In Stock

In Stock

2397 products

    Everything Murrays Marine carries, all in one place.  Catamaran parts, Kiteboarding and wing foiling central. Use the filters on the side or the search up top to refine your search.

    2397 products
    Rivet 6-18 Aluminum RIVET POP 3/16 x 1 1/8th inch aluminum rivet to hold the traveler control sheave on a H16 front crossbar from late 90s to current. Hobie Part Number 8011251
    RIVET 6-18 ALUMINUM
    Hobie
    Rivet AAC 3/16 x 5/8 CSK Murrays Part# 50-8010171 Hobie® factory aluminum 3/16" x 5/8" countersunk rivet requires a rivet tool for installation.
    RIVET AAC 6-10 3/16x5/8 CSK
    Hobie
    Rivet AAP 6-10 (3/16 X 5/8) Murrays Part# 19-5014 A rivet gun is required for installation of this 3/16" x 5/8" aluminum pop rivet
    RIVET AAP 6-10 (3/16 X 5/8)
    Misc
    Rivet AAP 6-4 (3/16 X 1/4) Murrays Part# 19-5011 A rivet gun is required for installation of this 3/16" x 1/4" aluminum pop rivet.
    RIVET AAP 6-4 (3/16 X 1/4)
    Misc
    Rivet AAP 6-6 (3/16 X 3/8) Murrays Part# 19-5012 A rivet gun is required for installation of this 3/16" x 3/8" aluminum pop rivet.
    RIVET AAP 6-6 (3/16 X 3/8)
    Misc
    Hobie rivet casings sleeves seal rivets to prevent water penetration. When used with a rivet they seal the hole to prevent water from getting through the center of the rivet. Rivet Casings are recommended for use on all rivets on the mast to keep the mast water tight. Compatible with all 3/16 diameter rivets up to 5/8" long. Compatible with all rivets on Hobie, Nacra and Prindle catamarans except traveler tracks. Requires 13/64" hole. Hobie part number 8011291, 8011290, also called rivet cap.
    RIVET CASING 6-10(3/16 X 5/8)
    Hobie
    RIVET CCC 6-4 (3/16 X.25 CSK) Murrays Part# 19-5021 This size stainless steel countersunk rivet. 002-1041 stop sleeve is helpful for track instillation as a spacer to fit into the track to help get the rivet flush.
    RIVET CCC 6-4 (3/16 X.25 CSK)
    Misc
    Rivet CCC 6-6 (3/16 X 3/8) Countersunk Murrays Part# 19-5024 Countersunk stainless steel 3/16" x 3/8" rivet for traveler tracks, etc. Compare to Hobie Part # 8010201. This rivets is what Hobie recommends for both the main traveler tack and the jib traveler track. We also recommend using an 1/8" stop sleeve, part number 002-1041, as a spacer to help you apply pressure on the rivet inside the track, as the track is too narrow for most rivet guns to get far enough inside to apply pressure to the rivet.
    RIVET CCC 6-6 CSK
    Misc
    Rivet CCC 6-8 CSK 18-8 Murrays Part# 19-5026
    RIVET CCC 6-8 CSK 18-8
    Misc
    Rivet CCP 4-6 (1/8 X 3/8) Murrays Part# 19-5030 Stainless steel 1/8" x 3/8" rounded pan head rivet.
    RIVET CCP 4-6 (1/8 X 3/8)
    Misc
    Rivet CCP 6-10 (3/16 X 5/8) Murrays Part# 19-5034 Stainless steel 3/16" x 5/8" rounded pan head rivet. Compare to Hobie Cat® #8010121. Halyard mast cleat rivet
    RIVET CCP 6-10 (3/16 X 5/8)
    Misc
    Rivet CCP 6-4 (3/16 X 1/4) Murrays Part# 19-5031 Stainless steel 3/16" x 1/4" rounded pan head rivet. Compare to Hobie Cat® #8010181. This is a common rivet used on many extrusions. Hobie, Nacra, Prindle masts and booms. Pair with a rivet casing to seal the rivet hole when used on masts. All Hobie mast hounds, tangs, heads, and cheek blocks. Used with Hobie Getaway Bow Spreader Plates Used on Hobie Getaway FWD and REAR Crossbar Stop Plates
    RIVET CCP 6-4 (3/16 X 1/4)
    Misc
    RIVET CCP 6-6 (3/16 X 3/8) Murrays Part# 19-5032 Stainless steel 3/16" x 3/8" pan head rivet Among other uses, the Stainless steel 3/16" x 3/8" pan head rivet can be used when Hobie® rivet #8010131 is specified: Hobie 14 (2) or 16 (4) mast head Hobie Wave/Getaway/14/16/17/18/18SX/ mast base (4) Hobie 14/16 rudder upper casting (2) Hobie 14/16 tiller end cap (2) Hobie 14/16 boom front end cap (3) Pair with stainless steal rivet casings to seal the holes when using on the mast.
    RIVET CCP 6-6 (3/16 X 3/8)
    Misc
    Rivet CCP 6-8 (3/16 X 1/2) Murrays Part# 19-5033 Stainless steel 3/16" x 1/2" rounded pan head rivet. Compare to Hobie Cat® #8011231.
    RIVET CCP 6-8 (3/16 X 1/2)
    Misc
    Hobie Cat 8010181 Rivet
    RIVET CCP SEALED 6-4 (3/16 X 1/4)
    Misc
    Sealed Stainless Steel 3/16" x 3/8" Pan Head Rivet Murrays Part# 19-5032S Sealed rivets have a sealed end that does not require rivet casings to make them water tight. One and done, no casing needed, just insert and pop as you would a normal rivet, and your hole will be sealed. Among other uses, the Stainless steel 3/16" x 3/8" pan head rivet can be used when Hobie® rivet #8010131 is specified: Hobie 14 (2) or 16 (4) mast head Hobie Wave/Getaway/14/16/17/18/18SX/ mast base (4) Hobie 14/16
    RIVET CCP SEALED 6-6 (3/16 X 3/8)
    Misc
    Sealed Rivet CCP 6-8 (3/16 X 1/2) Murrays Part# 19-5033S Sealed rivets have a sealed end that does not require rivet casings to make them water tight. One and done, no casing needed, just insert and pop as you would a normal rivet, and your hole will be sealed. Sealed Stainless steel 3/16" x 1/2" rounded pan head rivet. Compare to Hobie Cat® #8011231 Rivet and Hobie Cat® #8011291 rivet casing.
    RIVET CCP SEALED 6-8 (3/16 X 1/2)
    Misc
    Rivet MCP 6-6 (3/16 X 3/8) Murrays Part# 19-5022 Rounded pan head 3/16" x 3/8" Monel rivet. Compare to SS version Hobie Cat® #8010131.
    RIVET MCP 6-6
    Misc
    RIVET MCP 6-8 3/16x1/2" PH Murrays Part# 50-8011231 Hobie® factory 6-8 heavy duty rivet requires a rivet tool for installation. 3/16" x 1/2" pan head. Fits Hobie Getaway Eyelet Post. Fits Hobie 20 Eyelet Post. Mounts Wave Mast Step Hobie part number 8011231
    RIVET MCP 6-8 3/16x1/2" PH
    Hobie
    Rivet MCP 8-6 (1/4 x 3/8) Murrays Part# 19-5042 Rounded pan head 1/4" x 3/8" Monel rivet.
    RIVET MCP 8-6 (1/4 x 3/8)
    Misc
    Rivet MSP 6-10 3/16 X 5/8" PH Murrays Part# 19-5023 Rounded pan head 3/16" x 5/8" Monel rivet. Compare to Hobie Cat® Part# 8010121
    RIVET MSP 6-10 3/16 X 5/8" PH
    Hobie
    Rivet Semi 3/16x27/32 Stainless Steal Murrays Part# 50-8012062
    RIVET SEMI
    Hobie
    Rivet Solid A 4-6 (1/8 X 3/8) Murrays Part# 19-5005 Solid aluminum 1/8" x 3/8" rivet is designed to be set with a hammer.
    RIVET SOLID A 4-6 (1/8x3/8")
    Misc
    RIVET SOLID BRASS 6-6 (3/16x3/8") Solid Brass 3/16" x 3/8" rivet is designed to be set with a hammer. Commonly used to secure sail luff plates, clew plates, tack plates and headboards.
    RIVET SOLID BRASS 6-6 (3/16x3/8")
    Misc
    Rivet Washer Nylon Commonly used on NACRA catamarans to insulate the stainless rivet from aluminum extrusions. Nacra PN 40200
    RIVET WASHER NYLON
    Murrays Sports
    2mm Orion 500 Line Murrays Part# 39-2302BK Robline's 2mm Orion 500 Line is a 16-plait polyester cover and its 8-plait core provide for good grip and make the rope easy to splice. The ideal choice for all cruising enthusiasts. Features Versatile, easily handled and easily spliced polyester double braid is ideal for use as control lines, lashing and dozens of other uses aboard. Best Use: Control lines, tie downs and general lashing Construction: Double braid Cover Fiber/Construction: 16-plait
    ROBLINE 2mm ORION 500 CONTROL LINE
    Robline
    Ronstan Small Soft Shackle - 4mm SK78 Murrays Part# 21-DSH4 The Robline Small Soft Shackle is a great alternative to the metal shackle, with no clevis pins to loose in the water or sand. Soft shackles are also very easy on the boat as they are soft and flexible Quick and easy way to attach jib clew blocks to the jib and the main sheet blocks to the main sail.
    ROBLINE 4MM SMALL SOFT SHACKLE SK78
    Robline
    DYNEEMA SK78 12-STRND 3mm GRAY
    ROBLINE OCEAN 3000 DYNEEMA SK78
    Robline
    9mm Robline Racing Pro is ideal for use on all Hobie, Nacra and Prindle catamarans as well as many dingy classes including 49er, 29er, 420, Laser, and RS Feva. Great for use as a Main sheet, Jib sheet, or spin sheet.
    ROBLINE RACING PRO 9mm (23/64")
    Robline
    ROBLINE SK78 1.6MM KITE LINE 60M SPOOL
    Robline
    ROBLINE SK78 1.8mm Kite Line was designed with kiters in Capetown South Africa to be the ultimate line for kiters boosting in high winds. The commitment level in Capetown is high and they ride large kites in high winds and then send it which loads the lines with multiple G-Forces. That is why they need to be able to trust that they have the strongest lines. The Dyneema® SK78 is super high strength and more durable than SK99, it has better chafe resistance properties
    ROBLINE SK78 1.8MM KITE LINE 30M SPOOL
    Robline
    ROBLINE SK99 1.1MM KITE LINE 60M SPOOL
    Robline
    The ROBLINE SK99 1.3mm Kite Line Mini Reel is made from Robline's new Garda SK99 Dyneema that was specifically designed for kite foil racing. It is built for pure performance it is as narrow, strong and light as possible for the least drag, best kite control and immediate power delivery. Garda SK99 is incredibly lightweight, UV stable, easily to splice, and has virtually no elongation or shrinking.
    ROBLINE SK99 1.3MM KITE LINE 60M SPOOL
    Robline
    ROBLINE SMALL SOFT SHACKLE- 6MM SK78
    Robline
    ROBLINE SMALL SOFT SHACKLE-2.5MM SK78
    Robline
    Robline Small Soft Shackle - 4mm SK78 Murrays Part# 21-DSH9 The Robline Small Soft Shackle is a great alternative to the metal shackle, with no clevis pins to loose in the water or sand. Soft shackles are also very easy on the boat as they are soft and flexible Quick and easy way to attach jib clew blocks to the jib and the main sheet blocks to the main sail.
    ROBLINE SMALL SOFT SHACKLE-9MM SK78
    Robline
    Replacement stainless bushing for #25-3002 roller fairlead.
    ROLLER FAIRLEAD BUSHING (EA)
    Murrays Sports
    Heavy Duty Swivel with Aluminum Cam Roller Fairlead Murrays Part# 25-3020 Swivel cam cleats are ideal for main traveler control and up-release jib cleating systems. This is a Murrays product that features an Aluminum Harken 150 cam cleat, and HD swivel plate and a HD roller fairlead. The advantage to the roller fairlead is that it can take a larger line diameter, up to 1/2", and handle heavy loads at extreme angles. Making it ideal for larger catamarans and sailors in high wind areas.
    ROLLER FAIRLEAD KIT (SWIVEL)
    Murrays Sports
    Roller Fairlead Roller Murrays Part# 100-3002-4 Replacement roller for #25-3002 roller fairlead Sold Individually
    ROLLER FAIRLEAD ROLLER (EA)
    Murrays Sports
    H18 Telo-Cat/Hobie Vane Adapter Murrays Part# 008-1451 Adapts the Telo-Cat (#08-1450) or Hobie® (#04-7703) vane to the Hobie 18 furling drum. When using to adapt a Telo-Cat vane for use on a Hobie 18, it is necessary to enlarge one hole in the plastic part of the vane to accommodate a clevis pin. Hobie Cat® Part# CM7705
    ROLLER FURLER BRIDLE VANE ADAPTER
    Murrays Sports
    Recently viewed