In Stock

In Stock

2261 products

    Everything Murrays Marine carries, all in one place.  Catamaran parts, Kiteboarding and wing foiling central. Use the filters on the side or the search up top to refine your search.

    2261 products
    SUP PADDLE GUARD KIT
    Misc
    A Multi-Sport / Water / Reef Helmet Hat. Purposely designed for Indo Surfing, Kitesurf, kiteboarding, Windsurf, Sailing, Kayaking & Wingboarding. It has a Hard protective shell for light / medium impacts. Non-water absorbent Foam with Water Proof Lining built for Flex Comfortability
    SURF AND FOIL IMPACT HAT
    Misc
    Overhead Surf-Cap-Safety Retainer Murrays Part# 54-4413 The Hat Leash is finally here!  New from Overhead Surf is the Cap-Safe Retainer lanyard. Simply attached to your hat or cap and ensures that if it does get blown off your head, it stays with you.  Total hat saver!!  Now featuring a breakaway snap on the leash so it wont try to rip your head off if the hat gets caught on something. Features: Break away snap connection Hook/Loop for hat connection
    SURF HAT SAFETY RETAINER
    Misc
    Swivel with Bulls-Eye (No Cleat) Murrays Part# 25-3011 This item includes the swivel with bullseye, but not the cleat. Swivel cam cleats (cleat sold separately) are ideal for main traveler control and up-release jib cleating systems. Order plastic base pads and fasteners separately.
    SWIVEL WITH BULLS-EYE (NO CLEAT)
    Murrays Sports
    T-9 Boeshield 4oz was developed by The Boeing Company for lubrication and protection of aircraft components. It is a combination of solvents, lubricants, and waxes designed for penetration, moisture displacement, lubrication and protection. Boeshield T-9® dries to a thin waxy film that clings to metal for months. It will loosen rusty and corroded parts and is safe on paints.
    T-9 BOESHIELD 4oz
    T-9
    T-NUT CHANNEL INSERT 8mm BRASS
    Misc
    Tack Clew Plate Replacement Kit Murrays Part# 001-1016 ​The Tack & Clew Plate Replacement Kit includes one pair anodized aluminum plates with rivets to be set with a hammer. Rounded triangular plates measure 2-1/2″ by 2-1/2″ by 3″. Replacement rivets are available separately (#19-5005). These are commonly used as the H16 main sail clew plate and tack plate on older H16 sails. Newer sails use a hydraulic press ring at the tack and clew. Compare to Hobie part number 12240000.
    TACK AND CLEW PLATE REPLACEMENT KIT
    Murrays Sports
    Tear-Aid Type A is the best-known kite and sail repair tape and it works on all kite canopy / sail materials: Dacron, mylar and ripstop nylon and kite bladders. Each package includes one foot of clear repair tape, alcohol pad and instructions. To use, clean area to be repaired with alcohol, cut patch to size, then peel and stick.
    TEAR-AID KITE/SAIL REPAIR PATCH (3x12")
    Tear-Aid
    Tear-Aid Type A is the best-known kite and sail repair tape and it works on all sails, kites and wings: Dacron, Mylar and Ripstop nylon and Bladders. Each package includes one foot of clear repair tape, alcohol pad and instructions. To use, clean area to be repaired with alcohol, cut patch to size, then peel and stick
    TEAR-AID® KIT (6"x12")
    Tear-Aid
    Tear-Aid a Roll Murrays Part# 010-3312-1 Tear-Aid Type A is the best-known kite and sail repair tape and it works on all sails, kites and wings: Dacron, Mylar and Ripstop nylon and Bladders. To use, clean area to be repaired with alcohol, cut patch to size, then peel and stick Tear-Aid® is a durable, flexible, airtight, watertight, puncture-resistant, industrial-strength patch that protects against abrasion, moisture, saltwater, UV sunlight and extreme temperatures. The patch's unique composition s
    TEAR-AID® ROLL (6"x30')
    Tear-Aid
    TEF-GEL HYDROFOIL HARDWARE LUBRICANT
    Misc
    Telescoping Paddle 20" to 45" Murrays Part# 001-1303 Compact paddle power made tough for years of hard use. The paddle has a T-Grip handle and extends from 20" to 45". The bright orange blade doubles as a signaling device. Paddles are required by law in many states for small boats and personal watercraft. Hobie Cat® uses item #3091 for this paddle.
    TELESCOPING PADDLE 20" TO 45"
    Davis
    Aluminum Adjustable tiller extension for Hobie, Nacra and Prindle catamarans. Compare to Hobie 20550001 Hobie hot stick
    Murrays Part# 001-0062 Replacement tiller yoke assembly for all hiking sticks sold by Murrays. Used to connect the tiller extension to the tiller crossbar. Includes two contoured spacers that provide a solid platform for the yoke to sit on. Compare to Hobie Cat® Tiller yoke assembly #3205 or NACRA connection part tiller/joystick #31072 Applications: All Hobies and Prindles Tiller Yoke Assembly: 1
    TELESCPOING TILLER EXTENSION 50"-95"
    Murrays Sports
    Hobie 378 Replacement vane for Telo-Cat™ and Black Max is constructed of tough, high-impact plastic vane with visible trim markings.
    TELO-CAT REPLACEMENT VANE - DISCONTINUED
    Davis
    Thimble 3/32" - 1/8" Stainless Steel Stainless Steel Light Duty Wire Rope Thimbles are designed to provide basic reinforcement and protection for wire rope loops in low-load applications. Light-duty thimbles are more compact and are used in situations where the rope is not subjected to extreme tension or heavy stress. Their purpose is to prevent wire rope loops from fraying, deforming, or wearing at the contact point, while maintaining the shape and integrity of the loop. Stainless Steel Light Duty W
    THIMBLE 3/32" - 1/8" (SS)
    Misc
    Thimble 5/32" - 3/16" Stainless Steel Murrays Part# 001-0036 Stainless Steel Light Duty Wire Rope Thimbles are designed to provide basic reinforcement and protection for wire rope loops.  These thimbles are use on Hobie. Nacra, Prindle and most other beach catamaran rigging. Halyards, shrouds, bridles, and trapeze wires. Type 316 Stainless Steel is a high-performance alloy known for its superior resistance to corrosion, especially in environments exposed to saltwater, chemicals, and extreme weather.
    THIMBLE 5/32" - 3/16" (SS)
    Misc
    Murrays PN 19-3611 Truss Head Machine Screw 10-24 thread Pitch x 1.5" long Stainless Steel Phillips Head Screw.
    THMS #10-24 X 1.50 (SS) PHIL
    MISC
    TIGER BRIDLE 5/32"
    Murrays Sports
    Daggerboard Hold Down Tiger 50-F99501200 Hobie® factory daggerboard hold down for Tiger.
    TIGER DAGGERBOARD HOLD DOWN
    Hobie
    Tiger Diamond Wire Double without Turnbuckle Murrays Part# 002-6095-20 Double diamond wire without turnbuckle for Hobie® Tiger is constructed to factory specifications.
    TIGER DIAMOND WIRE DOUBLE WITHOUT TURNBUCKLE
    Murrays Sports
    Tiger Double Trapeze (4 handles) The Murrays Double Trapeze is a set of 4 black or white coated trap wires with 4 handles for double trapezing. A single thimble per pair of handles eliminates clutter at that mast connection. Order shock cord, harness loops and adjustment kits separately. A complete trapeze system requires the following: Harness loop - Can't Miss Ring or Dogbone Trap Shock Cord Trap Adjustment kit Sailing Harness ​Trapeze adjustment kits (#001-1121, 001-1130 or 001-1140, purchased
    TIGER DOUBLE TRAPEZE (4)
    Murrays Sports
    TIGER GUDGEON SCREW 2008
    Hobie
    TIGER JIB HALYARD WITH SHACKLE ROLLER FURLING
    Murrays Sports
    TIGER LOW FORESTAY ROLLER FURLING 5/32- BLACK
    Murrays Sports
    Tiger Main Headboard Murrays Part# 50-F20041750 Hobie® factory replacement headboard for Tiger main sail.
    TIGER MAIN HEADBOARD
    Hobie
    Tiger Shroud 5/32" Roller Swaged Black Wire Murrays Part# 002-6005-12 Single black shroud for Hobie® Tiger is hydraulically swaged to be clean and strong. Constructed to factory specifications. Hobie® Part# 70792011
    TIGER SHROUD 5/32" ROLLER SWAGED BLACK WIRE
    Murrays Sports
    TIGER TRAMPOLINE WITH CURVED SIDES-BLACK
    Murrays Sports
    Tiger Upper Forestay Roller Furling 5/32" Bare Wire Murrays Part# 002-6035-02 Upper forestay for Hobie® Tiger with roller furling setup does not include swivel.
    TIGER UPPER FORESTAY ROLLER FURLING 5/32" BARE WIRE
    Murrays Sports
    TILLER ARM SWIVEL END CAP Hobie factory tiller arm swivel end cap for Hobie 20 Miracle rudder system 1953. Hobie part number 40650001
    Hobie 1953 tiller connection kit - new style
    TILLER ARM END CAP SWIVEL
    Hobie
    Tiller Connection Kit Murrays Part# 001-2061 The Murrays Tiller Connection Kit assures consistent rudder alignment through the full rudder sweep. Spring-loaded half balls and contoured spacers take the slop out of the tiller-to-crossbar connection on Hobie Cats. Racing class legal. Each kit contains 2 connectors to join the tiller crossbar to the tiller arms. Compare to Hobie Cat® #3052. Applications:; Hobie 14, 16, 17, 18, 18SX
    Hobie, Nacra, Prindle Tiller Connection Kit Murrays Part# 001-2061 The Murrays Tiller Connection Kit assures consistent rudder alignment through the full rudder sweep. Spring-loaded half balls and contoured spacers take the slop out of the tiller-to-crossbar connection on Hobie Cats. Racing class legal. Each kit contains 2 connectors to join the tiller crossbar to the tiller arms. Applications:  Hobie 14, 16, 17, 18, 18SX Sold in pairs Compare to Hobie Cat® Part#
    TILLER CONNECTION KIT (PR)
    Murrays Sports
    H14 Tiller Crossbar-Black Murrays Part# 50-10520011 Tiller crossbar for Hobie 14. Hobie Part# 10520011
    TILLER X-BAR H14 BK
    Hobie
    TILLER XBAR GETAWAY os
    Hobie
    Murrays Part# 001-0062 Replacement tiller yoke assembly for all hiking sticks sold by Murrays. Used to connect the tiller extension to the tiller crossbar. Includes two contoured spacers that provide a solid platform for the yoke to sit on. Compare to Hobie Cat® Tiller yoke assembly #3205 or NACRA connection part tiller/joystick #31072 Applications: All Hobies and Prindles Tiller Yoke Assembly: 1
    Tller connection kit - yoke assembly - Hobie, Nacra, Prindle
    TILLER YOKE ASSEMBLY WITH SPACERS
    Murrays Sports
    Titanium Hydrofoil Track Lock Universal Track Nut Murrays part# 55-0030T The Only Titanium Universal Track Nut! These track nuts lock into position with a set screw, setting them apart from other track nuts on the market. They were designed to be used with any foil board track and are made from 100% GR5 Titanium so corrosion will never be an issue. They are designed to work with any foil system whether it uses m6 or m8 hardware. The Track Lock Universal track Nut comes with both M6 and M8 threaded screw
    TITANIUM HYDROFOIL TRACK LOCK UNIVERSAL TRACK NUT (4)
    Misc
    Titanium M6 T-Nut
    TITANIUM M6 T-NUT: HYDROFOIL MAST TRACK INSERTS
    Misc
    M8 T-Nuts: Titanium Hydrofoil Mast Track Inserts
    TITANIUM M8 T-NUT: HYDROFOIL MAST TRACK INSERTS
    Misc
    Toggle Strap 12"-24" Murrays Part# 13-1020 Our handy toggle strap secures items with circumferences from 12" to 24". It is constructed of 1/8" shock cord that is secured with a 1-1/8" end stop. Sold individually Compare to Hobie Cat® Part# 370
    TOGGLE STRAP 12" - 24"
    Murrays Sports
    KONA Rudder/Foil for Torqeedo 2.0/4.0 Murrays Part# 80-0200 KONA Rudder/Foil. Increase steering control and maneuverability of the KONA Deck Boat when added to your Torqeedo electric motor. No holes to drill.
    TORQEEDO 2.0/4.0 KONA RUDDER FOIL
    Torqeedo
    TORQEEDO CHARGER 402UL
    Torqeedo
    Torqeedo Fuse 58V-125A Murrays Part# 71-0190 This fuse is a replacement part for Torqeedo 2.0 and 4.0 motors and is a part of the battery connection cable.
    TORQEEDO FUSE 58V-125A
    Torqeedo
    Recently viewed