comp-Tip) Hobie 16 and is used to raise the main sail. Constructed to factory specifications, and includes a 2nd stopper as a reef point stopper. This is the standard halyard for Hobie 16's with an all aluminum mast which were standard before 1986. Hobie part number 20651011
    H16 MAIN HALYARD WITH LINE (NON-COMPTIP)
    Murrays Sports
    This is for use on the classic style Hobie 16 jib halyard system with a short upper forestay and metal pulley up near the mast tang that was standard in the 70s, 80s and early 90s. There are 2 styles of Hobie 16 jib halyard. This wire Hobie 16 jib halyard works with the old style upper and lower forestay and the metal halyard pulley. The 2nd style is the Aussie jib halyard with it's parallel forestay and jib halyard that became stock in the mid 1990s. Compare to Hobie Part# 20661001
    H16 JIB HALYARD WITH LINE
    Murrays Sports
    Wave Forestay Adjuster w/ Toggle Murrays PN 001-2085 The Murrays Wave Forestay Adjuster with Toggle is a must have for speeding up the rigging process on your Hobie Wave. This adjuster includes a toggle pin with lanyard that can't fall off of your bridle assembly. This allows you to easily raise and pin the mast single handed! The toggle is affixed around the center of the adjuster with a slightly longer lanyard to keep it out of the way of your bridle vane or other accessories.
    Wave Forestay Adjuster w/ Toggle Murrays PN 001-2085 The Murrays Wave Forestay Adjuster with Toggle is a must have for speeding up the rigging process on your Hobie Wave. This adjuster includes a toggle pin with lanyard that can't fall off of your bridle assembly. This allows you to easily raise and pin the mast single handed! The toggle is affixed around the center of the adjuster with a slightly longer lanyard to keep it out of the way of your bridle vane or other accessories.
    WAVE FORESTAY ADJUSTER W/ TOGGLE PIN
    Murrays Sports
    Harken Micro Carbo-Cam Cleat Murrays Part# 28-0471 Harken's Cam-Matic cleat has multiple rows of high-load ball bearings to reduce friction so that cams open easily for snap-down, rather than draw-through cleating. The cam horns and smooth V-shape guide line for easy entry. This allows precise sail control without having to readjust the cleated line.
    HARKEN MICRO CARBO-CAM CLEAT
    Harken
    Sail Repair Kit Murrays part# 007-1665 The Sail Repair Kit by Hobie Cat® keeps you prepared for emergency repairs to sails and trampolines. Includes 3 different weights of thread, 3 sizes of needles and an approximately 6" x 6" patch of white sail cloth. Hobie Cat® factory item #1665.
    SAIL REPAIR KIT
    Hobie
    Murrays Hobie 16 Main Batten Set
    H-16 MAINSAIL FIBERGLASS BATTEN SET
    Murrays Sports
    Getaway Wing Trampoline - Black Murrays part# 30-3092 This part is not frequently stocked. Please allow 2-3 weeks to build and ship if not in stock. Black mesh wing trampolines for the Getaway. Also called wing covers. Not made by Hobie, not legal for Hobie class racing. Built in California by sailors for sailors. We use the same mesh that Hobie uses. Requires 2 x 18' lengths of 3/16" line for lacing. We recommend 3/16" VLS Compare to Hobie part# 37971058
    GETAWAY WING TRAMPOLINE - BLACK
    Murrays Sports
    HOBIE GETAWAY RIGGING KIT Complete standing rigging package for the Hobie Getaway.  If you need the swivel above the forestay as well it is linked below with the shackle that attaches it. Kit includes: Main Halyard Forestay 2 x Shrouds (Side Stays) 2 x Bridles Hobie part numbers 37651001, 37790001, 37810021, 37822011
    GETAWAY RIGGING KIT
    Murrays Sports
    Harken 40mm Block -Swivel, Becket, Cam Cleat Murrays Part# 28-2646 Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to our popular Harken Big Boat blocks, these small, compact blocks have very high working loads for safe, easy trimming.
    HARKEN 40MM BLOCK- SWIVEL BECKET, CAM CLEAT
    Harken
    Wave Comp Tip Murrays Part# 50-38582100 Hobie® factory replacement CompTip for Wave. A CompTip is the upper section of a Hobie mast. Fiberglass and non-conductive, it was designed to prevent electrocution by contact with a high power line.
    WAVE COMPTIP
    Hobie
    Hobie 16 turquoise mesh trampoline Hobie 20970058
    WAVE 3-PIECE CLUB TRAMPOLINE WITH TEFLON THREAD-LAKE BLUE
    Murrays Sports
    Out of Stock
    HOBIE 2020 ERA HULL DECAL (RIGHT SIDE)
    Hobie
    Out of Stock
    Hobie 2020 Era Hull Decal (Left Side) Murrays Part# 50-22330041 Peel and stick on Hull Decal for the Port Hull. Hobie part number 22330041, 22330051
    HOBIE 2020 ERA HULL DECAL (LEFT SIDE)
    Hobie
    H14 Masthead Sheave The Hobie 14 Mast head sheave - Old Style is the large plastic pulley sheave. Replacement for the sheave in the original all aluminum Hobie 14 mast that has a single large sheave in the mast head. Hobie 14 pre comptip masthead sheave. Measures 4" x 3/8" with a 3/8" hole. ​Requires a 3/8" x 1.5" clevis pin or bolt to install or the 51-14041713 Mast Head Sheave Pin. Hobie part number 14041712
    H-14 MASTHEAD SHEAVE
    Hobie
    Out of Stock
    Hobie factory replacement long lock screw for EZ Loc rudder system. Specs: 12-24X3/4 long lock PHMS screw Hobie PN 8030411
    EZ LOC LONG SCREW
    Hobie
    Sale
    Clash foam, NBR spine protection and kick-ass black solid and corduroy design. Being safe never looked so good. Designed, developed and approved by our very own Timo Kapl. This maximum protection wake impact vest is made for you to go nuts while gliding in style.
    MYSTIC TK IMPACT VEST
    Mystic
    Save $40.99
    H-17 Shroud 1/8″ The H17 Shroud 1/8″ is a single shroud for Hobie® 17 constructed with 1/8″ wire to factory specifications. Each. Choose from White or Black wire coating. Purchase two to ensure equal lengths. Use this page to order product numbers: 002-0304-01 White with thimble/thimble fittings (compare to Hobie Part Number 20790011) 002-0304-02 Black with thimble/thimble fittings (compare to Hobie Part Number 20792011)
    H-17 SHROUD 1/8" WIRE
    Murrays Sports
    Sale
    FORWARD WIP SUMMER JOHN-WOMAN
    Forward Wip
    Save $105
    Recently viewed