All Sailing Parts

2199 products

    Everything Nacra, Prindle, Hobie and a few more fun odds and ends.

    2199 products
    Out of Stock
    Third Hand Murrays Part# 007-2040 This is the closest thing to "self-steering" a Hobie® 14 or 16. The handy little device grips the hiking stick and holds it at a position of your choice. Great for light air sailing or when paddling in if the wind dies. It also keeps the rudders from flopping around when on the beach. Attaches at each end of the traveler track. Hobie Cat® item #204.
    THIRD HAND
    Hobie
    Out of Stock
    Tie Down H16 Custom Murrays Part# 007-1793 Nice factory tie down kit for H16s, bolts to trailer and has hook and receiver for boat, slip hook into receptacle on boat, toggle the lever, and your boat is secure!
    TIE DOWN H-16 CUSTOM
    Hobie
    Hobie Universal Hull Cradles Murrays Part# 007-1624 Hobie Cat's universal thermoformed cradles are stronger and less likely to scratch than fiberglass. Carpet provides additional hull protection. The unique wide bottom will fit either a round tube or a flat surface and mounting hardware is included. Pair. Dimensions of inside of cradle: Width: 14-1/2" Depth: 4" Width 1" from bottom: 10-1/4"
    HOBIE UNIVERSAL HULL CRADLES
    Hobie
    Fiberglass Stain Remover Murrays Part# 007-0790 This stain-absorbing gel removes oil, rust and stains, road soil on your boat or other fiberglass surfaces. Simply apply, wait a few minutes, then wipe off. Fiberglass Stain Remover is non-abrasive and requires no sanding or compounding. It also removes rust stains from cloth. 16 oz.
    FIBERGLASS STAIN REMOVER
    Davis
    Oxen Block O-Ring Face Place Murrays Part# 005-0761-05
    OXEN BLOCK O-RING FACE PLATE
    Oxen
    Oxen Block Becket Seal Strap Murrays Part# 005-0761-19
    OXEN BLOCK BECKET SEAL STRAP
    Oxen
    Oxen Block Becket Mounting Strap Murrays Part# 005-0761-14
    OXEN BLOCK BECKET MOUNTING STRAP
    Oxen
    Oxen Block Teflon Washer Murrays Part# 005-0761-13
    OXEN BLOCK TEFLON WASHER
    Oxen
    Oxen C Clip 005-0761-11 REBUILDING OXEN BLOCKS Murrays is a complete repair facility for Oxen (aka IFL, Ochsen, Ocean) blocks. Just send us your block and we will rebuild it for an average cost of $60.00 plus parts and shipping. Some individuals have had success repairing their own blocks, but we have had many blocks sent to us in pieces when others have failed. We regret that our technician is not available to answer rebuilding questions.
    OXEN BLOCK C CLIP
    Oxen
    Oxen Block Inner Hub Assembly Murrays Part# 005-0761-07
    OXEN BLOCK INNER HUB ASSEMBLY
    Oxen
    Oxen Outer Hub Lock Ring Murrays Part# 005-0761-06
    OXEN BLOCK OUTER HUB LOCK RING
    Oxen
    Oxen Face Plate Murrays Part# 005-0761-08 REBUILDING OXEN BLOCKS Murrays is a complete repair facility for Oxen (aka IFL, Ochsen, Ocean) blocks. Just send us your block and we will rebuild it for an average cost of $60.00 plus parts and shipping. Some individuals have had success repairing their own blocks, but we have had many blocks sent to us in pieces when others have failed. We regret that our technician is not available to answer rebuilding questions.
    OXEN BLOCK FACE PLATE
    Oxen
    REBUILDING OXEN BLOCKS Murrays is a complete repair facility for Oxen (aka IFL, Ochsen, Ocean) blocks. Just send us your block and we will rebuild it for an average cost of $60.00 plus parts and shipping. Some individuals have had success repairing their own blocks, but we have had many blocks sent to us in pieces when others have failed. We regret that our technician is not available to answer rebuilding questions. The following information is provided so that you can make an informed decision about the re
    OXEN BLOCK HUB CENTER SCREW (2-PC)
    Oxen
    Oxen Sheave Self-Locking Murrays Part# 005-0761-00
    OXEN BLOCK SELF-LOCKING SHEAVE
    Oxen
    Sidewinder Becket Murrays Part# 005-0701 Add on becket for classic Harken Mainsheet systems. The sidewinder becket is for older Harken 2.25" or 3.00" triple blocks. It enables extra purchase ratio without sacrificing low profile block stacking. Some drilling is required for installation.
    SIDEWINDER BECKET
    Murrays Sports
    Kisme "OK" Car Only Murrays Part# 005-0400 H16 Jib car upgrade kit. Stainless construction with remote traveler control attachment points and low profile jib sheet becket attachment. Purchase the H16 Traveler control kit to upgrade your vintage jib car and sheeting system. Sold Individually
    OXEN BLOCK "OK" CAR ONLY (EA)
    Oxen
    Out of Stock
    HOBIE STANDARD BRIDLE VANE Features snap-lock pin and wide indexing support for positive attachment to forestay adjuster. Durable, 7" mylar wind vane freely rotates on 12-1/2" long stainless rod. Wind indicator easily detaches with stainless pull ring. Fits all boats that use a 7- or 10-hole adjuster at the forestay-to-bridle connection. Use adapter #08-1451 to mount it to a Hobie roller furling drum as used on the Hobie Getaway and 18. Hobie item #CM7703.
    HOBIE STANDARD BRIDLE VANE
    Hobie
    Trap Wire Single Custom Murrays Part# 002-8253
    TRAP WIRE SINGLE CUSTOM
    Murrays Sports
    SOL-18 MAIN HALYARD W/SHACKLE Main halyard for a 18' Sol Cat catamaran.
    SOL-18 MAIN HALYARD WITH SHACKLE
    Murrays Sports
    TIGER JIB HALYARD WITH SHACKLE ROLLER FURLING
    Murrays Sports
    Tiger Upper Forestay Roller Furling 5/32" Bare Wire Murrays Part# 002-6035-02 Upper forestay for Hobie® Tiger with roller furling setup does not include swivel.
    TIGER UPPER FORESTAY ROLLER FURLING 5/32" BARE WIRE
    Murrays Sports
    Inter 18 Diamond Wire without Turnbuckle Murrays Part# 002-5394-20 Diamond wire without turnbuckle for Inter 18 is constructed to factory specifications. Includes both sides.
    NACRA INTER 18 DIAMOND WIRE WITHOUT TURNBUCKLE
    Murrays Sports
    NACRA INTER 18 JIB HALYARD
    Murrays Sports
    Out of Stock
    Nacra Inter 18 Double Trapeze (4 handles) The Murrays Double Trapeze is a set of 4 black or white coated trap wires with 4 handles for double trapezing. A single thimble per pair of handles eliminates clutter at that mast connection. Order shock cord, harness loops and adjustment kits separately. A complete trapeze system requires the following: Harness loop - Can't Miss Ring or Dogbone Trap Shock Cord Trap Adjustment kit Sailing Harness ​Trapeze adjustment kits (#001-1121, 001-1130 or 001-1140
    NACRA INTER 18 DOUBLE TRAPEZE BLACK WIRE (4)
    Murrays Sports
    Nacra Inter 18 Roller Furling Forestay 5/32" Black Wire Murrays Part# 002-5345-92 Forestay for Inter 18 is constructed to 5/32" black-coated wire to factory specifications.
    NACRA INTER 18 RF FORESTAY 5/32" BLACK WIRE
    Murrays Sports
    Nacra Inter 18 Bridle 5/32" Black Wire Murrays Part# 002-5315-22 Single black bridle for Inter 18 is constructed of black-coated, 5/32" 1x19 wire to factory specifications.
    NACRA INTER 18 BRIDLE 5/32"BLACK WIRE
    Murrays Sports
    Inter 18 Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-5305-12 Single black shroud for Inter 18 is hydraulically swaged to be clean and strong. Constructed to factory specifications.
    NACRA INTER 18 SHROUD 5/32" BLACK WIRE ROLLER SWAGED
    Murrays Sports
    Inter F17 Diamond Wire without Turnbuckle Murrays Part# 002-5294-20 Set of diamond wires for both sides is a continuous wire with one thimble at the bottom. No turnbuckle. Constructed to factory specifications.
    INTER F17 DIAMOND WIRE WITHOUT TURNBUCKLE
    Murrays Sports
    Lido 14 Forestay 3/32" White Murrays Part# 002-5143-91 Forestay for Lido 14 is constructed of 3/32" white-coated wire to factory specifications.
    LIDO 14 FORESTAY 3/32" WHITE WIRE
    Murrays Sports
    Lido 14 Shroud 3/32" White Wire Murrays Part# 002-5103-91 Single white shroud for Lido 14 is constructed to factory length.
    LIDO 14 SHROUD 3/32" WHITE WIRE
    Murrays Sports
    N-6.0/NA JIB HALYARD
    Murrays Sports
    N-6.0NA BRIDLE 5/32-BLACK WIRE
    Murrays Sports
    N6.0 North American Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-4705-12 Single black shroud for Nacra 6.0NA (North American) is hydraulically swaged to be clean and strong. Constructed to factory specifications. Length: 24' 4" pull-to-pull. To help differentiate between the standard Nacra 6.0 and Nacra 6.0 NA, please note that the standard Nacra 6.0 came stock with a shorter mast and without a bridle foil. The Nacra 6.0 NA came stock with a longer mast and included a bridle foil.
    N-6.0NA SHROUD 5/32" BLACK WIRE ROLLER SWAGED
    Murrays Sports
    N6.0 Diamond Wire with Turnbuckle Murrays Part# 002-4694-20 Diamond wire with turnbuckle for Nacra 6.0 is constructed to factory specifications.
    N-6.0 DIAMOND WIRE WITH TURNBUCKLE
    Murrays Sports
    N6.0 Jib Halyard with Shackle Murrays Part# 002-4683-50 Jib halyard with shackle for Nacra 6.0 is constructed to factory specifications.
    N-6.0 JIB HALYARD WITH SHACKLE
    Murrays Sports
    N6.0 Forestay 5/32" Black Wire Murrays Part# 002-4645-12 Forestay for Nacra 6.0 is constructed of black-coated 5/32" wire to factory specifications.
    N-6.0 FORESTAY 5/32" BLACK WIRE
    Murrays Sports
    N-6.0/6.0NA JIB BLOCK WIRE
    Murrays Sports
    N-6.0 BRIDLE 5/32 BLACK WIRE
    Murrays Sports
    N-5.8 DIAMOND WIRE WITH TURNBUCKLE
    Murrays Sports
    N-5.8 BRIDLE 5/32 BK
    Murrays Sports
    Recently viewed