Murrays Marine - Catamaran specialists

All

3153 products

    All Murrays Products: Hobie, Nacra, Prindle rigging, rudder parts, sails, trampolines, spare parts, lines and more. 

    3153 products
    Quick Release Pin Detent 1/4 X 1" Murrays Part# 18-4D100 This quick pin has a spring-loaded ball that exerts sufficient pressure to help avoid accidental release. Measures 1/4" diameter x 1" long. Can be used to replace 1/4" clevis pins up to 1" long.  Not recommended for use in shroud adjusters or chain plates.
    QUICK RELEASE PIN DETENT 1/4 X 1"
    Misc
    Nut Nylock 1/2-13" Stainless Steel Thin Murrays Part# 19-2531 Thin stainless steel 1/2-13 hex nut with nylock insert will not rust or work loose if properly installed. Used on 1/2" pylon bolt on most older Hobie 16's (changed to 3/8" in 1994). Equivalent to Hobie #8050631.
    NUT NYLOCK 1/2-13 (SS) THIN
    Misc
    Murrays Part# 001-0015 Need a little help? Use the Maxi Rigg tool to hand-hold spinnaker sheets or pull anchor lines up to 1/2" diameter with minimum strain on hands or grip. Hold and control spinnaker sheets. Unique safety swivel allows for easy and safe release of lines in case of sudden or too much pull. You can also use two to pull anchor lines hand-over-hand. Assorted colors available Line size: 5/16" to 1/2" Hobie Cat® uses item #2069 for the Maxi Rigg Tool.
    MAXI RIGG TOOL
    Easy-Rigg
    Inter 20 Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-5405-12 Single black shroud for Inter 20 is hydraulically swaged to be clean and strong. Constructed to factory specifications.
    INTER 20 SHROUD 5/32"BLACK WIRE ROLLER SWAGED
    Murrays Sports
    Harken 57mm Carbo 10:1 System Murrays Part# 28-101 This system offers 10:1 purchase power! Light weight, low profile and very strong, these Carbo AirBlocks® have enormous working range, with a higher working load than standard blocks, even though they are lighter in weight. The base block has an on-off ratchet and will roll freely in both directions when disengaged, such as in light air. Engage the ratchet in heavy air when you need the mechanical advantage of the ratchet.
    HARKEN 57mm CARBO 10:1 SYSTEM
    Harken
    Out of Stock
    H20 Jib Halyard Roller Furling Murrays Part# 002-0786-00 Jib halyard for Hobie® 20 with roller furling is constructed to factory specifications. Order 24' of #39-0221 1/8" Dacron line for jib halyard line. Compare to Hobie Cat® Part# 48661001
    H-20 JIB HALYARD ROLLER FURLING
    Murrays Sports
    H20 Forestay Roller Furling 5/32" Black Wire Murrays Part# 002-0745-32 Lower forestay for Hobie® 20 with roller furling setup. Constructed to factory specifications.  Compare to Hobie Cat® Part# 48814001
    H-20 FORESTAY ROLLER FURLING 5/32" BLACK WIRE
    Murrays Sports
    Out of Stock
    H18SX Jib Halyard with Shackle Murrays Part# 002-0686-00 Jib halyard with shackle for Hobie® 18SX is constructed to factory specifications.; Use 20' of 1/8" line to to complete your jib halyard or our jib halyard kit with sister clips. links below in related items. Compare to Hobie Cat® Part# 68661001
    H-18SX JIB HALYARD WITH SHACKLE
    Murrays Sports
    Cat Trax Tire Only 21x12 Murrays Part# 13-1401-3 Replacement 21″x12.0-8 tire only (without rim) for Cat Trax beach wheels.
    CAT TRAX TIRE ONLY 21X12
    Cat Trax
    Cat Bag 4" Murrays Part# 001-1169 The Cat Bag provides handy storage inside a deck port! The sturdy nylon bag with plastic collars hangs inside 4" access port on a molded shoulder. 12" deep. Hobie Cat® uses #5402 for this item.
    4" PORT CAT BAG
    Sea Dog
    3-Hole Pad Kit Murrays Part# 001-0110 This base kit is for Harken®, Hobie® or Murray 360 cleats without swivel base adapters. Kit includes one 3-hole base, one swivel base adapter (#25-3001), plus three #10 FHSMS (#19-1626). Ronstan swivel 360 cleats include swivel base adapters, so this kit is not necessary. Fits Hobie® or Prindle elliptical crossbar.
    3-HOLE PAD KIT
    Murrays Sports
    Hobie Main Sail Headboard w/ rivets Replacement Hobie factory Hobie Main Sail Headboard w/ rivets. Hobie part #68330011
    HOBIE ALUMINUM HEADBOARD WITH RIVETS
    Hobie
    H16 Mesh Trampoline-Black Murrays Part# 50-20970055 Hobie factory black mesh trampoline for Hobie 16 is heat-welded for easy maintenance and a long life. Heat-welding lasts longer in the sun than trampolines that are stitched at the seams. Mesh allows wind and water to pass through, so you're not sitting in a puddle. Includes halyard pocket. Legal for Hobie class racing. Hobie Part# 50-20970058
    H-16 MESH TRAMPOLINE-BLACK
    Hobie
    H16 Jib Sail (White) Murrays Part# 50-20992010 This is an OEM Hobie White Jib for the Hobie 16 sailboat. This is class legal for One Design Hobie Racing. This sail includes batten ties
    H-16 JIB SAIL (WHITE)
    Hobie
    EASY RIGG TOOL RED
    Murrays Sports
    The Hobie Wave Forestay Adjuster w/ Toggle Murrays PN 001-2085 The Murrays Wave Forestay Adjuster with Toggle is a must have for speeding up the rigging process on your Hobie Wave. This adjuster includes a toggle pin with lanyard that can't fall off of your bridle assembly. This allows you to easily raise and pin the mast single handed! The toggle is affixed around the center of the adjuster with a slightly longer lanyard to keep it out of the way of your bridle vane or other accessories.
    Wave Forestay Adjuster w/ Toggle Murrays PN 001-2085 The Murrays Wave Forestay Adjuster with Toggle is a must have for speeding up the rigging process on your Hobie Wave. This adjuster includes a toggle pin with lanyard that can't fall off of your bridle assembly. This allows you to easily raise and pin the mast single handed! The toggle is affixed around the center of the adjuster with a slightly longer lanyard to keep it out of the way of your bridle vane or other accessories.
    WAVE FORESTAY ADJUSTER W/ TOGGLE PIN
    Murrays Sports
    OXEN BLOCK REPAIR AND EVALUATION
    Oxen
    HOBIE GETAWAY RIGGING KIT Complete standing rigging package for the Hobie Getaway.  If you need the swivel above the forestay as well it is linked below with the shackle that attaches it. Kit includes: Main Halyard Forestay 2 x Shrouds (Side Stays) 2 x Bridles Hobie part numbers 37651001, 37790001, 37810021, 37822011
    GETAWAY RIGGING KIT
    Murrays Sports
    Hobie Shockcord Hook Murrays Part# 007-81272 Easy to install shockcord snap hook. No tools required. Reusable! 1/4" hook. Details: Easy to install shockcord snap hook No tools required Reusable! 1/4" hook Hobie Part# 2101
    Hobie Shockcord Hook Murrays Part# 007-81272 Easy to install shockcord snap hook. No tools required. Reusable! 1/4" hook. Details: Easy to install shockcord snap hook No tools required Reusable! 1/4" hook Hobie Part# 2101
    HOBIE SHOCK CORD HOOK
    Hobie
    Sale
    FORWARD WIPSUN SUNGLASSES
    Forward Wip
    Save $54.95
    MURRAYS SUNSET TEE, Murrays Marine, Murrays.com
    MURRAYS SUNSET T-SHIRT FRONT
    MURRAYS SUNSET TEE
    Murrays Sports
    Sale
    Mystic Block Impact Vest - Black The Mystic Block Impact Vest features a front YKK zipper and a low profile waist section so it can easily fit with any kiteboarding harness. Features CE approved YKK Front-zip Clash foam Non-padded harness waist part Zipper lock Please note: This is not a floatation device / buoyancy aid Materials M-Flex (75%) JAKO neoprene **This vest offers the most chest room in the Mystic line up, great for men with broad chests or women who don't want a ladies vest.**
    MYSTIC BLOCK IMPACT VEST-BLACK
    Mystic
    Save $10.99
    Sale
    Mystic Rash Glove - Short Finger The Mystic Rash Glove is a lightweight water glove that is ideal for kiting, paddling, winging and other light duty use. UV blocking flexible back with a reinforced palm makes it great for protecting both sides of your hand. Features Amara palm Velcro wrist strap Materials Nylon (80%) Spandex (20%)
    MYSTIC RASH GLOVES
    Mystic
    Save $7.99
    The Dakine Half Finger Gloves are designed for watersports such as kayaking, kiteboarding, windsurfing and sailing. They combine ultimate performance with breathable nylon top skin, with a durable non slip palm construction. Unique pull tabs assist in removal of the gloves.
    DAKINE 1/2 FINGER GLOVES
    Dakine
    Ronstan Sticky Fingerless Race Glove CL730 provide hand protection, a secure grip, and reduce fatigue by minimizing the physical effort required to hold rope. Features: Amara synthetic leather for maximum durability, minimum stretch and shrinkage. Double Aramid stitching in high wear areas. Double thickness palm and fingers for protection and grip. UPF 50 (Ultra-Violet Protection Factor). Mesh panels for flexibility, comfort and quick drying. Low-cut neoprene
    RONSTAN STICKY FINGERLESS RACE GLOVES
    Ronstan
    Sale
    Mystic Stealth Spreader Bar 240, 280, 320cm
    MYSTIC STEALTH SURF SPREADER BAR
    Mystic
    Save $40.99
    ROBLINE SK78 1.6MM KITE LINE 60M SPOOL
    Robline
    Ultra Halyard Line 1.6mm This is a fantastic halyard line for self tacking jib systems that use the small nacra hook.
    ULTRA HALYARD LINE 1.6mm
    Murrays Sports
    Titanium Hydrofoil Track Lock Universal Track Nut Murrays part# 55-0030T The Only Titanium Universal Track Nut! These track nuts lock into position with a set screw, setting them apart from other track nuts on the market. They were designed to be used with any foil board track and are made from 100% GR5 Titanium so corrosion will never be an issue. They are designed to work with any foil system whether it uses m6 or m8 hardware. The Track Lock Universal track Nut comes with both M6 and M8 threaded screw
    TITANIUM HYDROFOIL TRACK LOCK UNIVERSAL TRACK NUT (4)
    Misc
    Out of Stock
    H16 Assembly Manual Murrays Part# 50-23450000 Hobie Cat® factory manual for the Hobie 16®. The manual is also available for free download at the Hobie Cat® Web site.
    H-16 ASSEMBLY MANUAL
    Hobie
    Out of Stock
    Ronstan Eye & Eye Swivel Murrays Part# 21-0078 This ball bearing swivel by Ronstan has lower friction and higher working loads than non-ball bearing versions. It is used in conjunction with blocks and rigging systems to provide articulation and rotation. Not suitable for high-speed rotating applications.
    RONSTAN ROLLER FURLING SWIVEL (EYE/EYE)
    Ronstan
    Hobie European Rudder Cam Murrays Part# 51-14061180 Hobie Europe factory replacement rudder cam. Similar but not exactly the same as the US version. Rudder cams should be inspected and replaced periodically. Always replace cams that are bent out of shape. Hobie part# 14061180
    HOBIE EUROPEAN RUDDER CAM
    Hobie
    The Selma fid (needle) is the only tool for splicing all kinds of rope. Selma fids are made of highly polished stainless steel. Made in Norway and patented worldwide. Please note that the appropriate fid size will depend on the type and construction of line. The purchase of a set of 4 or 5 fids may be a better option if you are unsure of the fid size you need.
    SELMA FID 7.5mm 5/16-3/8"
    Selma
    The Staymaster Turnbuckle - No more hit-and-miss wire tensioning! Shorten your diamond wires and use an adjustable tension mechanism to easily repeat tension settings
    STAYMASTER TURNBUCKLE 1/8
    Staymaster
    Alpha Rope Cruiser 24 6mm Grey Murrays Part# 39-4606gy Cruiser 24 Kmix from Alpha Ropes is a great all around line for sheets and control lines. This 6 mm double braid line is light weight and offers great grip. It features strong HT polyester core with 24 plait polyester cover for great durability and grip.
    Cruiser 24 6mm Grey Murrays Part# 39-4606gy Double braid. 16 strand HT Polyester core, 24 braid HT Polyester cover. All around, great performance Ideal for sheets and control lines
    CRUISER 24 6MM GREY
    AlphaRope
    NACRA OWNERS MANUAL
    Murrays Sports
    O’Pen Skiff Tiller End Plug Murrays Upgrade Murrays Part# 65-316970 The O’Pen Skiff Tiller End Plug Murrays Upgrade is the solution to a weak point on the O’Pen Skiff boat. This upgrade replaces the two standard tiller end plugs that go on each pintle. Only two are required instead of four because the Murrays Tiller end plug is solid and spans the whole distance inside the rudder housing. So you don't need two per pintle only per rudder.
    O'PEN SKIFF TILLER END PLUG (MURRAYS UPGRADE)
    Murrays Sports
    Out of Stock
    Manera Wing Harness Line Murrays Part# The MANERA HARNESS LINE is made out of a spectra core with a special anti-abrasion sleeve. It ensures that the line withstands both traction and friction. The HARNESS LINE should be attached to the wing handles in order to make sure the harness is well balanced between front and back traction. With its Velcro attachment, you can easily attach it to any wing, and make sure you can swap it from wing to wing in a matter of seconds.
    MANERA WING HARNESS LINE
    Manera
    Spreader Tip Cover Murrays Part# 56-9862 These vinyl spreader bar end covers are real sail-savers! The smooth, resilient cover protects the jib luff from wear and tear from cotter keys and sharp edges. Nacras (except original 5.2 with non-adjustable spreaders) and Prindles. Nacra Sailing factory replacement item# 30322
    NACRA SPREADER TIP COVER
    NACRA
    GATH helmet GOPRO MOUNT W/FASTENER
    GOPRO MOUNT WITH FASTENER
    Gath
    Recently viewed