All Sailing Parts

All Sailing Parts

2262 products

Everything Nacra, Prindle, Hobie and a few more fun odds and ends.

2262 products

Sort

Harken 16mm Cheek Block

Murrays Part# 28-0416

Harken's 16mm check block is a downhaul and turning block and is perfect for small synthetic control lines. 1-13/16" long; 5/8" sheave diameter; 250 lb. SWL; 1200 lb. breaking strength. Use #8 (4mm) RH fasteners.

Harken Part# 416

HARKEN 16MM CHEEK BLOCK

Harken 16mm Triple Block

Murrays Part# 28-0408

The Harken air block offers a very high load in an extremely lightweight block. The block is only 1-13/16" long. The 5/8" sheave will accept line as large as 7/32". 700 lb. SWL; 1200 lb. breaking strength. 

Harken Part# 408

HARKEN 16MM TRIPLE BLOCK

Harken16mm Forkhead Block
Murrays Part# 28-0376
16 mm Forkhead Block is Harken’s® smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb. (113 kg) maximum working load. 
Harken part # 376

HARKEN 16mm FORK HEAD BLOCK

Harken 29mm Triple Block -Becket, Cam Cleat

Murrays Part# 28-0347

Harken's 29mm Carbo block is compact and extremely strong. This triple features U-Locks to hold the swivel in front/side position, or to let it spin freely. The compact cam arm supports high-load purchases of 5:1 or 6:1.

Specifications:

990 lb. SWL
2000 lb. breaking strength
5/16" maximum line diameter
3/16" shackle pin diameter
3-3/8" long

Harken Part# 347

HARKEN 29MM TRIPLE BLOCK- BECKET, CAM CLEAT

Harken 51mm Wire Block-Becket

Murrays Part# 28-0314

The Harken 51 mm Wire Block - Becket is Lightweight, low-friction wire blocks carry wire halyards and high-strength control lines on boats of all sizes.

HARKEN 51MM WIRE BLOCK-BECKET

Harken 38mm Wire Through-Deck

Murrays 28-0306

Lightweight, low-friction wire blocks carry wire halyards and high-strength control lines on boats of all sizes.

Harken Part# 306

HARKEN 38MM WIRE THOUGH-DECK

Harken 22mm Triple Becket Block-Cam Cleat

Murrays Part# 28-0231

Harken ball bearing micro triple block with becket and cam has free-rolling Delrin® ball bearings. Sheaves are UV-stabilized with carbon-black additive for maximum protection. Stainless steel side plates give strength. Harken's low-friction micro blocks are compact and lightweight, with fast trim and release under high or low loads.

HARKEN 22MM TRIPLE BECKET BLOCK-CAM CLEAT

Harken 29mm Wire Bullet Block-Swivel

Murrays Part# 28-0183

Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control lines applications. ire Bullet blocks use roller bearings to carry higher loads and feature hardcoat-anodized PTFE impregnated aluminum sheaves for strength and corrosion resistance.

HARKEN 29MM WIRE BULLET BLOCK-SWIVEL

Harken 38mm Big Bullet Block-Swivel

Murrays Part# 28-0168

Low-friction bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads.

Harken's big single bullet block with swivel has free-rolling Delrin® ball bearings. Sheave and sideplates are UV-stabilized with carbon-black additive for maximum protection.

HARKEN 38MM BIG BULLET BLOCK-SWIVEL

Harken Standard Furling Drum-3mm Luff Wire

Murrays Part# 28-0165

Harken's high load drum features multiple stacked races of bearings to ensure smooth rotation under load.

HARKEN STANDARD FURLING DRUM-3MM LUFF WIRE

Harken Standard Furling Swivel-3mm Luff Wire

Murrays Part# 28-0164

One of the simplest, strongest and least expensive roller furling swivels for roller furling jibs. SWL of 950 lbs.; distance between pins is 2-1/2".

Harken Part# 164

HARKEN STANDARD FURLING SWIVEL-3MM LUFF WIRE

HARKEN 38MM BIG BULLET BLOCK-BECKET

Waterproof Sports Bag Lightweight 60L by Magic Marine

WATERPROOF SPORTS BAG LIGHTWEIGHT 60L

Harken 29mm Wire Bullet Block

Murrays Part# 28-0098

Low-friction bullet blocks lead control lines aft. This block is compact and lightweight, with fast trim and release under high or low loads. Free-rolling Delrin® ball bearings, sheave and sideplates are UV-stabilized with carbon-black additive for maximum protection. This wire bullet block uses roller bearings to carry higher loads and features Hardkote-anodized Teflon®-impregnated aluminum sheaves for strength and corrosion resistance.

HARKEN 29MM WIRE BULLET BLOCK

Harken 29mm Double Bullet Block-Becket

Murrays Part# 28-0085

Medium-size Harken double bullet block with becket has Delrin ball bearings and works well for control line or jib sheeting lines. The low-friction bullet block is compact and lightweight, with fast trim and release under high or low loads. Free-rolling Delrin® ball bearings. Sheave and sideplates are UV-stabilized with carbon-black additive for maximum protection.

HARKEN 29MM DOUBLE BULLET BLOCK-BECKET

Harken 3.00" Hexaratchet® Block-Swivel, Starboard

Murrays Part# 28-0009

Hexaratchets grip loaded sheets, yet allows sailors to ease and trim quickly and with complete control. A switch on the side engages and disengages the ratchet mechanism. Use the 043 or 044 revers ratchets with the 019 and 009 singles or 050 single with becket on spinnaker and jib sheets where ratchets rotate in opposite directions and on/off switches face up.

HARKEN 3.00" HEXARATCHT BLOCK-SWIVEL, STARBOARD

Harken Block Double with Becket 2.25"

Harken PN 004

Sheave Size 57mm 2.25 Inches

Max Line Size 12MM  7/16"

Max Working Load 454kg  1000lb

Breaking Load 1361kg 3000lb

The 2.25 in (57mm) blocks are compact and lightweight, with fast trim and release under high or low loads. Perfect for dinghies, scows, beachcats and iceboats, as well as small offshore racers and cruisers.

HARKEN 2.25" BLOCK DOUBLE WITH BECKET

HARKEN 2.25" BLOCK DOUBLE

Snap Hook #1 (Bronze)

Murrays Part# 27-3461

Die cast manganese bronze snap hook measures 2-7/8" overall with 11/16" diameter hole and 1/4" opening. Weight: .05 lb.

SNAP HOOK #1 (BRONZE)

Clamcleat Auto-Release Racing Mini

Murrays Part# 27-0257

The Clamcleat® Auto-Release cleat provides the neatest and best solution to the problem of how to lock-down a rudder blade, yet allow it to flip-up if it hits the bottom or a solid obstacle in the water. The cleat holds ropes securely, but will release them immediately when the cleat is overloaded. Once tripped, it can be easily reset in seconds by just pushing the cleat back down into its base.

CLAMCLEAT AUTO-RELEASE RACING MINI CLEAT

FIDDLE BLOCK W/CLEAT BECKET

Use this economical medium fiddle block with swivel for boom vangs and righting aids.

3/16 to 3/8" line capacity.

FIDDLE BLOCK WITH CLEAT & BECKET

Hobie 16 Spinnaker Kit Bag

H-16 SPINNAKER BAG KIT

NACRA F16 LINE PACKAGE

Harken 22mm Block-Swivel

Murrays Part# 28-0292

Low Friction Micro Blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies and lightly loaded control lines on boats of all sizes.

HARKEN 22MM BLOCK-SWIVEL

NACRA F18INF BOOM

FORWARD WIP TOP - SMALL

Harken Fairlead for Roller Furling Drum

Murrays Part# 25-1066

A fairlead directs line to coil evenly on a roller furling drum, reducing snagging and increasing drum line capacity.

HARKEN FAIRLEAD FOR ROLLER FURLING DRUM

Large Fairlead: 1-7/16 X 5/8"

Murrays Part# 25-1065

Large stainless steel fairlead is used on Hobie® rear crossbar.

Measurements:

A = 1-7/16" (36.5mm)
B = 5/8" (16mm)
C = 3/16" (5mm)

Use two 6-4 rivets (#19-5031) for installation.

LARGE FAIRLEAD: 1-7/16 X 5/8"

Folding Anchor 3.5 LB

Murrays Part# 24-2311

Collapsible anchor is constructed of corrosion-resistant galvanized iron and conveniently fits through a 4" port hole. Weighs 3.5 lb.

WEST MARINE FOLDING ANCHOR 3.5 LB

1/4" Short Halyard Shackle

Murrays Part# 22-9343

1-7/32" long with fixed guard pin and spring-loaded 1/4" captive pin. Maximum working load is 1550 lbs.

1/4" SHORT HALYARD SHACKLE

Schaefer Marine

Ronstan shock block Part # RF8080 5mm

RONSTAN SMALL SHOCK 3/16"

Ronstan Series 55 Orbit Block™, Ratchet

Murrays Part# 21-56100

Now you can enjoy the flexibility of setting up your ratchet blocks to suit yourself. Ronstan is the only company that offers a ratchet block with both auto and manual engagement modes. In the auto mode of the ratchet mechanism engages when load is applied, but switches off when it's released. This lets the sheet run out smoothly and freely-great for rapid easing of the sheet and for gybing asymmetric spinnakers.

RONSTAN SERIES 55 ORBIT BLOCK, RATCHET

Ronstan Stainless Thimble for 6mm (1/4") Wire

Murrays Part# 21-0486

Ronstan thimble for 1/4" wire is constructed of grade 316 stainless steel.

RONSTAN STAINLESS STEEL THIMBLE FOR 6MM (1/4") WIRE

PHMS #6-32 X 7/8 (Brass)
Murrays Part# 19-290
Brass, pan head #6-32 x 7/8" machine screw.

SCREW PHMS #6-32 X 7/8" (BRASS)

Bolt Hex Head 3/8-16 X 2.5" (Stainless Steel)

Murrays Part# 19-2239

Stainless hex head bolt is used on Nacra and Prindle crossbar.

BOLT HEX HEAD 3/8-16 X 2.5" (SS)

Screw FHSMS #12 X 3/4 Stainless Steel
Murrays Part# 19-1625
Flat head, self-tapping, stainless steel #13 x 3/4" sheet metal screw.

SCREW FHSMS #12 X 3/4" (SS)

Screw PHSMS #8 X 1.50" (Stainless Steel)

Murrays Part# 19-1623

Stainless steel, pan head, self-tapping, #8 x 1.5" sheet metal screw

SCREW PHSMS #8 X 1.50" (SS)

Screw FHSMS #8 X 1.50 Stainless Steel

Murrays Part# 19-1622

Flat head, self-tapping, #8 x 1.5" stainless steel sheet metal screw is used to mount Harken Micro Cam-Matic cleats (need 2).

SCREW FHSMS #8 X 1.50" (SS)

Screw PHSMS #8 X 1"
(Stainless Steel)

Murrays Part# 19-1619

Pan head, self-tapping, stainless steel #8 x 1" sheet metal screw

SCREW PHSMS #8 X 1" (SS)

Previous 1 … 49 50 51 52 53 … 57 Next

Recently viewed

All Sailing Parts