All Sailing Parts

2199 products

    Everything Nacra, Prindle, Hobie and a few more fun odds and ends.

    2199 products
    FORWARD WIP TOP
    Forward Wip
    Harken Fairlead for Roller Furling Drum Murrays Part# 25-1066 A fairlead directs line to coil evenly on a roller furling drum, reducing snagging and increasing drum line capacity.
    HARKEN FAIRLEAD FOR ROLLER FURLING DRUM
    Harken
    Large Fairlead: 1-7/16 X 5/8" Murrays Part# 25-1065 Large stainless steel fairlead is used on Hobie® rear crossbar. Measurements: A = 1-7/16" (36.5mm) B = 5/8" (16mm) C = 3/16" (5mm) Use two 6-4 rivets (#19-5031) for installation.
    LARGE FAIRLEAD: 1-7/16 X 5/8"
    Ronstan
    SERIES 19 JIB SHEET & TRAVELER UPGRADE
    Murrays Sports
    Folding Anchor 3.5 LB Murrays Part# 24-2311 Collapsible anchor is constructed of corrosion-resistant galvanized iron and conveniently fits through a 4" port hole. Weighs 3.5 lb.
    WEST MARINE FOLDING ANCHOR 3.5 LB
    West Marine
    1/4" Short Halyard Shackle Murrays Part# 22-9343 1-7/32" long with fixed guard pin and spring-loaded 1/4" captive pin. Maximum working load is 1550 lbs.
    1/4" SHORT HALYARD SHACKLE
    Schaefer Marine
    Single Wire Block With Shackle Murrays Part# 22-3302 This single wire block can be used to replace the jib halyard block on Nacra 5.2, Performance part 9896.
    SINGLE WIRE BLOCK WITH SHACKLE
    Schaefer Marine
    Ronstan shock block Part # RF8080 5mm
    RONSTAN SMALL SHOCK 3/16"
    Ronstan
    Ronstan Series 55 Orbit Block, Ratchet with Becket and Cam Cleat Murrays Part# 21-56130 The Ronstan Orbit 55 Jib Block Ratchet Orbit Block™ has the highest holding power available and is ideal as a jib sheet cleat for the Hobie® 18, Hobie® 20, etc. The automatic ratchet mechanism engages when load is applied, but switches off when it's released.
    RONSTAN SERIES 55 ORBIT BLOCK, RATCHET WITH BECKET AND CAM CLEAT
    Ronstan
    Ronstan Series 55 Orbit Block™, Ratchet Murrays Part# 21-56100 Now you can enjoy the flexibility of setting up your ratchet blocks to suit yourself. Ronstan is the only company that offers a ratchet block with both auto and manual engagement modes. In the auto mode of the ratchet mechanism engages when load is applied, but switches off when it's released. This lets the sheet run out smoothly and freely-great for rapid easing of the sheet and for gybing asymmetric spinnakers.
    RONSTAN SERIES 55 ORBIT BLOCK, RATCHET
    Ronstan
    Ronstan Series 30 Ball Bearing Orbit Block, Lashing Murrays Part# 21-35101 Ronstan ball bearing Orbit Blocks™ boast the highest strength-to-weight ratio available, achieved through all-composite reinforced polymer materials and multiple attachment options. Ultra low profile through-sheave becket. Use for jib clew block.
    RONSTAN SERIES 30 BALL BEARING ORBIT BLOCK, LASHING
    Ronstan
    DCORE 3MM
    AlphaRope
    D-Cup 78 KMIX 8mm Black/Grey Murrays Part# 39-4208bg Double braid. 12 strand, coated Dyneema® Sk78 core, 24 plait mix HT Polyester / Cordura® cover.
    D-CUP 78 KMIX 8MM
    AlphaRope
    Ronstan Stainless Thimble for 6mm (1/4") Wire Murrays Part# 21-0486 Ronstan thimble for 1/4" wire is constructed of grade 316 stainless steel.
    RONSTAN STAINLESS STEEL THIMBLE FOR 6MM (1/4") WIRE
    Ronstan
    Thimble 1/16-3/32 Stainless Steel Ronstan's #481 thimble is used on Hobie 18 jib halyard, shrouds, forestays and trapeze wires. Constructed of grade 304 stainless steel. Weight: .1 oz.
    RONSTAN STAINLESS THIMBLE FOR 2.5MM (3/32") WIRE
    Ronstan
    Screw PHMS #10-32 X 2" Stainless Steel Murrays Part# 19-2918 Stainless steel, #10-32 x 2" Phillips pan head machine screw. Mainsheet block replacement screw. Also used to mount Harken Cam-Matic cleats #28-0150 and #28-0365 (needs 2 screws).
    SCREW PHMS #10-32 X 2" (SS)
    Misc
    Screw PHMS #10-32 X 7/8" Stainless Steel Murrays Part# 19-2916 Stainless steel #10-32 x 7/8" machine screw has pan head with slot
    SCREW PHMS #10-32 X 7/8" (SS)
    Misc
    PHMS #6-32 X 7/8 (Brass) Murrays Part# 19-290 Brass, pan head #6-32 x 7/8" machine screw.
    SCREW PHMS #6-32 X 7/8" (BRASS)
    Misc
    Bolt Hex Head 3/8-16 X 2.5" (Stainless Steel) Murrays Part# 19-2239 Stainless hex head bolt is used on Nacra and Prindle crossbar.
    BOLT HEX HEAD 3/8-16 X 2.5" (SS)
    Misc
    Screw FHSMS #12 X 3/4 Stainless Steel Murrays Part# 19-1625 Flat head, self-tapping, stainless steel #13 x 3/4" sheet metal screw.
    SCREW FHSMS #12 X 3/4" (SS)
    Misc
    Screw PHSMS #8 X 1.50" (Stainless Steel) Murrays Part# 19-1623 Stainless steel, pan head, self-tapping, #8 x 1.5" sheet metal screw
    SCREW PHSMS #8 X 1.50" (SS)
    Misc
    Screw FHSMS #8 X 1.50 Stainless Steel Murrays Part# 19-1622 Flat head, self-tapping, #8 x 1.5" stainless steel sheet metal screw is used to mount Harken Micro Cam-Matic cleats (need 2).
    SCREW FHSMS #8 X 1.50" (SS)
    Misc
    Screw PHSMS #8 X 1" (Stainless Steel) Murrays Part# 19-1619 Pan head, self-tapping, stainless steel #8 x 1" sheet metal screw
    SCREW PHSMS #8 X 1" (SS)
    Misc
    Screw PHSMS #4 X 3/8 Stainless Steel Murrays Part# 19-1615 Stainless steel, pan head, self-tapping #4 x 3/8" sheet metal screw.
    SCREW PHSMS #4 X 3/8" (SS)
    Misc
    FHSMS #6 X 1/2 Stainless Steel Murrays Part# 19-1610 Flat head self-tapping #6 x 1/2" sheet metal screw can be used to attached lance cleats.
    SCREW FHSMS #6 X 1/2" (SS)
    Misc
    SAIL NUMBER 14" U-CUT BLACK
    Murrays Sports
    Tear-Aid A Roll (3"x30') Murrays part# 010-3310-1 Tear-Aid Type A is the best-known kite and sail repair tape and it works on all kite canopy / sail materials: Dacron, mylar and ripstop nylon and kite bladders. Each package includes one foot of clear repair tape, alcohol pad and instructions. To use, clean area to be repaired with alcohol, cut patch to size, then peel and stick.
    TEAR-AID A ROLL (3"x30')
    Tear-Aid
    Rigging Tape 1"X 15' White Murrays Part# 010-3460 Protects against chafing and sharp edges while providing safety for sails, lines and rope ends. This self-bonding tape is waterproof and leaves no sticky residue. 1" x 15 feet.
    RIGGING TAPE 1"X 15' WHITE
    Misc
    Jib Traveler Cars Integrated Murrays Part# 012-3021 These cars by Tren Tec fit Hobie's integrated jib track which is extruded into the crossbar, as opposed to the external track which is riveted to the crossbar (standard on pre-1997 Hobie® 16's). The black plastic cars have four holes and slide freely in the track. Low profile shape saves needed space when mast is raked to the extreme. Hobie Cat® uses #1553 for this item Sold as a pair
    JIB TRAVELER CARS INTEGRATED
    Tren-Tec
    Out of Stock
    CAT TRAX BEACHCAT DOLLY AXLE
    Cat Trax
    CAT TRAX T-HANDLE-HARDWARE INCLUDED
    Cat Trax
    CAT TRAX AXLE EXTENDER H-21 AND TORNADO
    Cat Trax
    HAND WINCH 3:1
    Misc
    Out of Stock
    Trailer Jack with Caster Murrays Part# 16-9510 The Fulton 1000-lb. swivel jack is ideal for light boats up to 18 feet.
    TRAILER JACK W/CASTER
    Misc
    Screw FHMS #8-32 X 3/8 (Stainless Steel) Murrays Part# 19-1515 Stainless steel flat head #8-32 x 3/8" machine screw
    SCREW FHMS #8-32 X 3/8" (SS)
    Misc
    Screw FHMS #8-32 X 3/4 Stainless Steel Murrays Part# 19-1516 Stainless steel flat head #8-32 x 3/4" machine screw.
    SCREW FHMS #8-32 X 3/4" (SS)
    Misc
    Screw FHMS #8-32 X 1"Stainless Steel Murrays Part# 19-1517 Stainless steel #8-32 x 1" flat head screw can be used for port installation. Compare to Hobie Cat® Part# 8031231
    SCREW FHMS #8-32 X 1" (SS)
    Misc
    Screw FHMS #10-32 X 1.00 Stainless Steel Murrays Part# 19-1518
    SCREW FHMS #10-32 X 1.00" (SS)
    Misc
    Out of Stock
    Hobie Deluxe Sail Bag
    HOBIE DELUXE SAIL BAG
    Hobie
    Out of Stock
    HOBIE DOWNHAUL SCALE - 2082 Can you ever remember where the downhaul was set that day you “smoked” everyone. This handy stick on scale takes the guess work out of setting the downhaul.
    HOBIE DOWNHAUL SCALE
    Hobie
    Recently viewed