In Stock

In Stock

2273 products

Everything Murrays Marine carries, all in one place. Catamaran parts, Kiteboarding and wing foiling central. Use the filters on the side or the search up top to refine your search.

2273 products

Sort

ROPE CUTTING TOOL W/BLADE

Rope End Stop

Murrays Part# 27-0199

This 1-1/8" diameter plastic ball has a 1/4" hole and comes in assorted colors as available. The hole on one end accommodates the stop knot.

Rope Splicing Fid Kit

Murrays Part# 001-1400

The Murrays Rope Splicing Fid Kit includes 9 fids from 1.7 to 5mm that can splice 1 - 6 mm diameter lines. It includes everything you need for small boat use. It can make tapered sheeting lines, split lines, halyards, looped ends, soft shackles, you name it. The kit includes everything you need to cut, splice and finish the job all contained in a water tight box for easy storage.

ROPE SPLICING FID KIT

Ronstan Fairlead V-Cleat for
3-6mm Line

Murrays Part# 21-5101

Ronstan's carbon-composite V-cleats are strong, lightweight and inexpensive, and are a simple solution to cleating lines under moderate loads. This cleat is great for control lines on catamarans and dinghies. A cutaway in base of fairlead cleats can be used as a becket for a 2:1 purchase system. Use with rope diameters of 1/8"-1/4". Measurement between hole centers is 1-7/8" and the cleat weighs only 0.4 oz.

ROSTAN FAIRLEAD V-CLEAT FOR 3-6MM LINE

Rotator Bolt Reinforcement Plate

Murrays Part# 56-6821

Rotator bolt reinforcement.

Performance Sports factory item# 6821

ROTATOR BOLT REINFORCEMENT PLATE

Rudder Blade EZ Lock With Indents

Murrays Part# 50-20491000

Hobie is no longer producing two different nylon rudder blades. Use this part to replace your plastic rudder blades for Hobie 14, 16, 17 and 18 beach cats. This is the standard part that comes on Hobie Wave and Hobie Getaway boats with EZ Loc rudder systems

RUDDER BLADE EZ LOCK WITH INDENTS

RUDDER CAST UPPER H18 *USED*

RUDDER HEAD (all Inters)

RUDDER PIN SPRING CLIP: 3/8

The 3/8 spring clip is a quick release pin for rudder pins on all Hobie, Nacra and Prindle Catamarans. Ideal for sailors who trailer their boats and remove their rudder castings.

RUDDER PIN SPRING CLIP: 3/8

Rudder Pins H17/18 (Nylon)

Murrays Part# 001-4271

Nylatron rudder pins are sacrificial for use in the surf (they'll break before your rudder system does) and should be inspected often for wear. These universal 3/8" x 9-1/4" nylon rudder pins are suited for all Hobie® 17/18/Wave rudder castings. Compare to Hobie Cat® #5052 fiberglass rudder pins (pair).

RUDDER PINS H-17/18 PR (NYLON)

Rudder Stiffening Kit

Murrays Part# 001-2053

The Rudder Stiffening Kit for all Hobies eliminates excessive clearances between rudders and castings which cause wobble and thwart rudder alignment. Kit has 4 stainless nylock nuts and 8 spacers. Compare to Hobie Cat® item #136.

RUDDER STIFFENING KIT

Murrays PN 001-0053

The Murrays Rudder Stiffening Spacer is a 2" diameter spacer for use on Hobie, Nacra and Prindle catamarans to eliminate excessive clearances between rudders and castings which cause rudder slop, side to side wobble, and thwart rudder alignment. A kit with spacers and nuts is also available (#01-2053).  The Murrays Rudder Stiffening Spacer are quite thin so that you can achieve a perfect fit. Standard kits come with 8 spacers.

RUDDER STIFFENING SPACER

Hobie rudder bushing. Hobie part number 8062001

RUDDER TITE BUSHING EACH

RULES IN BRIEF CARD 2021-2024

Safety Chain Keeper

S-HOOK SAFETY CHAIN KEEPER

SAFETY HASP 3-11/16" 314 SS

Safety Pin Stainless Steel

Murrays Part# 21-0126

The stainless steel safety pin is an alternative to the split ring, spring clip or cotter pin. Hobie Cat® Part# 20503

SAFETY PIN STAINLESS STEEL

SAIL "HC" LOGO U-CUT PR BLACK

SAIL NUMBER 14" U-CUT BLACK

Sail Ring Pack (30)

Sail/Kite Repair Tape – Cut the needed amount off the 25-foot, 2″-wide roll of repair tape and keep the rest handy for emergencies. The 3/4-oz. ripstop nylon is self-adhesive and easy to apply for repairs to sails and kites. Compare to Hobie Cat® #1662.

SAIL/KITE REPAIR TAPE

Screw #10 x 1-1/4 PHSMS-P

Murrays Part# 50-8030261

Tiller Hinge Screw for Hobie Fiberglass Tiller.

SCREW #10 x 1-1/4 PHSMS-P

Screw #10 x 3/4 PHSMPH

Murrays Part# 50-8031131

SCREW #10 x 3/4 PHSMPH

Screw #10X1 PHSMS-P TF-12

Murrays Part# 50-8032121

Hobie Part# 8032121

SCREW #10X1 PHSMS-P TF-12

Screw #10 x 1/2 PHSMS-P

Murrays Part# 50-8031151

Hobie Part# 8031151

SCREW #10X1/2" PHSMS-P

Screw #14 X 3/4 PHSMS

Murrays Part3 50-8031891

Hobie® factory replacement #14 x 3/4" pan head self-tapping sheet metal screw with Phillips head.

Hobie Part# 8031891

SCREW #14 X 3/4" PHMS

Screw 1/4-20 X 3/8 RHMS-P

Murrays Part# 50-8030711

Hobie® factory replacement 1/4-20 x 3/8" stainless steel round head machine screw with Phillips head. Use two on Hobie® 20 jib car.

Hobie Part# 8030711

SCREW 1/4-20 X 3/8" RHMS-P

Screw 1/4-20 x 5/8 PHMS-P Stainless Steel
Murrays Part# 50-8030331
This screw is used on the Hobie wave to secure the eye straps to the inner edge of the crossbars for connecting the tramp pulleys on the classic wave or "other" on the club version.

SCREW 1/4-20 x 5/8" PHMS-P SS

Screw 1/4/20x1.25" PHPMS

Murrays Part# 50-8032061

Rear Hatch Screw for Hobie Bravo.

Hobie Part# 8032061

SCREW 1/4-20x1.25" PHPMS

Screw 10-24 X 1.5" (Nylon)

Murrays Part# 50-8031031

Hobie® factory replacement nylon 10-24 x 1-1/2" screw is used on Hobie 18 front corner castings.

SCREW 10-24 X 1.5" (NYLON)

Screw Boom Clamp 10-24 X 1.25 FHMS-S

Murrays Part# 50-8031011

Hobie® factory replacement screw for the boom clamp (#50-61711000) on the Hobie 18. #10-24 x 1-1/4" flat head machine stainless screw with Phillips head.

Hobie Part# 8031011

SCREW 10-24x 1-1/4"

Screw 10-32 X 1-1/4" PHMSP

Murrays Part# 50-8031071

SCREW 10-32 X 1-1/4" PHMSP

Screw 10-32 x 3 PHMS Phillips Head

Murrays Part# 50-8032101

Hobie® factory #10-31 x 3" pan head machine screw with Phillips head.

Hobie Part# 8032101

SCREW 10-32 X 3 PHMS

Screw 10-32 X 2.5" PHMS

Murrays Part# 50-8032211

Hobie® factory replacement 10-32 x 2-1/2" pan head machine screw is used on Hobie 20 Miracle block hanger.

Hobie Part# 8032211

SCREW 10-32X2.5" PHMS

Screw 12-24 x 3/4 RHMS-P Stainless Steel
Murrays Part# 50-8030170
Hobie Part# 8030170

SCREW 12-24 x 3/4 RHMS-P SS

Screw 3/8-16 x 4" PHMS-P

Murrays Part# 50-8040600

This screw is for holding the wing side leg brace.

Hobie Part# 8040600

SCREW 3/8-16 x 4" PHMS-P

Screw 5/16-18 X 2.5" Socket Head

Murrays Part# 50-8032221

Hobie® factory replacement socket head screw bolt is 5/16-18 x 2-1/2". Hobie 17 and 17 Sport front and rear crossbar bolt.

Hobie Part# 8032221

SCREW 5/16 X 18 X 2.5" SOCKET HEAD

Screw Stainless Steel 5/16-18 X 2" PHMS-P

Murrays 50-8030291

Hobie® factory 5/16-18 x 2" stainless steel screw is used on Getaway spreader end cap.

Hobie Part# 8030291

SCREW 5/16-18 X 2" PHMS-P SS

Screw 8-32 X 3/8" THMS Roller
Furler Drum

Murrays Part# 50-8030501

Hobie® factory replacement 8-32 x 3/8" screw for roller furler drum.

Hobie Part# 8030501

SCREW 8-32X3/8" THMS

Screw ES Soc Cap 5/16-18 X 1"

Murrays Part# 50-8031781

5/16"-18 x 1" soc head screw as used on Hobie® kayaks

Hobie Part# 8031781

SCREW E/S SOC 5/16-18 X 1"

Previous 1 … 47 48 49 50 51 … 57 Next

Recently viewed

In Stock