In Stock

In Stock

2261 products

    Everything Murrays Marine carries, all in one place.  Catamaran parts, Kiteboarding and wing foiling central. Use the filters on the side or the search up top to refine your search.

    2261 products
    Used h16 mainsheet system 5:1
    Murrays Sports
    V JAM CLEAT BOOM (3/16" HOLES)
    Hobie
    Velocitek Prostart Mounting Bracket Murrays Part# 49-0050-1 Velocitek's ProStart mounting bracket is compatible with almost all sportboat and dinghy masts that have a bolt rope track. The bracket comes packaged with a hex key, a strip-resistant stainless steel slug and all the screws, nuts and washers required to attach the ProStart to the bracket and the bracket to your mast. The design of the bracket provides space for lines to pass behind the ProStart.
    VELOCITEK PROSTART MOUNTING BRACKET
    Misc
    VERTICAL BOW POLE
    NACRA
    WASHER #8 (WH NYLON) Murrays PN 19-4006WH White nylon washer is used for installation of access ports (hatches).
    WASHER #8 WHITE NYLON
    Misc
    Washer 1/4 Flat Stainless Steel Murrays Part# 19-4016 Thin, flat stainless steel washer measures 1/2" OD (outside diameter) x 1/4" ID (inside diameter)
    WASHER 1/4" FLAT (SS)
    Misc
    Washer 5/16x3/4" Stainless Steel Murrays Part# 19-4018 Flat stainless steel washer with 5/16" diameter hole.
    WASHER 5/16x3/4" SS
    Misc
    WASHER 8mm X 42mm (BK NYLON)
    Murrays Sports
    Washer Flat 1/2 X 7/8 Murrays Part# 50-8080601 Hobie® factory replacement 1/2" x 7/8" washer. Hobie Part# 8080601
    WASHER FLAT 1/2 X 7/8"
    Hobie
    Washer Flat 1/4 x 5/8" Murrays Part# 50-8080521 Hobie® factory replacement 5/8" x 9/32" flat washer is used on Hobie 18 mast step assembly. Hobie Part# 8080521
    WASHER FLAT 1/4 X 5/8"
    Hobie
    Washer 5/16 X 9/16 Flat Murrays Part# 50-8080181 Hobie Part# 8080181
    WASHER FLAT 5/16 X 9/16"
    Hobie
    Hobie 8080581 Hobie factory replacement 3/8" lock washer is used on Hobie 18 front and rear inboard support castings.
    WASHER LOCK 3/8"
    Hobie
    Washer 3/8 X 3/4 Nylon for 07-1953 Murrays Part# 50-8080691 Washer for tiller arm bolt #50-8040171. Hobie® factory item
    WASHER NYLON 3/8 X 3/4"
    Hobie
    Washer Stainless Steel 5/8 X 1-5/16" Murrays Part# 50-8080711 Hobie® factory replacement stainless steel 5/8" x 1-5/16" washer. This is the dolphin striker washer on Hobie 20 Miracle and is also used on the Hobie Getaway mast step system. Hobie Part# 8080711
    WASHER SS 5/8 X 1-5/16"
    Hobie
    WASHER STAINLESS STEEL 1/4 x 1/2 x .032"
    Hobie
    Washer 5/16 x 3/4 Flat SS Murrays Part# 50-8080671 EZ Loc Rudder Assembly Lower Bolt Washer for Hobie Bravo, Getaway and Wave Hobie Part# 8080671
    WASHER STAINLESS STEEL 5/16 x 3/4" FLAT
    Hobie
    WASHER STAINLESS STEEL 8.4 STANDARD
    Murrays Sports
    Waterproof Sports Bag Lightweight 60L by Magic Marine
    WATERPROOF SPORTS BAG LIGHTWEIGHT 60L
    Magic Marine
    Hobie 16 turquoise mesh trampoline Hobie 20970058
    WAVE 3-PIECE CLUB TRAMPOLINE WITH TEFLON THREAD-LAKE BLUE
    Murrays Sports
    Hobie Wave 4:1 Main Sheet System Murrays Part# 28-041 The Murrays Hobie low profile 4:1 main sheet system for the Hobie Wave. By Adding a fairlead to the back side of the cleat on the base block we have made a low profile main sheet system that no longer needs a becket on the base block. We have also replaced the upper fiddle block with a double block which makes it even more compact. The result is a lightweight, low profile and very strong, made with 40mm Harken Carbo AirBlocks.
    Murrays low profile Hobie Wave main sheet system
    WAVE 4:1 MAIN SHEET SYSTEM
    Murrays Sports
    Wave Aft End Cap-Black Murrays Part# 50-38190021 Replacement end cap for Hobie Wave rear cross bar. Works on the rear crossbar only. Single cross bar cap Works on rear crossbar of Hobie Wave Hobie Part# 38190021
    WAVE AFT END CAP-BLACK
    Hobie
    The Murrays Pins & Rings Kit: Hobie Wave + Getaway includes the most often used spare clevis pins and split rings for the Hobie Wave and Hobie Getaway. Compare to Hobie Part # 30302
    WAVE AND GETAWAY PINS & RINGS KIT
    Murrays Sports
    Wave Assembly Manual Murrays Part# 50-38450000 Hobie® factory assembly manual for the Wave catamaran. The manual is also available for free download at the Hobie Cat® Web site.
    WAVE ASSEMBLY MANUAL
    Hobie
    WAVE BATTEN CAPS Tren Tech main sail batten cap kit for the Hobie Wave.  Includes 3 large batten caps, 2 small batten caps and batten tie line.
    WAVE BATTEN CAPS
    Murrays Sports
    Hobie Wave Bow Spreader Tang Murrays Part# 50-38120041 Replacement tang for Hobie Wave bow spreader. Hobie Part# 38120041
    WAVE BOW SPEADER TANG
    Hobie
    Wave Bridle 1/8" Black Murrays Part# 002-0814-02 One black bridle for Hobie® Wave is constructed to factory specifications. Compare to Hobie Cat® 39822011.
    WAVE BRIDLE 1/8" BLACK WIRE
    Murrays Sports
    Eyestrap Wave Bridle Murrays Part# 50-38120011 ​Hobie® factory replacement eyestrap for Hobie Wave bridle.
    WAVE BRIDLE EYESTRAP
    Hobie
    Wave Club 3-Piece Mesh Trampoline-Black The Murrays Hobie Wave Club 3-Piece Black Mesh Trampoline is not Hobie Class-legal for racing. Polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won't be sitting in a puddle. Features: A main halyard pocket and hiking straps. Order 43' of 1/4" low-stretch line for lacing (21' for center and two 11' pieces aft). ​Compare to Hobie Part#
    WAVE CLUB 3-PIECE MESH TRAMPOLINE-BLACK
    Murrays Sports
    Wave Club Traveler Kit Murrays Part# 50-39250000 The Hobie Wave Main Traveler Kit is the Hobie factory main traveler kit for Club Wave includes track, Ronstan cleat, traveler car, mounting plate and rivets.
    WAVE CLUB TRAVELER KIT
    Hobie
    Wave Forestay 1/8" Black Murrays Part# 002-0844-02 One black forestay for Hobie® Wave is constructed to factory specifications. Compare to Hobie Cat® #39810001.
    WAVE FORESTAY 1/8" BLACK WIRE
    Murrays Sports
    The Hobie Wave Forestay Adjuster w/ Toggle Murrays PN 001-2085 The Murrays Wave Forestay Adjuster with Toggle is a must have for speeding up the rigging process on your Hobie Wave. This adjuster includes a toggle pin with lanyard that can't fall off of your bridle assembly. This allows you to easily raise and pin the mast single handed! The toggle is affixed around the center of the adjuster with a slightly longer lanyard to keep it out of the way of your bridle vane or other accessories.
    Wave Forestay Adjuster w/ Toggle Murrays PN 001-2085 The Murrays Wave Forestay Adjuster with Toggle is a must have for speeding up the rigging process on your Hobie Wave. This adjuster includes a toggle pin with lanyard that can't fall off of your bridle assembly. This allows you to easily raise and pin the mast single handed! The toggle is affixed around the center of the adjuster with a slightly longer lanyard to keep it out of the way of your bridle vane or other accessories.
    WAVE FORESTAY ADJUSTER W/ TOGGLE PIN
    Murrays Sports
    WAVE GREY MESH TRAMPOLINE
    Murrays Sports
    WAVE JIB SALE 6OZ BLUE
    Murrays Sports
    Hobie Wave Jib Spreader End Cap Murrays Part# 50-38950011 This is part of the Wave bow spreader kit. These go into the ends of the spreader pole. Replacement end cap for Hobie Wave jib spreader assembly. Sold individually Hobie Part# 38950011
    WAVE JIB SPREADER END CAP
    Hobie
    Hobie Wave Keeper Pin With Lanyard Murrays Part# 50-38490011 Hobie® factory replacement keeper wire with pin for Wave and Getaway. Hobie part# 38490011
    WAVE KEEPER PIN WITH LANYARD
    Hobie
    The Murrays main halyard for Hobie Wave is constructed with 1/4" polyester yacht braid line and 316 stainless wire finished with a halyard shackle with a captured pin, Built to factory specifications. A main halyard is used to raise the main sail. Compare to Hobie part number 38651001.
    WAVE MAIN HALYARD
    Murrays Sports
    Wave Mainsheet S Hook Murrays Part# 50-38900031 Hobie® factory replacement S-hook for Wave mainsheet. Mainsheet is 35 feet of Dacron® spun braid #39-055. Makes it easy to attach mainsheet to sail and standard on all new boats. Hobie Part# 38900031
    WAVE MAINSTEET S HOOK
    Hobie
    WAVE MAST ASSEMBLY (2 PIECE)
    Hobie
    WAVE SAIL BAG DELUXE
    Murrays Sports
    Wave Shroud 1/8" Black Wire Murrays Part# 002-0804-02 Single black shroud (sidestay) for Hobie® Wave is constructed to factory specifications. Compare to Hobie Part# 39790001
    WAVE SHROUD 1/8" BLACK WIRE
    Murrays Sports
    Recently viewed