In Stock

In Stock

2273 products

Everything Murrays Marine carries, all in one place. Catamaran parts, Kiteboarding and wing foiling central. Use the filters on the side or the search up top to refine your search.

2273 products

Sort

Screw RHMS 1/4-20 X 1/2"
Stainless Steel

Murrays Part# 19-3019

Stainless steel, Phillips pan head 1/4-20 x 1/2" machine screw is used to fasten mast bearing on post-1990 Hobie® 18.

Compare to Hobie 8032011

SCREW RHMS 1/4-20 X 1/2" (SS)

Screw RHMS 5/16-18 X 1.25" Stainless Steel

Murrays Part# 19-3530

Stainless steel round head machine screw measures 5/16-18 x 1-1/4". Bow Tang Bolt

Equivalent to Hobie Cat® Part# 8030301

SCREW RHMS 5/16-18 X 1.25 (SS)

Screw RHSMS #10 X 1.25"
Stainless Steel

Murrays Part# 19-3710

Round head self-tapping #10 x 1.25" stainless steel sheet metal screw.

SCREW RHSMS #10 X 1.25" (SS)

Screw RHSMS #10 X 1.50"
Stainless Steel

Murrays Part# 19-3711

Round head self-tapping #10 x 1.50" stainless steel sheet metal screw

SCREW RHSMS #10 X 1.50 (SS)

Screw RHSMS #10 X 2 (Stainless Steel)
Murrays Part# 19-3713
Round head, self-tapping #10 x 2" stainless steel sheet metal screw.

SCREW RHSMS #10 X 2 (SS)

Rhsms #10 X 2.50 Stainless Steel

Murrays Part# 19-3714

Round head, self-tapping #10 x 2.5" stainless steel sheet metal screw

SCREW RHSMS #10 X 2.50" (SS)

SCREW STAINLESS STEEL #10 x 3/4 PHSM-PH

Screw 1/4-20 x 1" THMS-P SS

Murrays Part# 50-8030701

Hobie® factory replacement 1/4-20 x 1" stainless steel screw. Used on Hobie® pre-EZ-Loc rudder system, tendon tiller connector, rudder adjuster, Hobie 20 shroud anchor plate.

Applications:

H18/ Hobie 18 SX
Rudder Adjuster Screw: 1

Compare to Hobie Part# 8030701

SCREW STAINLESS STEEL 1/4-20x1"

Screw THMS 1/4-20 X 1-5/8"

Murrays Part# 50-8030601

Hobie® factory replacement 1/4-20 x 1-5/8" screw.

Hobie Part# 8030601

SCREW THMS 1/4-20 X 1-5/8"

SELF TACKING CLEW PLATE KIT

The Selma fid (needle) is the only tool for splicing all kinds of rope. Selma fids are made of highly polished stainless steel. Made in Norway and patented worldwide.

Please note that the appropriate fid size will depend on the type and construction of line. The purchase of a set of 4 or 5 fids may be a better option if you are unsure of the fid size you need.

SELMA FID 10mm 3/8-1/2"

The Selma fid (needle) is the only tool for splicing all kinds of rope. Selma fids are made of highly polished stainless steel. Made in Norway and patented worldwide.

Please note that the appropriate fid size will depend on the type and construction of line. The purchase of a set of 4 or 5 fids may be a better option if you are unsure of the fid size you need.

SELMA FID 13mm 1/2-9/16"

The Selma fid (needle) is the only tool for splicing all kinds of rope. Selma fids are made of highly polished stainless steel. Made in Norway and patented worldwide.

Please note that the appropriate fid size will depend on the type and construction of line. The purchase of a set of 4 or 5 fids may be a better option if you are unsure of the fid size you need.

SELMA FID 4.0mm 1/8-1/4"

The Selma fid (needle) is the only tool for splicing all kinds of rope. Selma fids are made of highly polished stainless steel. Made in Norway and patented worldwide.

Please note that the appropriate fid size will depend on the type and construction of line. The purchase of a set of 4 or 5 fids may be a better option if you are unsure of the fid size you need.

SELMA FID 5.5mm 1/4-5/16"

The Selma fid (needle) is the only tool for splicing all kinds of rope. Selma fids are made of highly polished stainless steel. Made in Norway and patented worldwide.

Please note that the appropriate fid size will depend on the type and construction of line. The purchase of a set of 4 or 5 fids may be a better option if you are unsure of the fid size you need.

SELMA FID 7.5mm 5/16-3/8"

Selma_fid-kit x4 4.5mm-10mm

SELMA ROPE SPLICE FIDS x4

Selma_fid_kit 4.5mm-13mm

Selma Fid kit packaging

SELMA ROPE SPLICE FIDS x5

SERIES 19 JIB SHEET & TRAVELER UPGRADE

Shackle Pin Only 1/4 Threaded
Murrays Part# 21-0033
Threaded stainless pin fits 1/4" Ronstan D or bow shackle.

SHACKLE PIN ONLY 1/4" THREADED

Shackle Pin Only 3/16 Threaded
Murrays Part# 21-0032
Threaded stainless pin fits 3/16" Ronstan D or bow shackle.

SHACKLE PIN ONLY 3/16" THREADED

Shock Cord Pliers 

Murrays Part# 33-0010

Close stainless cinch rings completely without burring. These shock cord pliers are for all cinch rings up to 1/2". Made of plated, case-hardened steel with a spring grip. Hobie Cat® uses #83104 for this item.

SHOCK CORD PLIERS

Shroud Stay Adjuster 7 Hole

Murrays Part# 25-3310

Stainless steel shroud adjuster with seven 1/4" holes.

Use #22-9802 clevis pin at top and #22-9808 at bottom.

Fits: H14/16/18/20, Wave and Getaway.

Compare to Hobie Part# 20830010
Nacra - Prindle part number 9893

SHROUD STAY ADJUSTER 7-HOLE

SHROUD TENSIONER

SHROUD TENSIONER/DE-TENSIONER

SIDEWINDER BECKET

SINGLE SHANK BALL STOP 3/32"

Single Wire Block With Shackle

Murrays Part# 22-3302

This single wire block can be used to replace the jib halyard block on Nacra 5.2, Performance part 9896.

SINGLE WIRE BLOCK WITH SHACKLE

Schaefer Marine

SISTER CLIP MICRO (EA)

SK78 Dyneema Whipping Twine

Murrays Part# 21-WD1R

Dyneema® whipping twine excels mostly due to its high breaking loads and smooth surface. It is easy to handle and requires no additional waxing.

Specifications:

Material: Dyneema® SK78
Diameter: 1 mm
Length: 50 m
Color: Red

SK78 DYNEEMA WHIPPING TWINE

SK78 MINI DYNEEMA SPOOL 2MM

SK78 Mini Spool 3mm Dyneema Lashing Line

The SK78 Mini Spool 3mm- Robline Dyneema good for any small boat kit…. for tying. lashing, lanyards, pigtails etc. Easily spliced with a small Selma Fid or a D Splicing tool.

Honeywell International produces a similar line, marketed as Spectra®

Identical to Ocean 3000 XG, but on a smaller spool, this rope is made of pure Dyneema SK78 and treated with FSE Robline’s S.Y.I.S. coating technology.
Dyneema SK78 has the same high strength of SK75, but with lower creep

SK78 MINI DYNEEMA SPOOL 3MM

SLINGSHOT 1-PUMP TUBES AND CLIPS

Slingshot Pigtails
Murrays part# 54-6013
Replacement pigtails with foolproof connections help prevent wear and tear on your lark's heads. Easy to pull off, saving teeth and nails. Line/bar pigtails are pictured.
Sold in a package of 4

SLINGSHOT PIGTAILS (BAR)

SLINGSHOT PIGTAILS (KITE)

SMALL BLOCK W/REMOVABLE SHEAVE

This small block is used on trapeze adjustment systems where the removable sheave enables installation without cutting wires.

Specifications: 1-3/16" removable sheave, Teflon® bearing and 5/16" line capacity.

Hobie item #3103

SMALL BLOCK W/REMOVABLE SHEAVE

This small block is used on trapeze adjustment systems where the removable sheave enables installation without cutting wires.

Specifications: 1-3/16" removable sheave, Teflon® bearing and 5/16" line capacity.

Hobie item #3103

SMALL BLOCK WITH REMOVABLE SHEAVE

SMOOTH SAILING RIG TENSION KIT - WAVE
Murrays PN 001-2075
The modern flopper stopper for the discerning Formula Wave Class Sailor. This kit loads up the forestay rather than pulling in on the bridles, to give you better leverage and a more consistent pull.

MURRAYS SMOOTH SAILING RIG TENSION KIT - HOBIE WAVE

SMOOTH SAILING RIG TENSION KIT - WAVE

Snap Hook #1 (Bronze)

Murrays Part# 27-3461

Die cast manganese bronze snap hook measures 2-7/8" overall with 11/16" diameter hole and 1/4" opening. Weight: .05 lb.

SNAP HOOK #1 (BRONZE)

Snap Shackle with Swivel Eye

Murrays Part# 22-4521

2-3/4" long stainless steel snap shackle with swivel eye has 1/2" diameter eye. SWL 1000 lbs. Weighs 2.4 oz.

SNAP SHACKLE WITH SWIVEL EYE

Snap Shackle With Tack 1/4"

Murrays Part# 22-4501

Swiveling tack shackle with 1/4" clevis pin. Use on hexaratchets on Hobie® 18, Nacra or Prindle. To connect the swivel shackle to an item that requires a 3/16" clevis pin, you will need a 3/16" clevis pin with 7/8" shaft. Also convenient for the jib tack connection on Nacras and Inters.

SNAP SHACKLE WITH TACK 1/4"

Snuffer Sock Mid Pole

Murrays Part# 56-9711

A snuffer funnels the spinnaker into the sock to facilitate launching and retrieval, even while sailing a triangular course. Keeps the tramp clean. This snuffer sock holds sail when not in use. Made with lightweight waterproof sail material a neoprene patch under the opening for added stretch and abrasion resistance.

SNUFFER SOCK MID POLE

10-24 x 1/2 Socket Head Screw

Murrays Part# 13-1226

SOCKET HEAD SCREW 10-24 x 1/2"

Previous 1 … 49 50 51 52 53 … 57 Next

Recently viewed

In Stock