Murrays Marine - Catamaran specialists

All

3171 products

    All Murrays Products: Hobie, Nacra, Prindle rigging, rudder parts, sails, trampolines, spare parts, lines and more. 

    3171 products
    Bolt Hex Head 5/16-18 X 2.50" Stainless Steel Murrays Part# 19-2231 Stainless steel rudder bolt for all Hobie® Cats measures 5/16-18 x 2.50".  Used on Hobie Getaway Bow Spreader - Bow Tang Bolt. Rudder bolt for both the upper and lower rudder casting. Compare to Hobie Cat® Part# 8040341
    BOLT HEX HEAD 5/16-18 X 2.50" SS
    Misc
    Batten Cap Leech Adjustable H16 Jib Each Murrays Part# 012-3004-1 No more knots at the trailing edge. Adjust Hobie® 16 jib sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life. Individual cap. Sold Individually
    ADJUSTABLE LEECH JIB BATTEN CAP (EA)
    Tren-Tec
    Harken 57mm Ratchet Block - Swivel, Becket, Cam Cleat Murrays Part# 28-2139 Harken 57mm jib block is great for use on almost all Hobie Cat, Nacra and Prindle. Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. Specifications Sheave diameter: 2-1/4" Length: 4-15/16" Weight: 9 oz Shackle pin diameter: 3/16" Maximum line diameter: 3/8" Maximum working load: 600 lb. Breaking load: 1500 lb.
    HARKEN 57MM RATCHET BLOCK- SWIVEL, BECKET, CAM CLEAT
    Harken
    Sale
    Bow Shackle 1/4” with hole - Odd
    Misc
    Save $10
    Harken 4mm Shallow Bow Shackle Murrays Part# 28-2131 Forged stainless steel shackles are polished to a high luster and are stamped with the screw pin diameter. Bow shackles are best for multidirectional loads. Shallow bow shackles are proportionally wider for their length than regular bow shackles.
    HARKEN 4MM SHALLOW BOW SHACKLE
    Harken
    Alpha SSR 10mm Racing Sheet
    25/64" SSR RACING SHEET 10MM
    AlphaRope
    Hobie 14 Trapeze Wires - Hobie Part Number - BLACK 1475B - WHITE 1475W
    H-14 TRAPEZE WIRES (2)
    Murrays Sports
    H-16 MAIN SHEET SPUN BRAID
    Robline
    The Tramp Line Kit: When lacing your trampoline, line offers a longer-lasting option over shock cord and is the better choice for sailors who prefer a very tight tramp. As the line stretches slightly over time, sailors can re-tension the tramp lacing to their liking. The line in this kit is black, abrasion-resistant, 8-strand low stretch. #001-2246 for Prindle 15, 16, 18 or Escape includes two 1/8" x 11' lengths and one 3/16" x 22'. #001-2248 for Prindle 18.2 or 19 includes two 19-foot lengths of
    PRINDLE TRAMP LINE KIT
    Murrays Sports
    Out of Stock
    Hobie Wave Hull Seal Cap Murrays Part# 50-38370001 Hobie® factory replacement hull seal for under the seat pad on Wave. Hobie Part# 38370001
    WAVE HULL SEAL CAP
    Hobie
    Clevis Pin 1/4 X 1-1/8 Murrays Part# 22-9803 Stainless steel clevis pin measures 1/4" diameter x 1-1/8" grip length (shoulder to the split ring hole). Compare to Hobie Part 8020420 and 8020410
    CLEVIS PIN 1/4 X 1-1/8"
    Misc
    Boom Outhaul Bearing H18 Murrays Part# 50-60240000 Boom bearing for Hobie 18 outhaul system
    H-18 BOOM OUTHAUL BEARING
    Murrays Sports
    Wind Vane Replacement Tips and Washers  Coffee Marine Wind Vane Tip and Washer kit that fits the original Coffee Marine Bridle Vane and the Hobie Standard Bridle Vane. These are easy to knock off or misplace. Stash a couple in your tool box and never be without your trusty Bridle Fly! 
    WIND VANE REPLACEMENT TIPS & WASHERS
    Murrays Sports
    Tear-Aid Type A is the best-known kite and sail repair tape and it works on all sails, kites and wings: Dacron, Mylar and Ripstop nylon and Bladders. Each package includes one foot of clear repair tape, alcohol pad and instructions. To use, clean area to be repaired with alcohol, cut patch to size, then peel and stick
    TEAR-AID® KIT (6"x12")
    Tear-Aid
    Titanium M6 T-Nut
    TITANIUM M6 T-NUT: HYDROFOIL MAST TRACK INSERTS
    Misc
    Powerstick Yoke Murrays Part# 001-134-4 Replacement Powerstick tiller yoke
    POWERSTICK YOKE
    Murrays Sports
    Sale
    The Mystic Windsurfing Footstrap is a universal footstrap with an internal sizing adjustment system and 3 holes per side for mounting with 1 or 2 screws.
    MYSTIC WINDSURFING FOOTSTRAP
    Mystic
    Save $10
    Murray's Retro Tee Show off your Murrays pride with this Retro Murrays cotton T-Shirt. We brought this design back from the archives to enjoy for every generation. These shirts are super comfy cotton blend and a must-have for any regatta. Don't be caught without one!
    MURRAYS RETRO TEE
    Murrays Sports
    Rooster Tell Tails Murrays Part# 48-101579 The Rooster Tell Tails come in a pack of three green and three red self adhesive wool telltales (with TEFLON® treatment) that don´t stick to the sail when they are wet.
    ROOSTER TELL TAILS
    Rooster
    Nacra Main Halyard Ring with Shackle Murrays Part# 56-30312 This shackle connects your Mainsail on your mast, it's knotted on your main halyard. It takes your Mainsail through the slot of your mast to the top where it connects with the Mainsail hook.
    NACRA MAIN HALYARD RING WITH SHACKLE
    NACRA
    Screw 1/4-20 x 5/8 PHMS-P Stainless Steel Murrays Part# 50-8030331 This screw is used on the Hobie wave to secure the eye straps to the inner edge of the crossbars for connecting the tramp pulleys on the classic wave or "other" on the club version.
    SCREW 1/4-20 x 5/8" PHMS-P SS
    Hobie
    Hobie Wave Lower Pintle Murrays Part# 50-38101401 Hobie® factory replacement lower pintle for Wave or Bravo or Getaway Pre-EZ Loc Rudder Systems. Lower pintle assembly for Hobie Wave sailboat. Original Equipment on all Hobie Wave sailboats. Lower pintle should be mounted with four (4) screws. Use Part # 8030171 for boats 2008 and older, or Part # 8030331 for 2009 and newer. Hobie Cat Part # 38101401
    WAVE LOWER PINTLE
    Hobie
    Traveler Sheave H18 - 61890000 Murrays Part# 50-61890000 Hobie factory replacement sheave for Hobie 18 main traveler car. Hobie Part# 61890000
    H-18 TRAVELER SHEAVE
    Hobie
    Hobie 18 main sheet traveler car assembly - Hobie part number 61800001 - Murrays.com
    Traveler Car Assembly H18 Complete - 61800001 - Murrays.com
    H-18 TRAVELER CAR ASSEMBLY
    Hobie
    Out of Stock
    Hobie Tiller End Cap Murrays Part# 50-10400010 Tiller arm end cap for Hobie Cats is a factory replacement part. Use two 6-6 rivets (item #19-5032) for installation.
    HOBIE TILLER END CAP
    Hobie
    Mast Ball H17 Wave Murrays Part# 50-50212301 Hobie factory replacement mast ball for Hobie® 17 and Wave. Ball measures 1-1/2" diameter with a 9/16"-18 threaded hole. This ball can also be glued for use on Trac 16.
    H-17/WAVE MAST BALL
    Hobie
    Jib Clew Plate 3-Hole Murrays Part# 50-62270000 Hobie® factory replacement 3-hole jib clew plate (pair) with rivets. Hobie 18 main sail clew plate Hobie Part# 62270000
    JIB CLEW PLATE 3-HOLE
    Hobie
    H16/18 Jib Halyard Block Assembly Murrays Part# 50-20240001 Wire jib halyard block for Hobie 16 or 18 has a sheave diameter of 1-1/2". This is a good upgrade for boats with jib halyard blocks that have a diameter smaller than 1-1/2". Hobie part# 20240001
    Hobie 16 forestay and jib halyard parts chart
    H-16/18 JIB HALYARD BLOCK ASSEMBLY
    Hobie
    H14/16 Gooseneck Shackle Murrays Part# 50-10772020 Hobie factory replacement gooseneck shackle for Hobie 14 and Hobie 16. Uses a 3/16 x 7/8" clevis pin to connect to the main sail tack. Quick release upgrade option is the 3/16 x 3/4" Quick Release Pin, part #18-3M075L Some newer boats and racers replace the downhaul ring with a second Gooseneck Shackle.
    H-14/16 GOOSENECK SHACKLE
    Hobie
    EZ Lock Lower Pintle Murrays Part# 50-90880221 Hobie® factory replacement lower pintle for EZ Loc rudder system. Fits Hobie Bravo, wave and Getaway boats Hobie Part# 90880221
    BRAVO/WAVE/GETAWAY EZ LOC LOWER PINTLE
    Hobie
    Tracker Traveler Sheave Replacement Kit Murrays Part# 007-1059 The standard replacement sheave for the tracker traveler on all Hobie® 14, 16 and newer 17's.  Tracker is the term used by Hobie for the rear traveler car. This can also be considered a traveler sheave. Fits Hobie Getaway Main Traveler Car. Hobie® Part# 11880000
    TRACKER TRAVELER SHEAVE REPLACEMENT KIT
    Hobie
    Tear-Aid Type A is the best-known kite and sail repair tape and it works on all kite canopy / sail materials: Dacron, mylar and ripstop nylon and kite bladders. Each package includes one foot of clear repair tape, alcohol pad and instructions. To use, clean area to be repaired with alcohol, cut patch to size, then peel and stick.
    TEAR-AID KITE/SAIL REPAIR PATCH (3x12")
    Tear-Aid
    Rudder Pins H14/16 Pair (Nylon) Murrays Part# 001-2271 Nylatron rudder pins are sacrificial for use in the surf (they'll break before your rudder system does) and should be inspected often for wear. Pair of 3/8" x 8" rudder pins with cotter pins for Hobie® 14 or Hobie® 16. Each pair is equivalent to two Hobie Cat® item #10881000 Sold in pairs
    H-14/16 NYLON RUDDER PINS PR
    Murrays Sports
    Mini Fairlead: 1 X 1/4 Murrays Part# 25-0338 Stainless mini fairlead strap measurements: A = 1 1/8" between holes center-to-center B = 3/8" height C = 3/16" hole diameter Compare to Hobie Part 11470000 Rear Crossbar Padeye
    RONSTAN MINI FAIRLEAD: 1 X 1/4
    Ronstan
    Jib Clew Pigtail Kit Murrays Part# 001-4015 Easy-connect Dyneema® jib clew pigtail. Speed up tacks and improve sail shape by moving jib clew blocks away from the jib clew. Color may vary from picture. Features: jib Clew Pigtails move jib clew blocks about 14" from jib clew— saves 4 feet of sheeting/unsheeting per tack! "Locked" eye splices— jib blocks cannot slip or un-tie. Save weight (only 2.4oz) and move weight away from jib clew— better sail shape in light wind. Lightweight, easy-connect—
    jib clew pigtail attachment close up
    JIB CLEW PIGTAIL KIT
    Murrays Sports
    Harken 29mm Bullet Block Murrays Part# 28-0082 Medium-size Harken single bullet block with Delrin® ball bearings works well for control line or jib sheeting lines. The low-friction bullet block is compact and lightweight, with fast trim and release under high or low loads.
    HARKEN 29MM BULLET BLOCK
    Harken
    HOBIE 14 MAIN HALYARD COMPTIP This main halyard is used to raise the main sail on a Hobie® 14 with CompTip on its mast. Constructed to factory specifications. Compare to Hobie Cat® #10657001.
    H-14 MAIN HALYARD COMPTIP
    Murrays Sports
    Out of Stock
    O'PEN SKIFF RUDDER ASSEMBLY
    Tahe Outdoors
    GETAWAY TRAMP LACING KIT
    Murrays Sports
    Sale
    FORWARD NEO IMPACT VEST 50N
    Forward Wip
    Save $24
    Recently viewed