Murrays Marine - Catamaran specialists

All Sailing Parts

3137 products

    Murrays Sports is your best one stop shop for beach catamaran parts and accessories.  We stock both OEM and aftermarket parts for Hobie Cat Catamarans, Nacra Catamarans, and Prindle Catamarans.  We also have parts for Dart, Sol-Cat, G-Cat, Sabot and O'Pen Skiff Sailboats.

    We manufacture many OEM parts for these boats and have a full rigging shop onsite.  We make most of our rigging orders and ship within 24 hours of being ordered.

    Murrays has kits to make your life easier. From Rigging sets, Line Sets, Rudder locking kits, Rudder cam kits, Mast hinge kits, spare parts kits, rudder rebuild kits, cat righting kits, pins and rings kits and more.

    We manufacture many hard to find parts and source parts as needed when the OEM manufacturers discontinue items.

    Murrays has the largest selection of tiller extensions available with aluminum, fiberglass and carbon version s available in fixed length and adjustable length hiking sticks.

    We make 3 generations of Hobie 16 rigging and can help you get what you need for your boat.

    Custom rigging - Murrays can handle custom rigging requests from 3/32, 5/32 and 1/8" wire.  We use top quality 316 stainless wire for the best longevity.  We use professional grade tools and have experienced craftsmen with years of experience handling the rigging.

    Email us lengths, wire type and end pieces for a custom rigging quote.  Send quote requests to info(at)murrays.com.  Use the @ symbol in our email address instead of (at).  If we post the address we get even more spam.

    We offer expert parts advice and can help with any size project from restoring a classic boat to maintaining a fleet of boats.

    We carry a full line of parts from Hobie, Harken, Nacra, Ronstan, Robline, Alpha Rope, Pelican Rope, and Rooster.

    Navigating Murrays.com: The 2 best ways to find the parts you need are to use the Search and the Shop By Boat section.

    The Search is at the top of the page and is for searching key words like Fairlead, 40mm block, cheek block, clew block, downhaul, Nacra Bridle etc. 

    The Shop By Boat section can be found in the dropdown menu. Click on the Pars by Boat menue header and then select your boat under the manufacturer.  Once on your boat you can shop by category: Mast Parts, Rigging, Boom Parts, Front Crossbar Parts, Rudder Parts, Upgrades and Accessories.

    We have hyperlinked Illustrated parts lists for the Hobie 16 and the Hobie Wave on their shop by boat pages.

     

     

    3137 products
    Shackle Pin Only 3/16 Threaded
Murrays Part# 21-0032
Threaded stainless pin fits 3/16" Ronstan D or bow shackle.
    SHACKLE PIN ONLY 3/16" THREADED
    Ronstan
    $7.00
    Ronstan Stainless Steel D Shackle, 1/4"

Murrays Part# 21-0617


UDL BL - The “Uniformly Distributed Load” breaking load of the shackle; the load is applied across the full span of the shackle pin. PL BL - The “Point Load” breaking load of the shackle; the load is only applied at the center or one side of the shackle pin.
Ronstan solid stainless steel shackle has 1/4" pin diameter. Having a spare on hand may mean the difference between sailing or not!
    RONSTAN 1/4" D SHACKLE
    Ronstan
    $10.65
    Harken 29mm Bullet Block

Murrays Part# 28-0082

Medium-size Harken single bullet block with Delrin® ball bearings works well for control line or jib sheeting lines. The low-friction bullet block is compact and lightweight, with fast trim and release under high or low loads.
    HARKEN 29MM BULLET BLOCK
    Harken
    $21.00
    Harken 29mm Clew Block

Murrays Part# 28-0371



Harken's 29mm Carbo block assembly is designed to be sewn onto the clew of a sail. It can be used to replace the jib clew block on Hobie® 14 and 16. Specifications: 330 lb. SWL; 1000 lb. breaking strength; 5/16" maximum line diameter. 

On Hobie® 14 and 16, attach with #21-1032 twist pin halyard shackle.

Harken Part# 371
    HARKEN 29MM CLEW BLOCK
    Harken
    $37.26
    HOBIE 14 MAIN HALYARD COMPTIP


This main halyard is used to raise the main sail on a Hobie® 14 with CompTip on its mast. Constructed to factory specifications. Compare to Hobie Cat® #10657001.
    H-14 MAIN HALYARD COMPTIP
    Murrays Sports
    $125.00
    HOBIE 14 MAIN HALYARD W/SHACKLE
Main halyard with shackle for Hobie 14 with all-aluminum mast (no CompTip) is constructed to factory specifications. A main halyard is used to raise the main sail. Compare to Hobie Cat® #10651001
    Main halyard with shackle for Hobie 14 with all-aluminum mast (no CompTip) is constructed to factory specifications. A main halyard is used to raise the main sail.
Compare to Hobie Cat® #10651001
    H-14 MAIN HALYARD WITH SHACKLE
    Murrays Sports
    $65.00
    Cat Righter Uphaul: Cam-Clt 4:1

Murrays Part# 001-3273

This is the 4:1 block and tackle system only from Murrays' popular Cat Righting Big Bag System (#01-3280). Use with a righting bag to aid in righting a capsized catamaran.
    CAT RIGHTER UPHAUL: CAM-CLEAT 4:1
    Murrays Sports
    $150.00
    Hobie Wave 4:1 Main Sheet System
Murrays Part# 28-041
The Murrays Hobie low profile 4:1 main sheet system for the Hobie Wave. By Adding a fairlead to the back side of the cleat on the base block we have made a low profile main sheet system that no longer needs a becket on the base block. We have also replaced the upper fiddle block with a double block which makes it even more compact. The result is a lightweight, low profile and very strong, made with 40mm Harken Carbo AirBlocks.
    Murrays low profile Hobie Wave main sheet system
    WAVE 4:1 MAIN SHEET SYSTEM
    Murrays Sports
    $265.00
    Out of Stock
    Bow Shackle 1/4” with hole - Odd
    Misc
    Sale price $10.00 Regular price $20.00 Save $10
    Harken 4mm Shallow Bow Shackle
Murrays Part# 28-2131
Forged stainless steel shackles are polished to a high luster and are stamped with the screw pin diameter. Bow shackles are best for multidirectional loads. Shallow bow shackles are proportionally wider for their length than regular bow shackles.
    HARKEN 4MM SHALLOW BOW SHACKLE
    Harken
    $9.45
    Replacement up-loc pin for Hobie EZ LOC rudders. Add the plastic Hobie lanyard, or just use some batten tie line to secure it to the EZ LOC rudder housing. Used on both the Hobie Wave and Hobie Getaway.
Compare to Hobie part 50314001
    Replacement up-loc pin for Hobie EZ LOC rudders. Add the plastic Hobie lanyard, or just use some batten tie line to secure it to the EZ LOC rudder housing. Used on both the Hobie Wave and Hobie Getaway.
Compare to Hobie part 50314001
    EZ LOC UP-LOCK PIN
    Murrays Sports
    $14.99
    Out of Stock
    The F-One M6 x 32mm Titanium Hydrofoil Screws are stronger and more corrosion resistant than stainless steal foil hardware. Used for the mast to fuselage connection on all F-One carbon foils.
    F-ONE M6x32MM TITANIUM HYDROFOIL SCREWS (3)
    F-One
    $13.99
    Spare Parts Kit: Hobie Wave and Getaway, Hobie part number 30308
    WAVE/GETAWAY SPARE PARTS KIT
    Murrays Sports
    $99.00
    Sale
    FORWARD BREATHABLE TITANIUM TOP
    Forward Wip
    Sale price $49.00 Regular price $89.95 Save $40.95
    Ronstan Superflex Slipper with Strap have a soft web sole which gives positive grip and greater range of movement, making this shoes ideal for trapezing. The 2mm slippers are comfortable and ultra-light for mild climates and freedom of movement. The internal toe separator provides improved stability and there is an arch strap for a secure fit. A Glide skin ankle seal minimizes water entry. These slippers feature a multi-layer padded heel, ankle and toe protection and a pull-tab on the heel.
    RONSTAN SUPERFLEX SLIPPER WITH STRAP
    Ronstan
    $42.00
    Alpha SSR 10mm Racing Sheet
    Blue Black
    25/64" SSR RACING SHEET 10MM
    AlphaRope
    from $2.09
    The Tramp Line Kit: When lacing your trampoline, line offers a longer-lasting option over shock cord and is the better choice for sailors who prefer a very tight tramp. As the line stretches slightly over time, sailors can re-tension the tramp lacing to their liking. The line in this kit is black, abrasion-resistant, 8-strand low stretch.

#001-2246 for Prindle 15, 16, 18 or Escape includes two 1/8" x 11' lengths and one 3/16" x 22'.
#001-2248 for Prindle 18.2 or 19 includes two 19-foot lengths of
    PRINDLE TRAMP LINE KIT
    Murrays Sports
    from $16.50
    The Selma fid (needle) is the only tool for splicing all kinds of rope. Selma fids are made of highly polished stainless steel. Made in Norway and patented worldwide.

Please note that the appropriate fid size will depend on the type and construction of line. The purchase of a set of 4 or 5 fids may be a better option if you are unsure of the fid size you need.
    SELMA FID 5.5mm 1/4-5/16"
    Selma
    $15.00
    Trampoline Slug Slide
Murrays Part# 56-9892
Use for lacing tramp to rear crossbar to eliminate the need for an aft lacing strip. The slug can also be used in sail track.
Used on the Hobie Getaway and Hobie 21SC forward trampolines
Hobie Part # 96280000
    NACRA TRAMPOLINE SLUG SLIDE
    NACRA
    $3.00
    Sale
    The Mystic Windsurfing Footstrap is a universal footstrap with an internal sizing adjustment system and 3 holes per side for mounting with 1 or 2 screws.
    MYSTIC WINDSURFING FOOTSTRAP
    Mystic
    Sale price $19.99 Regular price $29.99 Save $10
    Sale
    The Mystic Surf Clickerbar 4.0 features a surf style sliding rope connection. The bar is equipped with the well known clicker system that offers a strong and solid connection.

The Surf Clicker bar does not have the wings like the Stealth bars, meaning it may slide up a little more, but the rope does not rotate the bar upwards like fixed hooks do. And without the wings it works on pretty much any harness available today. The Surf Clickerbar is compatible with all Mystic and Dakine Harnesses.
    MYSTIC SURF CLICKERBAR 4.0
    Mystic
    Sale price $49.00 Regular price $69.99 Save $20.99
    Quick Release Pin Deluxe 3/16 X 1"

Murrays Part# 18-3M100



This convenient pin features a deluxe dished head with a hole for lanyard attachment. No other locking pin is faster operating or safer.

The pin is also available with a 1/16" x 7" stainless lanyard with nicropress ovals (see related items). Measurements for this quick pin with cup head are 3/16" diameter x 1" maximum grip length (distance from the shoulder to the locking ball bearings).
    QUICK RELEASE PIN DELUXE 3/16 X 1"
    Misc
    $24.00
    Sale
    The Dakine Push Button Kite Spreader Bar comes with an all metal push button system for increased durability and a new asymmetrical webbing attachment bracket that better positions the spreader for less upward rotation. Compatible with all Dakine harnesses. Universal design will work with most any harness brand, year and style.

· Kite specific easy hammer head spreader hook
· Push button easy connect and disconnect
· Strong stainless steel retention button
· Freedom shape spreader bar pad
    DAKINE 10" PUSH BUTTON KITE SPREADER BAR
    Dakine
    Sale price $35.00 Regular price $64.00 Save $29
    V JAM CLEAT BOOM (3/16" HOLES)
    Hobie
    $25.00
    Traveler Sheave H18 - 61890000

Murrays Part# 50-61890000



Hobie factory replacement sheave for Hobie 18 main traveler car.

Hobie Part# 61890000
    H-18 TRAVELER SHEAVE
    Hobie
    $9.99
    H18 Nylon Roller Furler Sleeve

Murrays Part# 50-61940000

Hobie® factory replacement nylon sleeve for roller furling assembly.

Hobie Part# 61940000
    HOBIE NYLON ROLLER FURLER SLEEVE
    Hobie
    $5.39
    Nylon Washer Internal Casting Prindle
Murrays Part# 56-F118
Nylon washer is used on Prindle rudder casting to separate the upper sheaves to help keep the line from fouling. Order four per side to remove as much slop as possible.
Performance Sports factory item #F118
    PRINDLE NYLON WASHER INTERNAL CASTING
    NACRA
    $0.50
    Jib Clew Plate 3-Hole

Murrays Part# 50-62270000



Hobie® factory replacement 3-hole jib clew plate (pair) with rivets.

Hobie 18 main sail clew plate

Hobie Part# 62270000
    JIB CLEW PLATE 3-HOLE
    Hobie
    $16.99
    Hobie Tendon Kit (Pre EZ Loc)

Murrays Part# 50-37561011




This tendon kit is the replacement for tendons used on the Hobie Wave, Hobie Getaway, and Hobie Bravo with the first generation EZ Loc rudders. This upgraded version is a notable improvement over the original tendons.

Hobie Part# 37561011
    HOBIE TILLER TENDON KIT (PRE EZ LOC)
    Hobie
    $19.99
    H18 Diamond Wire Complete

Murrays Part# 50-61750001

Replacement Hobie 18 diamond wire assembly, including the turnbuckle, diamond wire roller and end fittings.
    H-18 DIAMOND WIRE COMPLETE
    Hobie
    $150.00
    H-16 JIB BATTEN 67"

67" Murrays jib batten with a trentec batten cap.

Batten #1 in a Hobie 16 jib batten set - 20400001
    H-16 JIB FIBERGLASS BATTEN 67"
    Murrays Sports
    $34.99
    Sale
    SAFETY HOOK KNIFE FORWARD
Murrays Part# 47-0700-2
Forward Hook Safety Knife, can be used in conjunction with the Forward Impact Vest.
The Forward impact vest has a special pocket inside the webbing sleeve to store a Forward Hook Safety Knife.
    FORWARD SAFETY HOOK KNIFE
    Forward Wip
    Sale price $8.99 Regular price $12.99 Save $4
    H-18 PERFORMANCE MANUAL
    Murrays Sports
    $24.95
    Small Fairlead: 1-1/4 X 1/2
Murrays Part# 23-0921
Stainless steel fairlead measurements:
A = 1-1/4" (31.4mm) between holes center-to-center
B = 1/2" (12.7mm) height
C = 3/16" (5mm) hole diameter
    RONSTAN SMALL FAIRLEAD: 1-1/4 X 1/2
    Ronstan
    $1.90
    Quick-Release Pin Deluxe 1/4 X 3/4 with Lanyard
Murrays Part# 18-4M075L
This aircraft quality quick-release pin features a deluxe dished head. No other locking pin is faster operating or safer. Stainless 1/16" x 7" lanyard stainless lanyard is secured on one end with a nicropress oval; the other end is left open so that you can secure with included nicropress oval after attaching the lanyard to your chosen location. Measurements are 1/4" diameter x 3/4" maximum grip length (distance from the shoulder to
    QUICK RELEASE PIN 1/4 X 3/4" WITH LANYARD
    Misc
    $37.00
    Out of Stock
    Mylar Sail Repair Tape 2x10"- Clear

Murrays Part# 010-3410



Make quick and easy sail repairs with Bainbridge's 10' roll of 2"-wide clear mylar polyester film with pressure-sensitive adhesive.
    MYLAR 2x10" SAIL REPAIR TAPE-CLEAR
    Bainbridge
    $9.50
    Mini Fairlead: 1 X 1/4
Murrays Part# 25-0338
Stainless mini fairlead strap measurements:
A = 1 1/8" between holes center-to-center
B = 3/8" height
C = 3/16" hole diameter
Compare to Hobie Part 11470000
Rear Crossbar Padeye
    RONSTAN MINI FAIRLEAD: 1 X 1/4
    Ronstan
    $2.00
    Harken 6mm Stamped Shackle

Murrays Part# 28-0138

Harken's stainless stamped D-shackle has 1/4" diameter pin. For Harken 3.00" blocks. Stamped shackles are used on most Harken Small Boat Blocks and are appropriate for low loads. For higher loads, select forged and high-resistance shackles instead.
    HARKEN 6MM STAMPED SHACKLE
    Harken
    $9.14
    DACRON INSIGNIA CLOTH - BLACK
    Murrays Sports
    $25.00
    Recently viewed