Murrays Marine - Catamaran specialists

All

3135 products

    All Murrays Products: Hobie, Nacra, Prindle rigging, rudder parts, sails, trampolines, spare parts, lines and more. 

    3135 products
    Mast Base Casting Murrays Part# 56-6605 Factory replacement mast base casting for Nacras except those with a carbon mast. Nacra Sailing item# 30177
    NACRA MAST BASE CASTING
    NACRA Austrailia
    McLube HullKote Speed Polish 16oz Murrays Part# 40-0420 HullKote combines the same very fast world renowned McLube proprietary formulation of the bonded PTFE suspension system with an entirely revolutionary, citrus-based, long-lasting, high gloss polish. The results have been remarkable.
    MCLUBE HULLKOTE SPEED POLISH 16OZ
    McLube
    HP-2 HAND RIVETER 3/32-3/16
    HP
    Out of Stock
    HOBIE POCKET PROTECTOR KIT
    Hobie
    Out of Stock
    H16 Mesh Trampoline- Turquoise Murrays Part# 50-20970058 Mesh trampoline for the Hobie 16 with a double grommeted center section. Reinforced in high load areas, has super duty grommets and comes complete with line pockets and built in hiking straps. Note that this trampoline requires a longer lacing line than older models. Includes aft lacing strip. Lacing line is sold separately. Heat-welding lasts longer in the sun than trampolines that are stitched at the seams. Mesh allows wind and water t
    H-16 MESH TRAMPOLINE-TURQUOISE
    Hobie
    HIKING STRAP WEBBING 2" BLACK
    Misc
    H18 Thru-Deck Fairlead Murrays Part# 50-60270000 Fairlead Thru-Deck H18 for trapeze shock cord for skipper and crew trapeze lines that go through the lip on the outside of the hull. Center hole on this fairlead is 7/8" diameter and is sleeved with a stainless steel ferrule. Mounting screw holes have a center-to-center measurement of 1-3/8". Hobie® factory replacement part. Hobie Part# 60270000
    H-18 THRU-DECK FAIRLEAD
    Hobie
    Hobie Wave Jib Spreader End Cap Murrays Part# 50-38950011 This is part of the Wave bow spreader kit. These go into the ends of the spreader pole. Replacement end cap for Hobie Wave jib spreader assembly. Sold individually Hobie Part# 38950011
    WAVE JIB SPREADER END CAP
    Hobie
    H18 Dolphin Striker Post Murrays Part# 50-60140001 Replacement dolphin striker post for the Hobie 18 sailboat. Hobie Part# 60140001
    H-18 DOLPHIN STRIKER POST
    Hobie
    DIAMOND WIRE ROLLER
    Misc
    HOBIE 18 CHANNEL RETAINING PLATE HOBIE PART NUMBER 61110000
    H-18 CHANNEL RETAINING PLATE
    Murrays Sports
    Out of Stock
    HOBIE TRACKER CAR COMPLETE NEW (POST93)
    Hobie
    Toggle Strap 12"-24" Murrays Part# 13-1020 Our handy toggle strap secures items with circumferences from 12" to 24". It is constructed of 1/8" shock cord that is secured with a 1-1/8" end stop. Sold individually Compare to Hobie Cat® Part# 370
    TOGGLE STRAP 12" - 24"
    Murrays Sports
    HEAVY DUTY SWIVEL WITH ALUMINUM CAM & BULLSEYE
    Murrays Sports
    Stand Up Spring Conical Medium Murrays Part# 21-0320 This medium conical stand-up spring is used for Oxen blocks, OK car, etc.
    STAND UP SPRING CONICAL MEDIUM
    Murrays Sports
    Mini Bullet Block Murrays Part 23-0911 As used in the Murrays No-Cut EZ-Up Trap Ring Return Kit. Mini bullet block has 1-3/16" sheave, Teflon® bearing and 5/16" line capacity. Hobie Cat® uses #3103 for this block.
    MINI BULLET BLOCK
    Ronstan
    Sister Clip Micro  Murrays Part# 004-7730 The stainless steel micro sister clip is a quick connector with no moving parts. The micro sister clip does not have a slot.
    SISTER CLIP MICRO (EA)
    Murrays Sports
    Ronstan Stainless Steel Twisted D Shackle, 1/4" Pin, Coined Head Murrays Part# 21-0629 Ronstan's twisted D shackle is constructed of 316 stainless steel and has a 1/4" pin. PL breaking load is 3090 lb.; UDL breaking load is 5070 lb. Weighs 1.1 oz.
    RONSTAN STAINLESS STEEL TWISTED D SHACKLE, 1/4" PIN, COINED HEAD
    Ronstan
    Screw PHMS #10-32 X 1 Stainless Steel Slot Head Murrays Part# 19-2915 Stainless steel, pan head #10-32 x 1" machine screw with slot is used as dolphin striker screw on all Prindles. Replaces Murrays item #56-F112. Also used in some Hobie Applications, compare to 8030111 Hobie Part. Applications: H18/18 SX/16 and Getaway Tiller Hinge Screw: 2
    SCREW PHMS #10-32 X 1" (SS)
    Misc
    Ronstan Fairlead V-Cleat for 3-6mm Line Murrays Part# 21-5101 Ronstan's carbon-composite V-cleats are strong, lightweight and inexpensive, and are a simple solution to cleating lines under moderate loads. This cleat is great for control lines on catamarans and dinghies. A cutaway in base of fairlead cleats can be used as a becket for a 2:1 purchase system. Use with rope diameters of 1/8"-1/4". Measurement between hole centers is 1-7/8" and the cleat weighs only 0.4 oz.
    ROSTAN FAIRLEAD V-CLEAT FOR 3-6MM LINE
    Ronstan
    Ronstan Swiveling Fairlead & Cam Cleat for 3-12mm Rope Murrays Part# 21-0058 Swivel cam cleats are ideal for main traveler control and up-release jib cleating systems. Swivel cleat bases permit easy cleating and releasing from any angle. Dead eyes contain stainless steel liners for low friction and long life. Cleating plates are heavy gauge alloy for stiffness and minimum distortion under load. Cam cleats and fairleads should be selected on the basis of need. Order plastic base pads with fasteners
    RONSTAN LARGE SWIVEL CLEAT WITH FASTRACK
    Ronstan
    Ronstan Swiveling Fork Snap Shackle 72mm Murrays Part# 21-6130 Top quality Ronstan stainless steel swiveling tack shackle with 1/4" clevis pin features heavy duty plunger springs and precision components to ensure dependable service. Body and hasp profiles are designed for easy clearance of lines and fittings when released. High strength-to-weight ratio.
    RONSTAN SWIVELING FORK SNAP SHACKLE 72MM
    Ronstan
    Ronstan Multi-Purpose Tool Murrays Part# 21-1320 The Ronstan Multi-Purpose Tool is a screwdriver with two shackle sockets and wrench for #8, 10 and 1/4" nuts as well as metric nuts. The 3/4"- thick plastic body provides better grip than flat stainless tools. Suits both coined and slotted shackle pins, and small nylon-insert nuts
    RONSTAN MULTI-PURPOSE TOOL
    Ronstan
    Ronstan Medium "C-Cleat" Cam Murrays Part# 21-5010 Lightweight and durable with quick response and easy entry/exit effort. Outstanding grip, corrosion resistant (no aluminum cams). Fast Track Fairlead option permits widest range of cleating angles without need for rotation. Saves complexity, weight and cost for barberhauler control cleats. 1/8" to 1/2" line; SWL 400 lbs.
    RONSTAN MEDIUM "C-CLEAT" CAM
    Ronstan
    RIVET SOLID BRASS 6-6 (3/16x3/8") Solid Brass 3/16" x 3/8" rivet is designed to be set with a hammer. Commonly used to secure sail luff plates, clew plates, tack plates and headboards.
    RIVET SOLID BRASS 6-6 (3/16x3/8")
    Misc
    Ring 3/8 X 2" (Nylon) Murrays Part# 27-190570 3/8" nylon ring has an inside diameter of 2 inches.
    RING 3/8 X 2" (NYLON)
    Misc
    Out of Stock
    Quick Release Pin 1/4 X 1-1/4 with Lanyard Murrays Part# 18-4M125L
    QUICK RELEASE PIN 1/4 X 1-1/4" WITH LANYARD
    Misc
    Quick-Release Convenience Package: H16 Murrays Part# 001-3231 This package makes set-up and take-down of your Hobie 16® more convenient. Kit includes: One #18-4R125 Quick Release Pin for hiking stick to crossbar connection. One #18-3M075L Quick Release Pin with Lanyard for mainsheet block to traveler car connection. One #21-1032 Quick Twist Halyard Shackle for jibsheet blocks to jib clew boom to mast connection. One #21-1155L Toggle Pin with Lanyard for forestay to adjuster connection. Four #01-0127 Car
    H-16 QUICK RELEASE CONVENIENCE PACKAGE
    Murrays Sports
    Prindle 19 Forestay 5/32" Black Wire with Turnbuckle Murrays Part# 002-2445-42 Forestay with turnbuckle for Prindle 19 is constructed to factory specifications.
    PRINDLE 19 FORESTAY 5/32"BLACK WIRE WITH TURNBUCKLE
    Murrays Sports
    Prindle 18 Forestay 5/32" Black with Turnbuckle Murrays Part# 002-2345-42 Forestay with turnbuckle for Prindle 18 is constructed to factory specifications.
    PRINDLE 18 FORESTAY 5/32" BLACK WIRE WITH TURNBUCKLE
    Murrays Sports
    Out of Stock
    GETAWAY JIB SNORKEL
    Hobie
    Heavy Duty Swivel with Aluminum Cam Roller Fairlead Murrays Part# 25-3020 Swivel cam cleats are ideal for main traveler control and up-release jib cleating systems. This is a Murrays product that features an Aluminum Harken 150 cam cleat, and HD swivel plate and a HD roller fairlead. The advantage to the roller fairlead is that it can take a larger line diameter, up to 1/2", and handle heavy loads at extreme angles. Making it ideal for larger catamarans and sailors in high wind areas.
    HEAVY DUTY SWIVEL WITH ALUMINUM CAM AND ROLLER FAIRLEAD
    Murrays Sports
    Harken 27mm Micro Eyestrap Murrays Part# 28-0281 Eyestraps are useful accessories. They form light-duty mounting bases for blocks, serve as lash-down points, and can be used for fairleads. Eyestrap for Cam-Matic 338, 423, 468, 471 Stainless steel eyestrap mounts on Harken aluminum Micro Cam-Matic (#28-0338) or Micro Carbo-Cam (#28-0423).
    HARKEN 27MM MICRO EYESTRAP
    Harken
    Out of Stock
    H20 Upper Forestay 5/32" Black Wire with Roller Furling Murrays Part# 002-0735-02 Black upper forestay for Hobie® 20 with roller furling setup. Constructed to factory specifications. Compare to Hobie Cat® Part# 40810011
    H-20 UPPER FORESTAY 5/32" BLACK WIRE WITH ROLLER FURLING
    Murrays Sports
    H20 Jib Halyard Roller Furling Murrays Part# 002-0786-00 Jib halyard for Hobie® 20 with roller furling is constructed to factory specifications. Order 24' of #39-0221 1/8" Dacron line for jib halyard line. Compare to Hobie Cat® Part# 48661001
    H-20 JIB HALYARD ROLLER FURLING
    Murrays Sports
    H20 Bridle 5/32" Black Wire Murrays Part# 002-0715-22 One bridle for Hobie® 20 is constructed to factory specifications.  Compare to Hobie Cat® Part# 40822001
    H-20 BRIDLE 5/32" BLACK WIRE
    Murrays Sports
    DACRON INSIGNIA CLOTH - BLACK
    Murrays Sports
    Clamcleat Leech Line Cleat Murrays Part# 27-0212 Jib halyard tensioning cleat for zippered luff jibs. The low-profile, white nylon Clamcleat® can be sewn or riveted onto sails and technical fabrics. It can be mounted in two positions on the sail. The tooth design allows a quick, positive lock that is easy to release. It is an ideal cleat for adjusting leech lines. Use a backplate when riveting a cleat onto fabric, as it will prevent the rivet pulling through. Includes: backing plate and 2x flare rivet
    CLAMCLEAT LEECH LINE CLEAT
    Clamcleat
    Clamcleat PowerGrip II Murrays Part# 27-0262 The Clamcleat® CL262 Power Grip 2 is for two-handed use where even more pulling power and control are required. It is light, strong and convenient to carry in your pocket. The anodized aluminum tool grips 3/32" to 1/4" diameter lines.
    CLAMCLEAT POWERGRIP II
    Clamcleat
    Clamcleat PowerGrip I Murrays Part# 27-0261 The 27-0261 Clamcleat® Power Grip 1 is for single-handed use. It allows you to pull twice the load compared to using your bare hand and is equally suitable for right- or left-handed use. Line pulls from center of tool. The anodized aluminum tool features two sets of grip cleats to grip 1/8"-1/4" diameter lines. Tool length is 3-3/4" long. Hobie Cat® uses item Part# 2070 for the Power Grip I.
    CLAMCLEAT POWERGRIP I
    Clamcleat
    Recently viewed