All Sailing Parts

2215 products

    Everything Nacra, Prindle, Hobie and a few more fun odds and ends.

    2215 products
    Out of Stock
    SAIL SUNFISH 3.9OZ CUSTOM*
    Murrays Sports
    Getaway Mainsail (White) Murrays Part# 30-6005
    PRINDLE 19 6OZ DACRON JIB SAIL (WHITE)
    Murrays Sports
    Out of Stock
    Getaway Mainsail (White) Murrays Part# 30-6005
    H-21SE 6OZ DACRON JIB SAIL (WHITE)
    Murrays Sports
    Out of Stock
    Getaway Mainsail (White) Murrays Part# 30-6005
    H-21SC 60Z DACRON JIB SAIL (WHITE)
    Murrays Sports
    Out of Stock
    H14 Roller Furling Jib Sail (White) Murrays Part# 30-5012 A roller furling jib adds safety, convenience and performance to your Hobie 14. Reduce sail area while sailing or furl your jib while beached. Dacron sailcloth in your choice of weight and solid colors; 4-oz. cloth offers a greater selection of colors than 6-oz. Viewing window is not included (order #30-5001). Order hardware kit #30-5015 separately.
    H-20 JIB SAIL (WHITE)
    Murrays Sports
    Out of Stock
    Getaway Mainsail (White) Murrays Part# 30-6005
    H-17 SPORT JIB SAIL (WHITE)
    Murrays Sports
    Out of Stock
    H-17 SUPER ROLLER FURLING JIB RIG KIT
    Murrays Sports
    Out of Stock
    Getaway Mainsail (White) Murrays Part# 30-6005
    WAVE MAINSAIL (WHITE)
    Murrays Sports
    Out of Stock
    BRISTLE BRUSH 1"
    Misc
    NACRA F18 INFUSION MKII-BLACK
    NACRA
    H18 1-Piece Bias Cut Trampoline-Black Murrays Part# 30-3103-2 This one-piece, bias-cut, black mesh tramp for Hobie® 18 provides a smooth, uncomplicated deck and includes an 11"x12" pocket and adjustable hiking straps. Polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won't be sitting in a puddle. Two-year warranty on workmanship and materials.
    DART 18 MESH TRAMPOLINE-BLACK
    Murrays Sports
    Harken Ball Bearing Delrin 1/8" Murrays Part#  28-HSB243 Harken 1/8" replacement Delrin ball bearings are sold individually.
    HARKEN BALL BEARING DELRIN 1/8" (EACH)
    Harken
    Harken Infusion Yard Cover Murrays Part# 28-8591 Both hulls and tramp covered while assembled. Covers sailboat hulls and tramp. area for drainage. Zippers and hook-and-loop for easy installation. Secure to trailer with web straps and buckles. Not meant for travel.
    HARKEN INFUSION YARD COVER
    Harken
    Harken 57mm Triple Ratchet Block-Swivel, 40 mm Side Carbos, Cam Cleat Murrays Part# 28-8454 Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing.
    HARKEN 57MM TRIPLE RATCHET BLOCK-SWIVEL, 40MM SIDE CARBOS, CAM CLEAT
    Harken
    Harken Fairlead Spacer F18 Murrays Part# 28-4022 Mounted on a mainsheet base block, this plastic spacer provides a smooth surface to guide the line for the fairlead. Sold individually
    HARKEN F18 FAIRLEAD SPACER
    Harken
    Harken 57mm 5-Sheave Block-Swivel Murays Part# 28-2762 Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to our popular Harken Big Boat blocks, these small, compact blocks have very high working loads for safe, easy trimming.
    HARKEN 57MM 5-SHEAVE BLOCK-SWIVEL
    Harken
    Harken 22mm High-Load 1250 Car-Fixed Sheaves, Eyestrap Murrays Part# 28-2736 Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit.
    HARKEN 22MM HIGH-LOAD 1250 CAR-FIXED SHEAVES, EYESTRAP
    Harken
    Harken 22mm Low-Load Loop Car Murrays Part# 28-2732 Harken's small boat CB jib car for Ti-lite is 2-7/8" long and 2-1/4" wide. The card body height is 15/16"; weighs 4 oz.; 500 lb. maximum working load; 2500 lb. breaking load. Note: This track is compatible only with Harken low-profile traveler cars (#28-2732, #28-2736 and #28-2738). Harken Part# 2732
    HARKEN 22MM LOW-LOAD LOOP CAR
    Harken
    Out of Stock
    Harken 22mm Low-Beam Trim Caps Murrays Part# 28-2722 Trim caps finish track ends for end control assemblies. Use with Harken 22mm low-beam track. Harken Part# 2722
    HARKEN 22MM LOW-BEAM TRIM CAPS
    Harken
    Harken 22mm High-Beam Track Murrays Part# 28-2725-120 Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface.
    HARKEN 22MM HIGH-BEAM TRACK
    Harken
    Harken 75mm Triple Ratchamatic Block-Swivel, Becket, Cam Cleat, 57mm Block Murrays Part# 28-2687 The Carbo Ratchamatic® is a load-sensing ratchet block that rolls freely in both directions under low loads and automatically engages the ratchet as loads increase. Shifting between ratchet and light-air modes is seamless.
    HARKEN 75MM TRIPLE RATCHAMATIC BLOCK-SWIVEL, BECKET, CAM CLEAT, 57MM BLOCK
    Harken
    Harken 40mm Fiddle Block -Swivel, Cam Cleat Murrays Part# 28-2657 Harken's Carbo fiddle block features high-load ball bearings with fitted races for low-friction operation. The 40 mm fiddle is an excellent choice for a Hobie® 20 barber hauler block, for 3:1 and 4:1 tackles on dinghy vangs and mainsheets, as well as for controls such as cunninghams and internal boom outhauls on larger boats.
    HARKEN 40MM FIDDLE BLOCK- SWIVEL, CAM CLEAT
    Harken
    Harken 40mm 90° Block Murrays Part# 28-2659 Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to our popular Harken Big Boat blocks, these small, compact blocks have very high working loads for safe, easy trimming. Harken Part# 2659
    HARKEN 40MM 90° BLOCK
    Harken
    Harken 40mm Quad Block Murrays Part# 28-2654 Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to our popular Harken Big Boat blocks, these small, compact blocks have very high working loads for safe, easy trimming.
    HARKEN 40MM QUAD BLOCK
    Harken
    Harken Cam Arm Cover Left 57mm with Nut Murrays Part# 28-2653 One Harken replacement right or left 57mm side cover washer for #28-2629 Carbo Ratchamatic base block. #28-2652 Right cam arm washer 57mm is Harken #H-26521B. #28-2653 Left cam arm cover 57mm with nut is Harken #HSB524.
    HARKEN CAM ARM COVER LEFT 57MM WITH NUT
    Harken
    Harken 57mm Double Ratchamatic Block-Swivel Murrays Part# 28-2634 The 57mm Harken Carbo Ratchamatic® is a load-sensing ratchet block that rolls freely in both directions under low loads and automatically engages the ratchet as loads increase. Shifting between ratchet and light-air modes is seamless.
    HARKEN 57MM DOUBLE RATCHAMATIC BLOCK-SWIVEL
    Harken
    Harken 57mm Triple Ratchamatic® Block-Swivel, Cam Cleat, 40 mm Block Murrays Part# 28-2632 The Harken Carbo Ratchmatic® is a load-sensing ratchet block that rolls freely in both directions under low loads, and automatically engages the ratchet as loads increase. Shifting between ratchet and light air modes is seamless. Unloaded, the sheet runs freely during mark roundings and jibes. Ratchet engagement may be adjusted to a higher or lower load according to strength and sailing style.
    HARKEN 57MM TRIPLE RATCHAMATIC BLOCK-SWIVEL, CAM CLEAT, 40MM BLOCK
    Harken
    Harken 57mm Quad Block-Swivel Murrays Part# 28-2631 57mm Carbo Blocks have an enormous working range and a very high strength-to-weight ratio. Use with #28-2632 base block for an 8:1 Carbo low-profile mainsheet system.
    HARKEN 57MM QUAD BLOCK-SWIVEL
    Harken
    Harken 7:1 Carbo Ratchamatic Base Block. Harken HSB360
    HARKEN BLOCK 7:1 CARBO RATCHAMATIC BASE
    Harken
    Harken 57mm Triple Block-Swivel, Becket Murrays Part# 28-2605 This Carbo AirBlock® has an enormous working range, with a higher working load than standard blocks, even though it is lighter in weight! This is a fantastic option for the top block for a 7:1 mainsheet system, such as an Hobie 18 catamaran or Hobie Miracle 20 catamaran.
    HARKEN 57MM TRIPLE BLOCK-SWIVEL, BECKET
    Harken
    Harken 57mm Block-Swivel Murrays Part# 28-2600 The Harken 57mm Carbo Block with Swivel is a low-friction Carbo Air block that is lightweight, strong, reliable—and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming. They can be used to replace the single Seaway blocks on a Hobie mainsheet system. Ideal for 8-10m lines, common on many classes of dingy and small catamarans.
    HARKEN 57MM BLOCK-SWIVEL
    Harken
    Harken 29mm Fly Block Murrays Part# 28-2171 These blocks are the standard upgrade for F18 and other Spinnaker Beachcats that have suffered from halyard block failure.  The 29mm Fly Block Single- Harken soft-attach Fly blocks are designed to provide strength without mass, providing sailors with big power in a low-aero package. Designed specifically for high-tech line, these efficient blocks have an incredible working load for their small size.
    HARKEN 29MM FLY BLOCK
    Harken
    Harken Block 57mm T2 Soft-Attach Ratchet Block for catamarans, this tie-on block eliminates the need for shackles, posts, swivels, etc. It is ultra-lightweight and sized like a bullet-block. Specifications: 2-1/4" sheave diameter 500 lb. SWL 2000 lb. breaking strength 3/8" maximum line diameter Harken Part # 2160
    HARKEN 57MM T2 SOFT-ATTACH RATCHAMATIC BLOCK
    Harken
    Harken 40mm T2 Soft-Attach Ratchamatic Block Murrays Part# 28-2159 Harken Block 40mm T2 Soft-Attach Ratchet Block for catamarans, this tie-on block eliminates the need for shackles, posts, swivels, etc. It is ultra-lightweight and sized like a bullet-block.
    HARKEN 40MM T2 SOFT-ATTACH RATCHAMATIC BLOCK
    Harken
    Harken 57mm Carbo Boom Block 6-Sheave Murrays Part# 28-10925 Harken 57mm Carbo Blocks have an enormous working range and a very high strength-to-weight ratio. This 57mm Carbo boom block has 6 sheaves. A swivel keeps the boom block aligned with your base block.
    HARKEN 57MM CARBO BOOM BLOCK 6-SHEAVE
    Harken
    Harken Standard X-Treme Angle Fairlead Murrays Part# 28-0150 The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degrees to the cleat. fits #28-0468 Micro Cam-Matic Aluminum and 28-0471 Micro Carbo Cam. Specifications: 7/8" height above cam; 1-7/16" high; 1-5/16" long; 2" wide; weighs 1 oz.; 1-1/16" fastener spacing. Harken Part# 375
    HARKEN STANDARD X-TREME ANGLE FAIRLEAD
    Harken
    Harken 16mm Block-Swivel Murrays Part# 28-0417 The Harken air block offers a very high load in an extremely lightweight block. The block itself is only 1-13/16" long. The 5/8" sheave will accept line as large as 7/32". 250 lb. SWL; 750 lb. breaking strength; 5/32" shackle pin diameter. Harken Part# 417
    HARKEN 16MM BLOCK-SWIVEL
    Harken
    Harken 16mm Cheek Block Murrays Part# 28-0416 Harken's 16mm check block is a downhaul and turning block and is perfect for small synthetic control lines. 1-13/16" long; 5/8" sheave diameter; 250 lb. SWL; 1200 lb. breaking strength. Use #8 (4mm) RH fasteners. Harken Part# 416
    HARKEN 16MM CHEEK BLOCK
    Harken
    Harken 16mm Triple Block Murrays Part# 28-0408 The Harken air block offers a very high load in an extremely lightweight block. The block is only 1-13/16" long. The 5/8" sheave will accept line as large as 7/32". 700 lb. SWL; 1200 lb. breaking strength.  Harken Part# 408
    HARKEN 16MM TRIPLE BLOCK
    Harken
    Harken 16mm Double Block Murrays Part# 28-0406 The Harken air block offers a very high load in an extremely lightweight block. Excellent for control lines. The block itself is only 1-1/8" long; overall length is 1-11/16. The 5/8" sheave will accept line as large as 7/32". 450 lb. SWL; 1200 lb. breaking strength. The 16 mm is Harken’s® smallest block. It is perfect for small synthetic control lines found on high-tech dinghies.
    HARKEN 16MM DOUBLE BLOCK
    Harken
    Recently viewed