All Sailing Parts

2213 products

    Everything Nacra, Prindle, Hobie and a few more fun odds and ends.

    2213 products
    Out of Stock
    Nut Nylock 3/8-24 Murrays Part# 50-8050511 Replacement 3/8-24 nylock nut is used on Hobie® 14, 16 and 18 dolphin striker rods, as well as Hobie® 17 inboard support. Hobie Part# 8050511
    NUT NYLOCK 3/8-24"
    Hobie
    Nut 10-32 Nylock Low Profile Murrays Part# 50-8050211 Hobie factory low-profile Nylock 10-32 nut as used on EZ-Loc rudder assembly. Hobie Part# 8050211
    NUT 10-32 NYLOCK LOW PROFILE
    Hobie
    Out of Stock
    Prindle 15/16/18 mast step casting
    PRINDLE 15/16/18 MAST STEP CASTING
    Misc
    H17/18 Mast Seal Plate Murrays Part# 50-61080000 Replacement mast seal plate for the Hobie 17 or Hobie 18.  Hobie Part# 61080000
    H-17/18 MAST SEAL PLATE
    Hobie
    Out of Stock
    H17/20/Tiger Mast Base Murrays Part# 50-50416011 Hobie® factory replacement black mast base for Hobie® 17, 20 or Tiger. Use two 6-6 rivets (#19-5032) for installation.
    H-17/20/TIGER MAST BASE
    Hobie
    Out of Stock
    Jib Car Stop (Integrated Track) Murrays Part# 50-25231051 Hobie® factory replacement jib car stop for Hobie 16's with integrated track (1995 and later). Hobie Part# 25231051
    JIB CAR STOP (INTEGRATED TRACK)
    Hobie
    Getaway EZ Loc Tiller Crossbar Murrays Part# 50-37524001 Newest 4th edition Hobie Getaway crossbar.
    GETAWAY EZ LOC TILLER CROSSBAR
    Hobie
    Out of Stock
    H18 Comptip Assembly Murrays Part# 50-60611100 Hobie® factory Hobie 18 CompTip Assembly for Hobie 18 mast. A CompTip is the upper section of Hobie mast built in or after 1968. Fiberglass and non-conductive, it is designed to prevent electrocution by contact with a high power line.
    H-18 COMPTIP ASSEMBLY
    Hobie
    Out of Stock
    H20/21/ Super Cruiser Shroud Tang Murrays Part# 50-30690001
    H-20/21/SC SHROUD TANG
    Hobie
    Out of Stock
    H18 Mesh Trampoline-Black Murrays Part# 50-60970055 The gold standard for Hobie 18 trampolines, this black mesh trampoline features a heavy duty fabric, pockets, and reinforced grommets. Hobie Part# 60970055
    H-18 MESH TRAMPOLINE-BLACK
    Hobie
    H16 Forward Crossbar with Mast Step Murrays Part# 50-25131910 This is the current production front Crossbar for a Hobie 16. It includes the integrated traveler track and the updated mast step. Hobie® factory replacement forward crossbar for 1994 or later Hobie 16's with integrated track. Hobie Part# 25131910
    H-16 FROWARD CROSSBAR WITH MAST STEP
    Hobie
    H18/20 Gooseneck Yoke Murrays Part# 50-60710000 Hobie® factory replacement gooseneck yoke for Hobie 18 and 20. Hobie Part# 60710000
    H-18/20 GOOSENECK YOKE
    Hobie
    GETAWAY MAST HEAD SHEAVE Replacement Hobie Getaway mast head sheave. Hobie part number 37611001
    GETAWAY MASTHEAD SHEAVE
    Hobie
    Out of Stock
    H16 E-Clip Gooseneck Murrays Part# 50-8062521 Hobie® factory replacement E-clip for gooseneck on Hobie® 16. The E-clip fits old-style boom pin that is grooved. Hobie Part# 8062521
    H-16 E-CLIP GOOSENECK
    Hobie
    HOBIE 20 DOWNHAUL SHEAVE - 40700541 Hobie factory replacement downhaul sheave for Hobie® 20 mast. UV-stabilized.   SPECS: 1/2" wide by 1 5/32" diameter, 1/4' hole.
    H-20 DOWNHAUL SHEAVE
    Hobie
    PRINDLE 15, 16, 18 DOLPHIN STRIKER ROD
    NACRA
    H18 Diamond Spreader Tang Murrays Part# 50-61410000 Hobie® factory replacement diamond spreader tang for Hobie® 18.
    H-18 DIAMOND SPREADER TANG
    Hobie
    Comp-Tip Mast Head Sheave for H16 Wave Murrays Part# 50-20614210 CompTip Mast Head Sheave for Hobie 16 or Wave, is the sheave found at the top of the comptip assembly. Two sheaves are used in each assembly. The sheaves each ride on a, comptip sheave spacer. The sheave is 9/16" wide x 2 1/4" diameter with 3/8" hole. The larger sheave for the obsolete mast head for all-aluminum mast is no longer available. Hobie Part number 20614210
    H-16/WAVE COMP-TIP MAST HEAD SHEAVE
    Hobie
    Chain Plate "Turbo" Murrays Part# 50-10300000 Hobie® factory replacement chain plate for Hobie® 14 Turbo. Use three 6-4 rivets (#19-5031) for installation.
    H-14 CHAIN PLATE "TURBO"
    Hobie
    Bow Tang Murrays Part# 56-1810 Bow tang for Prindle 15, 16, 18 and Escape Nacra Sailing factory item# 30386
    PRINDLE/ESCAPE BOW TANG
    NACRA
    H18 Boom Outhaul Car Assembly Murrays Part# 50-60220001 Hobie® factory replacement outhaul car assembly for Hobie® 18. Outhaul and shock cord are not included. For outhaul line, order 7' of 3/16" black line #39-2311BK. For outhaul shock cord, order 7' of #39-7491 black 1/4" shock cord.
    H-18 BOOM OUTHAUL CAR ASSEMBLY
    Hobie
    Out of Stock
    Boom End Cap H18 Forward Murrays part# 50-60751010 Hobie® factory replacement forward end cap for Hobie 18 boom.
    H-18 FORWARD BOOM END CAP
    Hobie
    Out of Stock
    Boom End Cap H14/16 Forward Murrays Part# 50-10740011 Hobie® factory replacement end cap for the forward end of Hobie® 14 or 16 boom. Also for Hobie® 21SC. Use three #19-5032 6-6 rivets for installation.
    H-14/16 FORWARD BOOM END CAP
    Hobie
    H14/16 Boom End Cap AFT Murrays Part# 50-10741031 Replacement rear boom end cap for Hobie® 14 or 16. Use two 6-6 rivets (#19-5032) for installation. Hobie® Part# 10741031
    H14/16 AFT BOOM END CAP
    Hobie
    Out of Stock
    Bolt Socket Head 3/8-16 X 3.75" Murrays Part# 50-8040561 Hobie® factory replacement 3/8-16 x 3.75" socket head bolt. Applications: Hobie 18 inboard front crossbar
    BOLT SOC HEAD 3/8-16 X 3.75"
    Misc
    Bolt Socket Head 3/8-16 X 2.50" Murrays part# 50-8040521 Hobie® factory replacement 3/8-16 x 2.50" socket head bolt is used on Getaway wing and Hobie® 18 rear inboard support. Hobie Part# 8040521
    BOLT 3/8-16 X 2.50"
    Hobie
    Bolt 5/16-18 X 2" Murrays Part# 50-8040331 Replacement 5/16-18 x 2" bolt is used as a rudder bolt on Hobie® Pre-EZ Lock Rudder System. Hobie Part# 8040331
    BOLT 5/16-18 X 2"
    Misc
    Bolt 3/8-16 X 5" 50-8040061 Hobie® factory 3/8-16 x 5" bolt is used on Hobie 20 Miracle front crossbar. Hobie Part# 8040061
    BOLT 3/8-16 X 5"
    Hobie
    Bolt 3/8-16 X 2" Murrays Part# 50-8040501 Replacement stainless steel 3/8-16 x 2" bolt is used on Hobie® 18 front and rear crossbars. Hobie Part# 8040501
    BOLT 3/8-16 X 2"
    Hobie
    H18 Jib Furler Bearing (Race) Murrays Part# 50-61920000 Hobie® factory replacement bearing race for Hobie roller furler drum. Hobie Part# 61920000
    H-18 JIB FURLER BEARING (RACE)
    Hobie
    Out of Stock
    Backrest End Cap Left Front Right Rear Getaway Murrays Part# 50-37660031 Hobie® factory replacement end cap casting for Getaway backrest. Left front/right rear
    GETAWAY WIND END CAP-FRONT LEFT, REAR RIGHT
    Hobie
    Tracker Sheave Spacer Murrays Part# 007-1052 The standard replacement sheave spacer for the traveler on all Hobie® 14, 16 and newer 17's. Sold Individually Hobie Cat® Part# 11860000.
    TRACKER SHEAVE SPACER (EA)
    Hobie
    Out of Stock
    Tracker Car Complete (Pre-1994) Murrays Part# 007-1050 This tracker car is the standard replacement part for all 1993 and earlier Hobie® 14, 16 and 17 main tracker traveler assemblies. Includes 2-3 rivets where required. Hobie Cat® factory item #105.
    TRACKER CAR COMPLETE (PRE'94)
    Hobie
    Thimble 3/32" - 1/8" Stainless Steel Stainless Steel Light Duty Wire Rope Thimbles are designed to provide basic reinforcement and protection for wire rope loops in low-load applications. Light-duty thimbles are more compact and are used in situations where the rope is not subjected to extreme tension or heavy stress. Their purpose is to prevent wire rope loops from fraying, deforming, or wearing at the contact point, while maintaining the shape and integrity of the loop. Stainless Steel Light Duty W
    THIMBLE 3/32" - 1/8" (SS)
    Misc
    Heavy Duty Swivel with Aluminum Cam Roller Fairlead Murrays Part# 25-3020 Swivel cam cleats are ideal for main traveler control and up-release jib cleating systems. This is a Murrays product that features an Aluminum Harken 150 cam cleat, and HD swivel plate and a HD roller fairlead. The advantage to the roller fairlead is that it can take a larger line diameter, up to 1/2", and handle heavy loads at extreme angles. Making it ideal for larger catamarans and sailors in high wind areas.
    ROLLER FAIRLEAD KIT (SWIVEL)
    Murrays Sports
    Nicopress Oval 1/16" Copper/Zinc Murrays Part# 002-1020 Nicopress Oval- Locks wire rope to a thimble terminal. Close with an appropriate swaging tool for maximum strength. Each.
    NICOPRESS OVAL 1/16" COPPER/ZINC
    Misc
    Out of Stock
    WAVE/GETAWAY TILLER CONNECTION KIT
    Hobie
    Harken Block Double Micro Murrays Part# 28-0226 Harken ball bearing micro double block with stainless side plates. Low-friction Micro blocks are compact and lightweight, making them ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats of all sizes. Specifications: 1/4" maximum line capacity 350 lb. SWL 1200 lb. breaking strength 2" long Harken Part# 226 Hobie Part# H226S
    HARKEN BLOCK DOUBLE MICRO
    Harken
    Clamcleat with Top Roller (Aluminum) Murrays Part# 27-0236 Replace old, worn-out outhaul and downhaul Clamcleats®. Aluminum cleats are stronger than nylon and have increased wear resistance. Easy to mount. Line capacity is 1/8"-1/4".
    CLAMCLEAT WITH TOP ROLLER (ALUMINUM)
    Clamcleat
    Sale
    FORWARD WIP 3/4" PANT - SMALL
    Forward Wip
    Save $40.95
    Recently viewed