In Stock

In Stock

2261 products

    Everything Murrays Marine carries, all in one place.  Catamaran parts, Kiteboarding and wing foiling central. Use the filters on the side or the search up top to refine your search.

    2261 products
    Hobie Wave Spinnaker Murrays Part# 50-38999052 Spinnaker sail for the Hobie Wave. Colors vary. This is the sail only. Hobie Part# 38999052
    WAVE SPINNAKER
    Hobie
    WAVE TRAMPOLINE LACING KIT
    Murrays Sports
    Wave Trampoline Lacing Rod 49" Murrays Part# 50-38881011 Hobie® factory lacing rod for Wave Classic trampoline. Hobie Part# 38881011
    WAVE TRAMPOLINE LACING ROD 49"
    Hobie
    Wave Trampoline Tension Wire Murrays Part# 50-38970051 This is the wire that goes through the side of a Hobie Wave Classic trampoline and hooks into the hooks on the hulls to tension the tramp.
    WAVE TRAMPOLINE TENSION WIRE
    Murrays Sports
    Wave Trapeze Wire BK (2) The basic trapeze assembly is constructed to factory specifications and includes two coated trapeze wires 3/32" (1x19) with nylon handles and a thimble at each end. Wires end just below handles. Order shock cord and adjustment kits separately. A trapeze adjustment kit (#01-1121 or 01-1140, purchased separately) may be added to wire with no installation charge! Check box when ordering and wire length will be adjusted accordingly.
    WAVE TRAPEZE BLACK WIRE (2)
    Murrays Sports
    Hobie Wave Lower Pintle Murrays Part# 50-38101401 Hobie® factory replacement lower pintle for Wave or Bravo or Getaway Pre-EZ Loc Rudder Systems. Lower pintle assembly for Hobie Wave sailboat. Original Equipment on all Hobie Wave sailboats. Lower pintle should be mounted with four (4) screws. Use Part # 8030171 for boats 2008 and older, or Part # 8030331 for 2009 and newer. Hobie Cat Part # 38101401
    WAVE WAVE/GETAWAY LOWER PINTLE - PRE EZ LOC
    Hobie
    Wave/Getaway Shroud Anchor Plate Murrays Part# 50-39100011 Hobie® factory replacement shroud anchor chain plate for Club Wave or Getaway. The Club Wave has a three-piece trampoline and shrouds and bridles connect with clevis pins. Current boats use two plates per side. Hobie Part# 39100011
    WAVE/GETAWAY SHROUD ANCHOR PLATE
    Hobie
    Spare Parts Kit: Hobie Wave and Getaway, Hobie part number 30308
    WAVE/GETAWAY SPARE PARTS KIT
    Murrays Sports
    Welded "S" Hook Murrays Part# 56-9650 ​Welded stainless “S” hook for all older Nacras. Performance Sports factory item# 9650
    WELDED "S" HOOK
    Murrays Sports
    WELDED STAINLESS STEEL RING 3/16"x3/4"
    Misc
    Folding Anchor 3.5 LB Murrays Part# 24-2311 Collapsible anchor is constructed of corrosion-resistant galvanized iron and conveniently fits through a 4" port hole. Weighs 3.5 lb.
    WEST MARINE FOLDING ANCHOR 3.5 LB
    West Marine
    Liquid Rope Whipping-Clear Murrays Part# 40-8490 Use Liquid Rope Whipping for a quick and easy way to finish any rope end. Prevents unraveling and forms a permanent, clear flexible coating. Excellent for synthetic and manila ropes. Liquid Rope Whipping can also be used instead of a luff batten cap. Just dip the end of the batten to form a permanent, clear, flexible vinyl coating. 4 fl. oz.
    WEST MARINE LIQUID ROPE WHIPPING-CLEAR
    West Marine
    West Marine Silicone Sealant-Clear Murrays Part# 40-8018 A mildew-resistant, non-sagging, moisture-curing silicone rubber sealant that remains flexible and has excellent resistance to the marine environment. Adheres to bare and painted metal, fiberglass, glass, non-oily woods, many plastics and abraded rubber. Clear sealant comes in a 3-oz. tube. Hobie Cat® uses Part# 376
    WEST MARINE SILICONE SEALANT-CLEAR
    West Marine
    West System Epoxy Resin 1 Quart Murrays Part# 40-4103-1 West System 105 Epoxy Resin is the key component in a wide variety of boatbuilding, restoration, and repair projects. It is the base material of the West System family of products on which all of the West System compounds are built.
    WEST SYSTEM 105 EPOXY RESIN 1 QUART
    West Marine
    West System 205 Fast Hardener Murrays Part# 40-4103 West System 205 Fast Hardener® is a medium-viscosity epoxy curing agent. It is used in a majority of situations, at lower temperatures and to produce a rapid cure that develops its physical properties quickly at room temperature. When mixed with West System 105 Resin (#40-4103) in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating
    WEST SYSTEM 205 FAST HARDENER 7OZ
    West Marine
    West System 410 Microlight Filler 2oz Murrays Part# 40-4107 West System 410 Microlight Fairing Filler thickens resin and makes it into a less-dense putty form that is better for making certain repairs. Add more filler to make the epoxy thicker. Use with West Systems Epoxy Resin (#40-4103). 2 oz.
    WEST SYSTEM 410 MICROLIGHT FILLER 2OZ
    West Marine
    West System Plastic Boat Repair Kit with G/Flex Murrays Part# 40-6508 West System Plastic Boat Repair Kit G/Flex repairs plastic canoes, kayaks and inflatables made from HDPE, LDPE, ABS, PVC or polycarbonate plastic with the contents of this West System kit. The Plastic Boat Repair Kit features plastic-friendly G/flex 655 epoxy, and is assembled with the do-it-yourselfer in mind.
    WEST SYSTEM PLASTIC BOAT REPAIR KIT WITH G/FLEX
    West Marine
    West System Small Repair Kit Murrays Part# 40-4101 This West System Handy Repair Pack contains everything you need to complete small repairs around the boat, shop or home, and is perfect for ding repairs. The kit contains two West System 105 Resin/205 Hardener packets, and enough high-density filler to complete a variety of coating and bonding operations.
    WEST SYSTEM SMALL REPAIR KIT
    West Marine
    West Systems Epoxy 1 Quart with Hardener Murrays Part# 40-4103 The West Systems Epoxy QT w/ Hardener is a combination of 105 Epoxy Resin and 205 Hardener. It is used for shops and/or bigger jobs and lamination work. The resin is a clear, pale yellow, low-viscosity liquid epoxy resin that cures to a hard, solid plastic with superior physical properties. The optional mini pumps (#40-4104) screw onto the resin and hardener to make dispensing and 5:1 metering easy and automatic.
    WEST SYSTEMS EPOXY WITH HARDENER
    West Marine
    West Systems G/ Flex Thickened Epoxy Murrays Part# 40-6558 West Systems G/ Flex Thickened Epoxy is two 4 oz tubes. One of the 4 oz tubes is Resin, and the other 4 oz tube is Hardener. The Thickened Epoxy quickly builds up thickness and will not run or sag. It permanently bonds fiberglass, ceramics, metals and plastics. It adheres tenaciously to difficult-to-bond woods including resinous woods and even wet wood.
    WEST SYSTEMS G/FLEX THICKENED EPOXY
    West Marine
    West Systems Universal Epoxy Pumps Murrays Part# 40-4104 These pumps screw onto West System epoxy resin and hardener to make dispensing and 5:1 metering easy and automatic. Made of durable polypropylene, the pumps give years of dependable service. Read and follow the priming, ratio verification and operating instructions that come with the pumps
    WEST SYSTEMS UNIVERSAL EPOXY PUMPS
    West Marine
    WETA FORESTAY 3/32 BARE
    Murrays Sports
    WETA SHROUD 3/32" BLACK
    Murrays Sports
    Robline waxed whipping twine
    WHIPPING TWINE - WHITE SPOOL
    Robline
    Wichard Quick Release Snap Shackle with Swivel Eye Murrays Part# 27-2673 Wichard Snap Shackles are forged in High Resistant 17-4PH (HR) Stainless Steel. Wichard snap shackles will never break suddenly! They show signs of deformation well before reaching the breaking point.
    WICHARD QUICK RELEASE SNAP SHACKLE WITH SWIVEL EYE
    Wichard
    Rudder Pin Wild Cat Murrays Part# 50-F18780330
    WILD CAT RUDDER PIN
    Hobie
    WILDCAT F18 DOUBLE TRAPEZE (4HANDLES)
    Murrays Sports
    Wind Vane Replacement Tips and Washers  Coffee Marine Wind Vane Tip and Washer kit that fits the original Coffee Marine Bridle Vane and the Hobie Standard Bridle Vane. These are easy to knock off or misplace. Stash a couple in your tool box and never be without your trusty Bridle Fly! 
    WIND VANE REPLACEMENT TIPS & WASHERS
    Murrays Sports
    Windsurf Adjustable Outhaul Kit Murrays Part# 001-9520 Racers and recreational windsurf sailors can adjust outhaul tension "on the fly" for maximum power or speed: Low gear: Loosen outhaul tension to "power-up" to get going, even in light wind. Shift to drive: Tighten outhaul to flatten sail for more speed as you get onto a plane and/or more efficiency when heading upwind. Adjust the outhaul (sail shape) from either side, at any time.
    WINDSURF ADJUSTABLE OUTHAUL KIT
    Murrays Sports
    WING CAST FRONT H17 BK
    Hobie
    Wing Mount Bar 2 x 1/2" Murrays Part# 19-0020 5/16-18" Hole
    WING MOUNT BAR 2.5 x 1/2"
    Murrays Sports
    WING MOUNT KIT (1 EACH) Murrays PN 50-65071001 Hardware mounting kit for Hobie 18 Magnum and SX wings.  Includes: 2 x Wing Slug - Threaded post 2 x 5/16 -18 threaded nylock nuts 2 x 5/16 -18 Socket Screw
    WING MOUNT KIT (1 EACH) 65071001 Hardware mounting kit for Hobie 18 Magnum and SX wings.  Includes: 2 x Wing Slug - Threaded post 2 x 5/16 -18 threaded nylock nuts 2 x 5/16 -18 Socket Screw
    WING MOUNT KIT (1 EACH)
    Murrays Sports
    Wire 1/16" 7X7 Bare 304 Stainless Steel Murrays Part# 002-0022 304 stainless steel cable is the industry standard for marine rigging applications due to its high strength and corrosion resistance. 7x7 cable is flexible and ideal for Hobie, Nacra and Prindle halyards.
    WIRE 1/16" 7X7 BARE 304 SS
    Murrays Sports
    316 stainless steel cable is the gold standard for marine rigging applications due to its high strength and corrosion resistance. 1x19 cable is rigid, resists kinking, and has an extremely high load bearing capacity. Ideal for manufacturing long lasting bridals, shrouds and stays. Features 316 Stainless Steel Stiff and Low Stretch Highly Polished for Marine Use One Strand Consisting of 19 Wires Sold by the foot
    WIRE 1/8" 1X19 BARE 316 SS
    Misc
    316 stainless steel cable is the gold standard for marine rigging applications due to its high strength and corrosion resistance. 1x19 cable is rigid, resists kinking, and has an extremely high load bearing capacity. PVC coating increases UV and abrasion resistance. Price sold by the foot
    WIRE 1/8" 1X19 BLACK COATED
    Misc
    Wire 1/8" 1X19 White Coated Murrays Part# 002-0041W 316 stainless steel cable is the gold standard for marine rigging applications due to its high strength and corrosion resistance. 1x19 cable is rigid, resists kinking, and has an extremely high load bearing capacity. PVC coating increases UV and abrasion resistance. Features 316 Stainless Steel Stiff and Low Stretch Highly Polished for Marine Use One Strand Consisting of 19 Wires White PVC Coated Sold by the foot
    WIRE 1/8" 1X19 WHITE COATED
    Misc
    Wire 1/8" 7X19 Bare 304 Stainless Steel 304 stainless steel cable is the industry standard for marine rigging applications due to its high strength and corrosion resistance. 7x19 cable is flexible and ideal for Hobie, Nacra and Prindle halyards. Features 304 Stainless Steel Flexible and Low Stretch Highly Polished for Marine Use 7 groups of 19 strands Sold by the foot
    WIRE 1/8" 7X19 BARE 304 SS
    Misc
    316 stainless steel cable is the gold standard for marine rigging applications due to its high strength and corrosion resistance. 1x19 cable is rigid, resists kinking, and has an extremely high load bearing capacity. Ideal for manufacturing long lasting bridals, shrouds and stays. Features 316 Stainless Steel Stiff and Low Stretch Highly Polished for Marine Use One Strand Consisting of 19 Wires Sold by the foot
    WIRE 3/32" 1X19 BARE SS
    Misc
    Wire 3/32" 1X19 Black Coated 316 stainless steel cable is the gold standard for marine rigging applications due to its high strength and corrosion resistance. 1x19 cable is rigid, resists kinking, and has a extremely high load bearing capacity. PVC coating increases UV and abrasion resistance. Price sold by the foot
    WIRE 3/32" 1X19 BLACK COATED
    Misc
    WIRE 3/32" 1X19 WHITE COATED
    Misc
    Recently viewed