Murrays Marine - Catamaran specialists

All

3153 products

    All Murrays Products: Hobie, Nacra, Prindle rigging, rudder parts, sails, trampolines, spare parts, lines and more. 

    3153 products
    Replaceable Aluminum Trap Handle Murrays Part# 007-2010 Foam-covered aluminum handle is easily installed onto existing trapeze wire. Carry a spare as a temporary repair, then replace the wire at your convenience. Each. Hobie Cat® Part# 2010
    REPLACABLE ALUMINUM TRAP HANDLE
    Murrays Sports
    Harken 6mm Stamped Shackle Murrays Part# 28-0138 Harken's stainless stamped D-shackle has 1/4" diameter pin. For Harken 3.00" blocks. Stamped shackles are used on most Harken Small Boat Blocks and are appropriate for low loads. For higher loads, select forged and high-resistance shackles instead.
    HARKEN 6MM STAMPED SHACKLE
    Harken
    Harken 29mm Clew Block Murrays Part# 28-0371 Harken's 29mm Carbo block assembly is designed to be sewn onto the clew of a sail. It can be used to replace the jib clew block on Hobie® 14 and 16. Specifications: 330 lb. SWL; 1000 lb. breaking strength; 5/16" maximum line diameter.  On Hobie® 14 and 16, attach with #21-1032 twist pin halyard shackle. Harken Part# 371
    HARKEN 29MM CLEW BLOCK
    Harken
    Clew Kit 5-Hole (H16 Jib) Murrays Part# 001-1012 Clew kit for Hobie® 16 jib includes one pair of anodized aluminum plates with rivets to be set with a hammer. Each plate has five holes and measures 8" maximum length by 1-1/2" wide. Replacement rivets are available separately (#19-5006). This product replaces discontinued item #50-22240000.
    H-16 5 HOLE JIB CLEW KIT
    Murrays Sports
    HOBIE EPO3 RUDDER BLADE
    Hobie
    6815 Prindle mast hinge with pins. Used to raise the mast on the Prindle 15, 16, 18 18.2 and 19.
    6815 Prindle mast hinge with pins. Used on the Prindle 15, 16, 18 18.2 and 19.
    PRINDLE MAST HINGE KIT
    Murrays Sports
    1/4″ Dacron Spun Braid Line The low-stretch characteristics and soft, fuzzy surface of this rope offer excellent grip and make it easy on the hands. The spliceable line has a 100% polyester braided core with a spun polyester braided cover. Uses: Easy on the hands alternative to 1/4″ control line, downhaul, trapeeze adjustment, barber hauler, tramp lacing, Jib sheet etc. Brand and Model: Robline Neptun 500 6mm Diameter: 1/4″ – 6mm Sold per foot Spool: 323′ (100m). Compare to Hobie Cat® #RM014XXX/RM014
    1/4″ Dacron Spun Braid Line The low-stretch characteristics and soft, fuzzy surface of this rope offer excellent grip and make it easy on the hands. The spliceable line has a 100% polyester braided core with a spun polyester braided cover. Uses: Easy on the hands alternative to 1/4″ control line, downhaul, trapeeze adjustment, barber hauler, tramp lacing, Jib sheet etc. Brand and Model: Robline Neptun 500 6mm Diameter: 1/4″ – 6mm Sold per foot Spool: 323′ (100m). Compare to Hobie Cat®#RM014XXX/RM014
    1/4" DACRON SPUN BRAID 6MM
    Robline
    Sale
    Mystic Wingman Harness The Mystic Wingman Harness is a wing foil harness, ideal for longer distances as a lightweight design with simple padding. It sits comfortably around the waist and leaves the rider with plenty freedom of movement. Featuring a selflocking webbing strap, and a leash on the back to attach your board. The injection molded slider hook can hold up to 400kg and slide to either side while you paddle. Features: Light weight design Injection molded slider hook Self locking webbing strap
    MYSTIC WINGMAN HARNESS
    Mystic
    Save $60.99
    Sale
    H-18 MAINSAIL
    Murrays Sports
    Save $440
    Sale
    Hobie 16 jib sail, blue
    +1
    H-16 JIB SAIL
    Murrays Sports
    Save $70
    Out of Stock
    Murrays Hobie 18 Jib sail
    H-18 JIB SAIL
    Murrays Sports
    Save $115
    Sale
    F-One Strike V3 Wing – Catch Lightning The F-One Strike V3 Wing was conceived with the latest technologies and featuring a revolutionary design, the STRIKE V3 is the ultimate performance wing. Whether it’s freeride, freestyle, surfing or freefly, this state-of-the-art wing can do it all. The STRIKE V3 delivers unparalleled performance while guaranteeing comfort, stability, power, precision, durability, and the ability to go upwind quickly and efficiently in any winds.
    F-ONE STRIKE V3 WING
    F-One
    Save $600
    Roller Furler Drum Ball Bearing Murrays Part# 50-61670000 Hobie® factory replacement bearing for Hobie roller furler. A total of 18 ball bearings are required per furler.
    HOBIE ROLLER FURLER BEARING
    Hobie
    Hobie Tiller End Cap (Tendon Style) Murrays Part# 50-37561001 Hobie® factory replacement tendon-style tiller end cap Hobie Part# 37561001
    HOBIE TILLER END CAP (TENDON STYLE)
    Hobie
    Boom Outhaul Bearing H18 Murrays Part# 50-60240000 Boom bearing for Hobie 18 outhaul system
    H-18 BOOM OUTHAUL BEARING
    Murrays Sports
    Out of Stock
    H14/16/17/18 Line Catcher-Black Murrays Part# 30-3530 The Hobie Trampoline Line Catcher is a strip of mesh trampoline that fits in between your center trampoline lacing to prevent lines and other items from falling through the lacing. Works on all 3 piece Hobie 14, 16 and 18 trampolines.
    H-14/16/17/18 LINE CATCHER-BLACK
    Murrays Sports
    Shock Cord Dyneema Cover 4mm - White Murrays Part# 39-7391D Robline 4mm Dyneema coated bungee. Robline part number DSC-4W
    DYNEEMA SHOCK CORD 4mm
    Robline
    Ronstan Clevis Pin Retaining Clip Murrays Part# 21-0413 The Ronstan Spring Clip is a stainless spring clip for quick rudder pin removal or Hobie 14, 16, 17, 18, 20, Wave and Getaway models. This handy little pin is also called a hairpin cotter, bridge pin, hitch pin clip or R clip. Great convenience item for all boats with rudder pins, ie: Hobie, Nacra and Prindle 15, 16, 18, 18-2, 19, 19MX, and Escape. Ronstan Part# RF413
    RONSTAN CLEVIS PIN RETAINING CLIP
    Ronstan
    Out of Stock
    Trampoline Slug Slide Murrays Part# 56-9892 Use for lacing tramp to rear crossbar to eliminate the need for an aft lacing strip. The slug can also be used in sail track. Used on the Hobie Getaway and Hobie 21SC forward trampolines Hobie Part # 96280000
    NACRA TRAMPOLINE SLUG SLIDE
    NACRA
    Sale
    Murrays part# 32-344081 The DaKine Slim footstrap has a simple, lightweight and comfortable design. Great for both kitesurfing and windsurfing. Designed for use on Foilboards and strapped surfboards alike. Users will love the minimal light weight design, flexibility, and support of the Slim footstraps.
    DAKINE SLIM FOOTSTRAP-FLORIDA BLUE
    Dakine
    Save $5
    Powerstick Yoke Murrays Part# 001-134-4 Replacement Powerstick tiller yoke
    POWERSTICK YOKE
    Murrays Sports
    Alpha SSR Light Racing Sheet 8mm
    5/16" SSR LIGHT RACING SHEET 8MM
    AlphaRope
    M6 x 25mm Titanium Hydrofoil Screws Murrays Part# 55-0025T The M6 x 25mm Titanium Hydrofoil Screws are stronger and more corrosion resistant than stainless steal foil hardware. Compatible with all M6 foil track inserts. The 25mm length is used for both board to foil connection as well as foil assembly. Commonly used with F-One, Naish, Airush, Takuma, Axis, Sab foil, Armstrong and more. Titanium foil hardware does not require greasing or regular checking. Titanium does not corrode or seize
    M6 x 25mm Titanium Hydrofoil Screws Murrays Part# 55-0025T The M6 x 25mm Titanium Hydrofoil Screws are stronger and more corrosion resistant than stainless steal foil hardware. Compatible with all M6 foil track inserts. The 25mm length is used for both board to foil connection as well as foil assembly. Commonly used with F-One, Naish, Airush, Takuma, Axis, Sab foil, Armstrong and more. Titanium foil hardware does not require greasing or regular checking. Titanium does not corrode or seize
    M6x25MM TITANIUM HYDROFOIL SCREWS
    Murrays Sports
    Murray's Retro Tee Show off your Murrays pride with this Retro Murrays cotton T-Shirt. We brought this design back from the archives to enjoy for every generation. These shirts are super comfy cotton blend and a must-have for any regatta. Don't be caught without one!
    MURRAYS RETRO TEE
    Murrays Sports
    Quick Release Pin Deluxe 3/16 X 1" Murrays Part# 18-3M100 This convenient pin features a deluxe dished head with a hole for lanyard attachment. No other locking pin is faster operating or safer. The pin is also available with a 1/16" x 7" stainless lanyard with nicropress ovals (see related items). Measurements for this quick pin with cup head are 3/16" diameter x 1" maximum grip length (distance from the shoulder to the locking ball bearings).
    QUICK RELEASE PIN DELUXE 3/16 X 1"
    Misc
    O'Pen Skiff Transom Rudder Clip SS Murrays Part# 65-101327 This is the transom clip that holds the rudder assembly onto the back of an O'Pen skiff sailboat. This is a more substantial part than what was found on the earlier O'Pen Bic sailboats. Replace or upgrade your rudder clip today! Tahe Part# 101327
    O'PEN SKIFF TRANSOM RUDDER CLIP SS
    Tahe Outdoors
    Hobie Wave Keeper Pin With Lanyard Murrays Part# 50-38490011 Hobie® factory replacement keeper wire with pin for Wave and Getaway. Hobie part# 38490011
    WAVE KEEPER PIN WITH LANYARD
    Hobie
    Out of Stock
    Hobie Tiller End Cap Murrays Part# 50-10400010 Tiller arm end cap for Hobie Cats is a factory replacement part. Use two 6-6 rivets (item #19-5032) for installation.
    HOBIE TILLER END CAP
    Hobie
    H18 Nylon Roller Furler Sleeve Murrays Part# 50-61940000 Hobie® factory replacement nylon sleeve for roller furling assembly. Hobie Part# 61940000
    HOBIE NYLON ROLLER FURLER SLEEVE
    Hobie
    Half Round Load Spreader Murrays Part# 56-4019 This component is installed into the head of the rudder blade to anchor the rudder locking pin. The Prindle Half Round Load Spreader is for rudder system on all Prindles. Prindle Part# 4019 Nacra sailing factory item# 30973
    PRINDLE HALF ROUND LOAD SPREADER
    NACRA
    Nylon Washer Internal Casting Prindle Murrays Part# 56-F118 Nylon washer is used on Prindle rudder casting to separate the upper sheaves to help keep the line from fouling. Order four per side to remove as much slop as possible. Performance Sports factory item #F118
    PRINDLE NYLON WASHER INTERNAL CASTING
    NACRA
    H18 Mast Bearing Murrays Part# 50-60110000 Hobie Cat® factory mast bearing for Hobie 18. This part sits on the mast step to facilitate mast rotation on the Hobie 18. Hobie part# 60110000
    H-18 MAST BEARING
    Hobie
    Hobie Gooseneck Hinge Vertex Murrays Part# 50-50772031 Hobie® factory replacement gooseneck vertex for all Hobie® Cats. Hobie Part# 50772031
    HOBIE GOOSENECK HINGE VERTEX
    Hobie
    TRAMP CLAMP (10) Minimize chafing at trampoline stress points and reduce the possibility of the trampoline pulling out of the aluminum extrusion. Clamps slide into the aluminum extrusion track. 10 pieces, 1.5" long. By Tren Tec.™ Hobie Cat® uses #2066 for this item
    TRAMP CLAMP (10)
    Tren-Tec
    Tracker Traveler Sheave Replacement Kit Murrays Part# 007-1059 The standard replacement sheave for the tracker traveler on all Hobie® 14, 16 and newer 17's.  Tracker is the term used by Hobie for the rear traveler car. This can also be considered a traveler sheave. Fits Hobie Getaway Main Traveler Car. Hobie® Part# 11880000
    TRACKER TRAVELER SHEAVE REPLACEMENT KIT
    Hobie
    Tracker: Sheave The standard replacement sheave for the tracker traveler on all Hobie® 14, 16 and newer 17's. Hobie® factory item #11880000. Tracker is the term used by Hobie for the rear traveler car. This can also be considered a traveler sheave. Fits Hobie Getaway Main Traveler Car.
    TRACKER TRAVELER SHEAVE
    Hobie
    Screw RHMS #12-24 X 1.25 Stainless Steel Murrays Part# 19-3520 Stainless steel, round head #12-24 x 1.25" machine screw is a replacement screw for Hobie® rudder gudgeon.
    SCREW RHMS #12-24 X 1.25 (SS)
    Misc
    Rivet Solid A 4-6 (1/8 X 3/8) Murrays Part# 19-5005 Solid aluminum 1/8" x 3/8" rivet is designed to be set with a hammer.
    RIVET SOLID A 4-6 (1/8x3/8")
    Misc
    O-Ring: 4" Screw-In Port Murrays Part# 001-1161OR This is an approximate O-Ring for Viking Marine 4" ports.
    O-RING: 4" SCREW-IN PORT
    Sea Dog
    Out of Stock
    Hull Cradle: Bow Murrays Part# 13-7030
    HULL CRADLE: BOW
    Murrays Sports
    Recently viewed