In Stock

In Stock

2397 products

    Everything Murrays Marine carries, all in one place.  Catamaran parts, Kiteboarding and wing foiling central. Use the filters on the side or the search up top to refine your search.

    2397 products
    SERIES 19 JIB SHEET & TRAVELER UPGRADE
    Murrays Sports
    Shackle Pin Only 1/4 Threaded Murrays Part# 21-0033 Threaded stainless pin fits 1/4" Ronstan D or bow shackle.
    SHACKLE PIN ONLY 1/4" THREADED
    Ronstan
    Shackle Pin Only 3/16 Threaded Murrays Part# 21-0032 Threaded stainless pin fits 3/16" Ronstan D or bow shackle.
    SHACKLE PIN ONLY 3/16" THREADED
    Ronstan
    Shock Cord Pliers  Murrays Part# 33-0010 Close stainless cinch rings completely without burring. These shock cord pliers are for all cinch rings up to 1/2". Made of plated, case-hardened steel with a spring grip. Hobie Cat® uses #83104 for this item.
    SHOCK CORD PLIERS
    Misc
    Shroud Stay Adjuster 7 Hole Murrays Part# 25-3310 Stainless steel shroud adjuster with seven 1/4" holes. ​Use #22-9802 clevis pin at top and #22-9808 at bottom. Fits: H14/16/18/20, Wave and Getaway. Compare to Hobie Part# 20830010
    SHROUD STAY ADJUSTER 7-HOLE
    Murrays Sports
    SHROUD TENSIONER
    SHROUD TENSIONER/DE-TENSIONER
    Misc
    Sidewinder Becket Murrays Part# 005-0701 Add on becket for classic Harken Mainsheet systems. The sidewinder becket is for older Harken 2.25" or 3.00" triple blocks. It enables extra purchase ratio without sacrificing low profile block stacking. Some drilling is required for installation.
    SIDEWINDER BECKET
    Murrays Sports
    SINGLE SHANK BALL STOP 3/32"
    Misc
    Single Wire Block With Shackle Murrays Part# 22-3302 This single wire block can be used to replace the jib halyard block on Nacra 5.2, Performance part 9896.
    SINGLE WIRE BLOCK WITH SHACKLE
    Schaefer Marine
    Sister Clip Micro  Murrays Part# 004-7730 The stainless steel micro sister clip is a quick connector with no moving parts. The micro sister clip does not have a slot.
    SISTER CLIP MICRO (EA)
    Murrays Sports
    SK78 Dyneema Whipping Twine Murrays Part# 21-WD1R Dyneema® whipping twine excels mostly due to its high breaking loads and smooth surface. It is easy to handle and requires no additional waxing. Specifications: Material: Dyneema® SK78 Diameter: 1 mm Length: 50 m Color: Red
    SK78 DYNEEMA WHIPPING TWINE
    Robline
    SK78 MINI DYNEEMA SPOOL 2MM
    Robline
    SK78 Mini Spool 3mm Dyneema Lashing Line The SK78 Mini Spool 3mm- Robline Dyneema good for any small boat kit…. for tying. lashing, lanyards, pigtails etc. Easily spliced with a small Selma Fid or a D Splicing tool. Honeywell International produces a similar line, marketed as Spectra® Identical to Ocean 3000 XG, but on a smaller spool, this rope is made of pure Dyneema SK78 and treated with FSE Robline’s S.Y.I.S. coating technology. Dyneema SK78 has the same high strength of SK75, but with lower creep
    SK78 MINI DYNEEMA SPOOL 3MM
    Robline
    SLINGSHOT 1-PUMP TUBES AND CLIPS
    Misc
    Slingshot Pigtails Murrays part# 54-6013 Replacement pigtails with foolproof connections help prevent wear and tear on your lark's heads. Easy to pull off, saving teeth and nails. Line/bar pigtails are pictured. Sold in a package of 4
    SLINGSHOT PIGTAILS (BAR)
    Misc
    SLINGSHOT PIGTAILS (KITE)
    Misc
    SMALL BLOCK W/REMOVABLE SHEAVE This small block is used on trapeze adjustment systems where the removable sheave enables installation without cutting wires. Specifications: 1-3/16" removable sheave, Teflon® bearing and 5/16" line capacity. Hobie item #3103
    SMALL BLOCK W/REMOVABLE SHEAVE This small block is used on trapeze adjustment systems where the removable sheave enables installation without cutting wires. Specifications: 1-3/16" removable sheave, Teflon® bearing and 5/16" line capacity. Hobie item #3103
    SMALL BLOCK WITH REMOVABLE SHEAVE
    Murrays Sports
    Snap Hook #1 (Bronze) Murrays Part# 27-3461 Die cast manganese bronze snap hook measures 2-7/8" overall with 11/16" diameter hole and 1/4" opening. Weight: .05 lb.
    SNAP HOOK #1 (BRONZE)
    Misc
    Snap Shackle with Swivel Eye Murrays Part# 22-4521 2-3/4" long stainless steel snap shackle with swivel eye has 1/2" diameter eye. SWL 1000 lbs. Weighs 2.4 oz.
    SNAP SHACKLE WITH SWIVEL EYE
    Misc
    10-24 x 1/2 Socket Head Screw Murrays Part# 13-1226
    SOCKET HEAD SCREW 10-24 x 1/2"
    Murrays Sports
    Screw Socket Head 5/16-24 x 2" Murrays Part# 50-8031821 Hobie® factory replacement 5/16-24 x 2" socket head stud. Used in Hobie 18SX wing mounting kit. Hobie Part# 8031821
    SOCKET HEAD SCREW 5/16-24x2"
    Hobie
    Made from 18 stainless steel these set screws are chemical resistant and may be mildly magnetic. They have a thin edge that digs into the contact surface for a secure hold. Length listed is the overall length. Screw for the Hobie 18 wing mount kit. 65071001
    SOCKET SCREW 5/16-18 x 2"
    Misc
    SOFT GRIP FX/HOT STICKS
    Hobie
    Soft Grip Standard Extension .570 x 11" Murrays Part# 007-3206 This is a grip upgrade for the standard Hobie Tiller extension, it will also fit the Murrays fixed tiller extension as well. Hobie Part# 3206
    SOFT GRIP STANDARD EXTENSION .570 x 11"
    Hobie
    Sol Cat -18 Double Trapeze (4 handles) The Murrays Double Trapeze is a set of 4 black or white coated trap wires with 4 handles for double trapezing. A single thimble per pair of handles eliminates clutter at that mast connection. Order shock cord, harness loops and adjustment kits separately. A complete trapeze system requires the following: Harness loop - Can't Miss Ring or Dogbone Trap Shock Cord Trap Adjustment kit Sailing Harness ​Trapeze adjustment kits (#001-1121, 001-1130 or 001-1140, purchased s
    SOL 18 DOUBLE TRAPEZE (4)
    Murrays Sports
    Sol Cat 18 Bridle 1/8" Murrays Part# 002-6214-02 Single bridle for Sol Cat 18 Bridle 1/8" is constructed to factory specifications.
    SOL-18 BRIDLE 1/8" BLACK WIRE
    Murrays Sports
    SOL-18 BRIDLE 1/8" WHITE WIRE
    Murrays Sports
    SOL-18 FORESTAY 1/8 -BLACK
    Murrays Sports
    SOL-18 FORESTAY 1/8" WHITE WIRE
    Murrays Sports
    SOL-18 JIB HALYARD WITH SHACKLE
    Murrays Sports
    SOL-18 MAIN HALYARD W/SHACKLE Main halyard for a 18' Sol Cat catamaran.
    SOL-18 MAIN HALYARD WITH SHACKLE
    Murrays Sports
    SOL-18 SHROUD 1/8" BLACK
    Murrays Sports
    SOL-18 SHROUD 1/8" WHITE WIRE
    Murrays Sports
    SOL-18 TRAMPOLINE
    Murrays Sports
    Hobie Sol Cat 18 Trapeze Wires (2 Handles) Trapeze Wire set for single trapeze. Use this page to order product numbers: 002-6253-01 002-6253-02
    Hobie Sol Cat 18 Trapeze Wires (2 Handles) Trapeze Wire set for single trapeze. Use this page to order product numbers: 002-6253-01 002-6253-02
    SOL-18 TRAPEZE WIRES (2)
    Murrays Sports
    Solid Rivet 1/8 x 5/16" Brass Murrays Part# 19-5004 Solid Rivet 1/8 x 5/16 Brass Used on sail headboards, clew and tack plates. Hobie Part# 8010020
    SOLID RIVET-BRASS
    Misc
    SPACER PLATE
    Murrays Sports
    SPACER PLATE WITH HOLE
    Murrays Sports
    SPINNAKER POLE MOUNT
    Hobie
    SPLIT CABLE COVER 1/8"
    Davis
    Recently viewed