All Sailing Parts

2213 products

    Everything Nacra, Prindle, Hobie and a few more fun odds and ends.

    2213 products
    Out of Stock
    Hobie Getaway EZ Loc Tiller Arm Murrays Part# 50-37382011 Replacement tiller arm for Hobie Getaway sailboat with EZ Loc style rudders. Hobie Part# 37382011
    HOBIE GETAWAY EZ LOC TILLER ARM
    Hobie
    Screw 3/8-16 x 4" PHMS-P Murrays Part# 50-8040600 This screw is for holding the wing side leg brace. Hobie Part# 8040600
    SCREW 3/8-16 x 4" PHMS-P
    Hobie
    Screw #10 x 1/2 PHSMS-P Murrays Part# 50-8031151 Hobie Part# 8031151
    SCREW #10X1/2" PHSMS-P
    Hobie
    Hobie Getaway Wing Leg Bracket Murrays Part# 50-37661050 Trampoline wing leg bracket for Hobie Getaway. Hobie Part# 37661050
    GETAWAY WING LEG BRACKET
    Hobie
    2mm Orion 500 Line Murrays Part# 39-2302BK Robline's 2mm Orion 500 Line is a 16-plait polyester cover and its 8-plait core provide for good grip and make the rope easy to splice. The ideal choice for all cruising enthusiasts. Features Versatile, easily handled and easily spliced polyester double braid is ideal for use as control lines, lashing and dozens of other uses aboard. Best Use: Control lines, tie downs and general lashing Construction: Double braid Cover Fiber/Construction: 16-plait
    ROBLINE 2mm ORION 500 CONTROL LINE
    Robline
    H-16 1-PIECE BIAS CUT MESH TRAMPOLINE-BLACK
    Murrays Sports
    Bolt Allen Head 5/16 18 X 1.5" (Stainless Steel) Murrays Part# 19-2229S Bolt Allen Head 5/16 - 18 X 1.5 (Stainless Steel) - replace hex head bolts used on Hobie 16, 17, 18, 20 Upper adjustable rudder castings. Limited space for Hex head requires thin walled 1/2" socket with 1/6" drive. Socket head bolt uses Allen head tool which is cheap, strong, and compact for on board storage and convenient adjustment.
    BOLT 5/16-18 X 1.5" (SS)
    Misc
    H20/21 Super Cruiser Compression Sleeve Murays Part# 50-31110001 This is the sleeve that goes over the dolphin striker inside the front crossbar of the H20. Hobie part# 31110001
    H20/21SC COMPRESSION SLEEVE
    Murrays Sports
    Hobie Main Traveler Track Access Plate Kit Murrays Part# 50-11810011 This kit has been discontinued by Hobie, but the plates are still available, so Murrays is producing the kits with the Hobie plates.
    HOBIE MAIN TRAVELER TRACK ACCESS PLATE KIT
    Hobie
    Out of Stock
    H20 Forward Outboard Sup Tube Murrays Part# 50-41150001
    H-20 FORWARD OUTBOARD SUP TUBE
    Hobie
    Out of Stock
    Bolt 5/16-18 x 2-3/4" HX HD Murrays Part# 50-8040391 EZ Loc upper rudder bolt for Hobie Bravo, Getaway and Wave  Hobie Part# 8040391
    BOLT 5/16-18 x 2-3/4" HX HD
    Hobie
    Out of Stock
    H16 Masthead Sheave Spacer Murrays Part# 50-20614231 H16 Masthead Sheave Spacer. This is a replacement bearing surface for the comptip masthead sheaves in H16 mastheads. Fits Hobie Getaway Masthead Sheaves Hobie Part# 20644231
    H-16 MASTHEAD SHEAVE SPACER
    Hobie
    Out of Stock
    Hobie Halyard Twist Shackle Murrays Part# 50-60670000 Classic 3/16 inch stainless steel twist shackle from Hobie Cat. Hobie Part# 60670000
    HOBIE HALYARD TWIST SHACKLE
    Hobie
    Out of Stock
    Wave Shroud with Hook Murrays Part# 50-38790001 Hobie® factory replacement shroud with hook for Wave.
    WAVE SHROUD WITH HOOK
    Hobie
    Wave Aft End Cap-Black Murrays Part# 50-38190021 Replacement end cap for Hobie Wave rear cross bar. Works on the rear crossbar only. Single cross bar cap Works on rear crossbar of Hobie Wave Hobie Part# 38190021
    WAVE AFT END CAP-BLACK
    Hobie
    Out of Stock
    Wave Batten Set Murrays Part# 50-38016001 Complete batten set for the Hobie Wave sailboat. Includes battens 1-5 in the correct lengths for your Wave mainsail.
    WAVE BATTEN SET
    Hobie
    Washer Flat 1/4 x 5/8" Murrays Part# 50-8080521 Hobie® factory replacement 5/8" x 9/32" flat washer is used on Hobie 18 mast step assembly. Hobie Part# 8080521
    WASHER FLAT 1/4 X 5/8"
    Hobie
    Hobie 8080581 Hobie factory replacement 3/8" lock washer is used on Hobie 18 front and rear inboard support castings.
    WASHER LOCK 3/8"
    Hobie
    Traveler Spacer H18 Murrays Part# 50-61880000 Hobie® factory replacement spacer for Hobie® 18 main traveler car.
    H-18 TRAVELER SPACER
    Hobie
    Out of Stock
    Traveler Adjustment Indicator Decal Murrays Part# 50-40210001 Hobie® factory traveler adjustment indicator decal for Hobie 20. Hobie Part# 40210001
    Traveler Adjustment Indicator Decal Murrays Part# 50-40210001 Hobie® factory traveler adjustment indicator decal for Hobie 20. Hobie Part# 40210001
    TRAVELER ADJUSTMENT INDICATOR DECAL
    Hobie
    Out of Stock
    H20 Jib Halyard Swivel Toggle Murrays Part# 50-41880001 Hobie® factory replacement jib halyard toggle for Hobie® 20 Miracle.
    H-20 JIB HALYARD SWIVEL TOGGLE
    Hobie
    Out of Stock
    Tiller End Cap with Pin Murrays Part# 50-37561203​ Hobie® factory replacement tiller end cap with pin for '07 tiller connector. Fits Hobie Getaway. Hobie Part# 37561203
    TILLER END CAP WITH PIN
    Hobie
    Hobie Getaway Tiller Connector Screw Murrays Part# 50-40530021 Hobie® factory replacement tiller connector screw for Club Wave. Hobie Part# 40530021
    GETAWAY TILLER CONNECTOR SCREW
    Hobie
    Getaway Tiller Arm Murrays Part# 50-37321111 Hobie® factory replacement tiller arm for Getaway pre-EZ Loc system. This does not fit the EZ Loc Rudder System Hobie Part# 37321111
    GETAWAY TILLER ARM
    Hobie
    Out of Stock
    H18 Spreader Arm Murrays Part# 50-61420000 Hobie® factory replacement spreader arm for Hobie® 18.
    H-18 SPREADER ARM
    Hobie
    HOBIE JIB HALYARD BLOCK SHEAVE Murrays PN 50-61260000 Hobie® factory replacement sheave for jib halyard block. Used on Hobie 16s and 18s. Hobie part number 61260000 and 61260010
    HOBIE JIB HALYARD BLOCK SHEAVE
    Hobie
    Screw FHSMS #8 X 3/4 Stainless Steel Murrays Part# 19-1621 Flat head, self tapping, stainless steel sheet metal screw #8 x 3/4" Compare to Hobie Part 8031501 Used to mount swivel jam cleat and Jib Car Stop
    SCREW FHSMS #8 X 3/4" (SS)
    Hobie
    Screw 8-32 X 3/8" THMS Roller Furler Drum Murrays Part# 50-8030501 Hobie® factory replacement 8-32 x 3/8" screw for roller furler drum. Hobie Part# 8030501
    SCREW 8-32X3/8" THMS
    Hobie
    Screw 1/4-20 x 1" THMS-P SS Murrays Part# 50-8030701 Hobie® factory replacement 1/4-20 x 1" stainless steel screw. Used on Hobie® pre-EZ-Loc rudder system, tendon tiller connector, rudder adjuster, Hobie 20 shroud anchor plate. Applications: H18/ Hobie 18 SX Rudder Adjuster Screw: 1 Compare to Hobie Part# 8030701
    SCREW STAINLESS STEEL 1/4-20x1"
    Hobie
    H14 Mainsail (White) Murrays Part# 50-10990010 White Mainsail for the Hobie 14, made by Hobie Cat. 6 oz heavy duty dacron sail cloth for long term durability. Comes with sail number preinstalled. Fits all Hobie 14 sailboats.
    H-14 MAINSAIL (WHITE)
    Hobie
    Out of Stock
    H14/16 Rudder Casting Upper Left Black Murrays Part# 50-10352011 Hobie® factory replacement upper left rudder casting for Hobie® 14 or 16. Requires two 6-6 rivets (item #19-5032) and one 6-8 rivet (item #19-5033) to install tiller tube.
    H-14/16 UPPER LEFT RUDDER CASTING-BLACK
    Hobie
    H14/16 Rudder Cast Upper Right Black Murrays Part# 50-10362011 Hobie® factory replacement upper left rudder casting for Hobie® 14 or 16. Requires two 6-6 rivets (item #19-5032) and one 6-8 rivet (item #19-5033) to install tiller tube.
    H14/16 UPPER RIGHT RUDDER CASTING-BLACK
    Hobie
    Out of Stock
    H17/18/20 Lower Rudder Casting Murrays Part# 50-50322001 Hobie® factory replacement lower rudder casting for Hobie® 17, 18, 20, Getaway and Wave. This casting does not fit Hobie® 14 or 16.
    H-17/18/20 LOWER RUDDER CASTING
    Hobie
    H17/18/20 Upper Right Rudder Casting Murrays Part# 50-50341001 Hobie® factory replacement upper right rudder casting for Hobie® 17, 18 or 20. Use four 6-8 rivets (#19-5033) for installation. Hobie Part# 50341001
    H-17/18/20 UPPER RIGHT RUDDER CASTING
    Hobie
    H20 Roller Furling Kit Murrays Part# 50-48921001 Use the standard Hobie® 20 jib with no modification! The roller furling hardware kit for the Hobie® 20 includes patented Hobie furler drum, forestay, halyard system, and all necessary hardware and fasteners.
    H-20 ROLLER FURLING KIT
    Hobie
    H18 Roller Furler Tube Murrays Part# 50-61910000 Hobie® factory replacement roller furler tube for roller furler. Hobie Part# 61910000
    H-18 ROLLER FURLER TUBE
    Hobie
    H18 Roller Furler Yoke Assembly Murrays Part# 50-61980000 Hobie® factory replacement yoke assembly for roller furler. Hobie Part# 61980000
    H-18 ROLLER FURLER YOKE ASSEMBLY
    Hobie
    Rivet 3/16 x 5/16 Aluminum Murrays Part# 50-8010071 Hobie® factory aluminum 3/16" x 5/16" rivet. A rivet tool is required for installation.
    RIVET 3/16X 5/16 ALUMINUM
    Hobie
    Rudder Lock Release Strap Murrays Part# 56-4010 This is one of two plates used in each rudder assembly on a Prindle beach cat. This is part of the internal assembly that moves up and down as part of the rudder pull up/down system. The Prindle Rudder Lock Release Strap is works on all Prindles. Nacra sailing factory item# 30415 Prindle Part# 4010
    PRINDLE RUDDER LOCK RELEASE STRAP
    NACRA
    Mast Base Hinge Murrays Part# 56-6516 Mast base hinge plate for Prindle 15 Performance Sports Factory item# 6516
    PRINDLE MAST BASE HINGE
    NACRA
    Recently viewed