Murrays.com Hobie shroud, forestay, halyard, mast bearing

Murrays

764 products

    Hobie, Nacra and Prindle rigging: shrouds, halyards, bridles, forestays and small parts like mast bearings, trapeze handles, rudder cam kits, rudder pins, righting lines and more.

     

    764 products
    Sail Ring Pack (30)
    Murrays Sports
    WETA FORESTAY 3/32 BARE
    Murrays Sports
    WETA SHROUD 3/32" BLACK
    Murrays Sports
    Used h16 mainsheet system 5:1
    Murrays Sports
    SMOOTH SAILING RIG TENSION KIT - WAVE
    Murrays Sports
    7" wire lanyard
    WIRE LANYARD 7 INCH
    Murrays Sports
    WAVE TRAMPOLINE LACING KIT
    Murrays Sports
    DART-18 FORESTAY 1/8 BARE
    DART-18 FORESTAY 1/8" BARE
    Murrays Sports
    This "potato chip" (2" OD) pad fits or can be modified to fit almost any main beam extrusion for use with a 3-hole swivel cleat. To modify, put sandpaper on beam and rub base pad to suit and/or fill gap with silicone sealant and allow to dry before securing.
    BASE PAD UNIVERSAL 3-HOLE KIT
    Murrays Sports
    Out of Stock
    PAD NACRA 4-HOLE (PORT)
    Murrays Sports
    H-20 JIB BLOCK WIRE (BARBERHLR)
    Murrays Sports
    H18 Dimond Wire without Turnbuckle Murrays Part# 002-0494-20 Diamond wire for one side of a Hobie® 18 is constructed with stainless fork, jib roller and left-hand threaded stud. Turnbuckle not included. Please note: The diamond wire will be constructed with a stud that has left hand threads. Please contact Murrays if you have an older Hobie® 18, as right hand threads may be required. The change to the left handed thread happened some time in the early 80's.
    H-18 DIAMOND WITHOUT TURNBUCKLE
    Murrays Sports
    H17 Sport Upper Forestay 5/32" Black Wire Murrays Part# 002-0335-02 Black upper forestay for Hobie® 17 Sport is constructed to factory specifications. Compare to Hobie Part# 52812011
    H-17S UPPER FORESTAY 5/32" BLACK WIRE
    Murrays Sports
    H-17 BRIDLE CROSSBAR ASSEMBLY
    Murrays Sports
    SERIES 19 JIB SHEET & TRAVELER UPGRADE
    Murrays Sports
    Footstrap Insert 1" This 1" footstrap insert is the best choice for custom fiberglass or epoxy skinned boards. Use #10 screw (#19-3211) and washer (#19-4011). Also available as a kit (#01-9518) that includes pair of inserts with fasteners. Sold individually
    1" FOOTSTRAP INSERT (EA)
    Murrays Sports
    Folding Anchor Kit Murrays Part# 001-6051 The convenient 7"x17" zippered pouch holds a 3.5-lb. folding anchor with chain and 50 feet of polypropylene line. Clip the pouch in a convenient location or stow the kit in an access port.
    FOLDING ANCHOR KIT
    Murrays Sports
    Footstrap Inserts with Screws Murrays Part# 001-9518 Includes two footstrap inserts, four screws and four washers. Sold as a pair
    FOOTSTRAP INSERT WITH SCREWS (PR)
    Murrays Sports
    Lido 14 Forestay 3/32" White Murrays Part# 002-5143-91 Forestay for Lido 14 is constructed of 3/32" white-coated wire to factory specifications.
    LIDO 14 FORESTAY 3/32" WHITE WIRE
    Murrays Sports
    Inter F17 Diamond Wire without Turnbuckle Murrays Part# 002-5294-20 Set of diamond wires for both sides is a continuous wire with one thimble at the bottom. No turnbuckle. Constructed to factory specifications.
    INTER F17 DIAMOND WIRE WITHOUT TURNBUCKLE
    Murrays Sports
    Inter 18 Diamond Wire without Turnbuckle Murrays Part# 002-5394-20 Diamond wire without turnbuckle for Inter 18 is constructed to factory specifications. Includes both sides.
    NACRA INTER 18 DIAMOND WIRE WITHOUT TURNBUCKLE
    Murrays Sports
    NACRA INTER 18 JIB HALYARD
    Murrays Sports
    Nacra Inter 18 Double Trapeze (4 handles) The Murrays Double Trapeze is a set of 4 black or white coated trap wires with 4 handles for double trapezing. A single thimble per pair of handles eliminates clutter at that mast connection. Order shock cord, harness loops and adjustment kits separately. A complete trapeze system requires the following: Harness loop - Can't Miss Ring or Dogbone Trap Shock Cord Trap Adjustment kit Sailing Harness ​Trapeze adjustment kits (#001-1121, 001-1130 or 001-1140
    NACRA INTER 18 DOUBLE TRAPEZE BLACK WIRE (4)
    Murrays Sports
    Wave Club 3-Piece Mesh Trampoline-Black The Murrays Hobie Wave Club 3-Piece Black Mesh Trampoline is not Hobie Class-legal for racing. Polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won't be sitting in a puddle. Features: A main halyard pocket and hiking straps. Order 43' of 1/4" low-stretch line for lacing (21' for center and two 11' pieces aft). ​Compare to Hobie Part#
    WAVE CLUB 3-PIECE MESH TRAMPOLINE-BLACK
    Murrays Sports
    H21 Special Edition Jib Halyard with Shackle Murrays Part# 002-0586-00 Jib halyard with shackle for Hobie® 21SE (Special Edition) is constructed to factory specifications. The H21SE is sometimes confused with the H21SC (Sport Cruiser). Please note that the H21SE is differentiated by its 10' beam and lack of a front tramp.
    H-21SE JIB HALYARD WITH SHACKLE
    Murrays Sports
    H21SE Upper Forestay 5/32" Wire Murrays Part# 002-0535-02 Black upper forestay for Hobie® 21 Special Edition is constructed to factory specifications. The H21SE is sometimes confused with the H21SC (Sport Cruiser). Please note that the H21SE is differentiated by its 10' beam and lack of a front tramp.
    H-21SE UPPER FORESTAY 5/32" BLACK WIRE
    Murrays Sports
    H21 Special Edition Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-0505-12 Single shroud (sidestay) for Hobie® 21 Special Edition has hydraulically swaged fittings for a cleaner, stronger shroud. It is constructed to factory specifications. The H21SE is sometimes confused with the H21SC (Sport Cruiser). Note: The H21SE is differentiated by its 10' beam and lack of a front trampoline.
    H-21SE SHROUD 5/32" BLACK WIRE ROLLER SWAGED
    Murrays Sports
    H21SE Forestay 5/32" Wire Murrays Part# 002-0545-32 Forestay for Hobie® 21SE (Special Edition) is constructed to factory specifications. The H21SE is sometimes confused with the H21SC (Sport Cruiser). Please note that the H21SE is differentiated by its 10' beam and lack of a front tramp.
    H-21SE FORESTAY 5/32" BLACK WIRE
    Murrays Sports
    H21 Sport Cruiser Bridle 5/32" Wire Murrays Part# 002-0514-22 One bridle for Hobie® 21SC is constructed of 5/32" wire to factory specifications. Wire has black coating. The H21SC is sometimes confused with the H21SE (Special Edition). Please note that the H21SC is differentiated by its 8.5' beam, front trampoline and Hobie® 18 rigging.
    H-21SC BRIDLE 5/32" WIRE
    Murrays Sports
    N-5.7 JIB HALYARD W/SHACKLE
    Murrays Sports
    N-5.5SL JIB HALYARD WITH SHACKLE
    Murrays Sports
    N-5.2 JIB HALYARD WITH SHACKLE
    Murrays Sports
    N6.0 Forestay 5/32" Black Wire Murrays Part# 002-4645-12 Forestay for Nacra 6.0 is constructed of black-coated 5/32" wire to factory specifications.
    N-6.0 FORESTAY 5/32" BLACK WIRE
    Murrays Sports
    N-6.0NA BRIDLE 5/32-BLACK WIRE
    Murrays Sports
    Out of Stock
    N-6.0/6.0NA JIB BLOCK WIRE
    Murrays Sports
    N-6.0 BRIDLE 5/32 BLACK WIRE
    Murrays Sports
    N6.0 Diamond Wire with Turnbuckle Murrays Part# 002-4694-20 Diamond wire with turnbuckle for Nacra 6.0 is constructed to factory specifications.
    N-6.0 DIAMOND WIRE WITH TURNBUCKLE
    Murrays Sports
    N5.8 Forestay 5/32" Black Wire Murrays Part# 002-4545-12 The Nacra 5.8 forestay is constructed to factory specifications from 5/32" black-coated wire. Their are 2 versions of the Nacra 5.8. The standard 5.8 which is mostly found in Europe and N.A. which is the North American version. The N.A. has a longer forestay that connects to a bridle foil rod instead of bridle wires.
    N-5.8 FORESTAY 5/32" BLACK WIRE
    Murrays Sports
    N-5.8 DIAMOND WIRE WITH TURNBUCKLE
    Murrays Sports
    N-5.7 MAIN HALYARD W/SHACKLE
    Murrays Sports
    Recently viewed