Murrays Marine - Catamaran specialists

All

3135 products

    All Murrays Products: Hobie, Nacra, Prindle rigging, rudder parts, sails, trampolines, spare parts, lines and more. 

    3135 products
    Nylon Port Fastener Kit The Port Nylon Fastener Kit includes all the necessary nylon fasteners (screws, washers and nuts) plus marine silicone sealant for the installation of two access ports, also known as hatches, on to a catamaran like a Hobie, Nacra or Prindle. Use this page to order: 001-1159 White 001-1160 Black
    NYLON PORT FASTENER KIT
    Murrays Sports
    Rivet 6-18 Aluminum RIVET POP 3/16 x 1 1/8th inch aluminum rivet to hold the traveler control sheave on a H16 front crossbar from late 90s to current. Hobie Part Number 8011251
    RIVET 6-18 ALUMINUM
    Hobie
    H16 Assembly Manual Murrays Part# 50-23450000 Hobie Cat® factory manual for the Hobie 16®. The manual is also available for free download at the Hobie Cat® Web site.
    H-16 ASSEMBLY MANUAL
    Hobie
    PRINDLE 15/16/18 SHROUD ANCHOR PIN
    Misc
    Out of Stock
    Getaway Tiller Crossbar (Older Castings, Tendon Style Connectors) Murrays Part# 50-37522001 Hobie Getaway tiller crossbar for boats with tendon style connectors and older style rudder castings. Hobie Part# 37522001
    GETAWAY TILLER CROSSBAR
    Hobie
    H18 Traveler Roller Skid Murrays Part# 50-61810000 Hobie® factory replacement roller skid for Hobie® 18 main traveler.
    Hobie 18 main traveler car parts list - 6180001, 8040301, 61870000, 61880000, 60190000, 8050311, 61842000, 8060121, 61810000, 61830000, 61852000, 8020431
    H-18 TRAVELER ROLLER SKID
    Hobie
    Soft Grip Standard Extension .570 x 11" Murrays Part# 007-3206 This is a grip upgrade for the standard Hobie Tiller extension, it will also fit the Murrays fixed tiller extension as well. Hobie Part# 3206
    SOFT GRIP STANDARD EXTENSION .570 x 11"
    Hobie
    Ronstan Toggle Pin 15.9mm Long 6.4mm Diameter Murrays Part# 21-1155 Replaces 1/4" diameter clevis pin of same grip length. Also available with a lanyard 21-1155L
    RONSTAN TOGGLE PIN 1/4 x 5/8"
    Ronstan
    H20 Outhaul Bearing Murrays Part# 50-40250001 Hobie® factory replacement outhaul bearing for Hobie 20. This part is installed into the outhaul car outside of the boom, it keeps the car from falling down into the car slot. Hobie Part# 40250001
    H-20 OUTHAUL BEARING
    Hobie
    Out of Stock
    H16 European Mast Base Murrays Part# 51-16000010
    H-16 EUROPEAN MAST BASE
    Hobie
    CINCH RING 3/8 10mm (X-2) EACH Stainless steal cinch ring for use on 3/8" shock cord or line. Sold Individually. Hobie part 53180010
    CINCH RING 3/8 10mm (X-2) EACH
    Misc
    CINCH RING 5/16 8mm
    Misc
    The Staymaster Turnbuckle - No more hit-and-miss wire tensioning! Shorten your diamond wires and use an adjustable tension mechanism to easily repeat tension settings
    STAYMASTER TURNBUCKLE 1/8
    Staymaster
    MULTI-PURPOSE MARINE GREASE 2oz
    Misc
    NACRA OWNERS MANUAL
    Murrays Sports
    Hobie Main Sail Headboard w/ rivets Replacement Hobie factory Hobie Main Sail Headboard w/ rivets. Hobie part #68330011
    HOBIE ALUMINUM HEADBOARD WITH RIVETS
    Hobie
    Out of Stock
    Mystic Wing Board Leash - Waist Murrays Part# 57-1051 Crafted from a 7mm cord, the waist attachment board leash was designed for those riding with a harness or waist belt. Providing a secure connection to your foil board, this board leash features a safety release harness connection and a flexible leash connection with a double swivel. Features: Safety release harness connection Flexible leash connection with double swivel 7mm cord
    MYSTIC WING WAIST BOARD LEASH
    Mystic
    Save $10
    Manera Wing Harness Line Murrays Part# The MANERA HARNESS LINE is made out of a spectra core with a special anti-abrasion sleeve. It ensures that the line withstands both traction and friction. The HARNESS LINE should be attached to the wing handles in order to make sure the harness is well balanced between front and back traction. With its Velcro attachment, you can easily attach it to any wing, and make sure you can swap it from wing to wing in a matter of seconds.
    MANERA WING HARNESS LINE
    Manera
    Hobie Wave Jib Cleat Bracket Murrays Part# 50-38999002 Hobie Wave Jib Cleat Bracket is mounted to the inner side of the hull when adding a factory jib kit. Hobie Part# 38999002
    HOBIE WAVE JIB CLEAT BRACKET
    Hobie
    Sale
    Murrays part# 32-344081 The DaKine Slim footstrap has a simple, lightweight and comfortable design. Great for both kitesurfing and windsurfing. Designed for use on Foilboards and strapped surfboards alike. Users will love the minimal light weight design, flexibility, and support of the Slim footstraps.
    DAKINE SLIM FOOTSTRAP-FLORIDA BLUE
    Dakine
    Save $5
    Out of Stock
    Washer 5/16 X 9/16 Flat Murrays Part# 50-8080181 Hobie Part# 8080181
    WASHER FLAT 5/16 X 9/16"
    Hobie
    TEF-GEL HYDROFOIL HARDWARE LUBRICANT
    Misc
    Murrays M8 x 25mm Titanium Hydrofoil Screws
    M8x25mm TITANIUM TORX BOLT
    Murrays Sports
    Getaway Main Lacing Rod 64-3/4" Murrays Part# 50-37880011 This is the lacing rod that is used to tension the main trampoline on the Hobie Getaway. Hobie Part# 37880011
    GETAWAY MAIN LACING ROD 64-3/4"
    Hobie
    H16 Mesh Trampoline-Black Murrays Part# 50-20970055 Hobie factory black mesh trampoline for Hobie 16 is heat-welded for easy maintenance and a long life. Heat-welding lasts longer in the sun than trampolines that are stitched at the seams. Mesh allows wind and water to pass through, so you're not sitting in a puddle. Includes halyard pocket. Legal for Hobie class racing. Hobie Part# 50-20970058
    H-16 MESH TRAMPOLINE-BLACK
    Hobie
    Sale
    Forward Wing Harness Belt Murrays part# 47-0640 The Forward Wing Harness Belt was designed specifically to be a minimalist wing foiling harness that can also be used as a leash attachment point. The ergonomic harness line hook easily engages and disengages the harness line. The hook slides on the belt to allow for comfortable toeside riding and can be pushed to the side for prone paddling. The Wing Belt also serves as a leash attachment point for your wing and or board leash.
    FORWARD WING HARNESS BELT
    Forward Wip
    Save $35.05
    Out of Stock
    Astoundingly thin and flat, the DW210 HM stabilizer was built for speed. Its high aspect ratio will offer incredible glide at high speeds and will help you stay up and flying above the water endlessly. This stabilizer will not only optimize your velocity but also your pumping efficiency and will help you keep your momentum.
    F-ONE 210 DOWNWIND STABILIZER
    F-One
    Save $100
    F-One Foil Track Stopper
    F-ONE RUBBER FOIL TRACKER STOPPER-PAIR
    F-One
    Out of Stock
    HOBIE SAIL AND BOOM BAG STANDARD
    Hobie
    Screw 12x24x1 Pan Head (Long Lock) Murrays Part# 50-8030402 This screw is used to hold the rudder gudgeons on the back of the boat.  Hobie Part# 8030402
    SCREW 12x24x1 PAN HEAD (LONG LOCK)
    Hobie
    Rivet Washer Nylon Commonly used on NACRA catamarans to insulate the stainless rivet from aluminum extrusions. Nacra PN 40200
    RIVET WASHER NYLON
    Murrays Sports
    Orion 500 2mm Mini Spool The Orion 500 2mm mini spool is a premium polyester all round line. The product features a 16-plait braided polyester cover combined with polyester yarn. Specifications: Core: polyester Cover: polyester 16 Diameter: 2mm Length: 15m Colors: red, yellow, black
    ORION 500 2MM MINI SPOOL
    Robline
    The Murrays Hobie Getaway line package contrains all the lines on a Hobie Getaway. The Main and Jib sheets are Robline Neptune 500 and the control lines are Pelican VLS, Very Low Stretch.
    H-GETAWAY LINE PACKAGE
    Murrays Sports
    Washer 3/8 X 3/4 Nylon for 07-1953 Murrays Part# 50-8080691 Washer for tiller arm bolt #50-8040171. Hobie® factory item
    WASHER NYLON 3/8 X 3/4"
    Hobie
    Hobie factory replacement part for Hobie 20-style tiller connector and adjuster kit (#07-1953). Hobie part number 40540000 and 40540001. Murrays.com - in stock
    Hobie 1953 tiller connection kit - new style
    HOBIE THREADED TILLER CONNECTOR ADJUSTER
    Hobie
    H14/16/18/20/Wave Rudder Cam Stop Plate Murrays Part# 50-20352000 Hobie factory replacement rudder cam plate for Hobie 14, 16, 17, 18 (1987 and later) and Wave (with aluminum castings). Hobie Part# 20352000
    H-14/16/18/20/WAVE RUDDER CAM STOP PLATE
    Hobie
    Roller Furling Darby Ring (Small) Murrays Part# 50-8062501 Hobie® factory replacement small Darby ring for roller furler. Hobie Part# 8062501
    ROLLER FURLING DARBY RING (SMALL)
    Hobie
    Gooseneck Boom Pin Murrays Part# 50-50502201 Hobie Cat gooseneck boom pin for securing boom assembly to mast at the gooseneck joint. Hobie Part# 50502201
    HOBIE GOOSENECK BOOM PIN
    Hobie
    Tiller Tie Bar Fitting with Tendon Murrays Part# 56-4536 Tiller tie bar fitting with tendon fits all Inters
    NACRA TILLER TIE BAR FITTING WITH TENDON
    NACRA
    Out of Stock
    H14/Wave Mast Base Murrays Part# 50-10640011 Hobie® factory replacement black mast base for Hobie® 14 or Wave. Use four 6-6 rivets (#19-5032) for installation.    
    H-14/WAVE MAST BASE
    Hobie
    Recently viewed