In Stock

In Stock

2397 products

    Everything Murrays Marine carries, all in one place.  Catamaran parts, Kiteboarding and wing foiling central. Use the filters on the side or the search up top to refine your search.

    2397 products
    Quick Release Deluxe Pin 1/4 X 1.5 with Lanyard Murrays Part# 18-4M150L This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. This pin includes a lanyard to help prevent loss of pin. Uses: Hobie 18 mast hinge pin, Compare to Hobie part#P 20307 PIN, QR 1/4 X 1-1/2 CUP Upgrade for Hobie 8020181, 8020180, 8020431, 8020430, 8020420, 8020421
    QUICK RELEASE DELUXE PIN 1/4 X 1-1/2" WITH LANYARD
    Misc
    Quick-Release Pin Deluxe 1/4 X 3/4 Murrays Part# 18-4M075 This economical pin features a spring-loaded ball that exerts sufficient pressure to help avoid accidental release. The pin is also available with a lanyard to help prevent loss of pin (see related items below). Measurements are 1/4" diameter x 3/4" maximum grip length (distance from the shoulder to the locking ball bearings). Compare to Hobie Cat® #20302.
    QUICK RELEASE DELUXE PIN 1/4 X 3/4"
    Misc
    Quick-Release Pin Detent 1/4 X 1-1/2 Murrays Part# 18-4D150 The Quick-Release Pin Detent 1/4 X 1-1/2 is an economical, quick connection for Hobie 16 mast step pin. A spring-loaded ball exerts sufficient pressure to help avoid accidental release. Measurements are 1/4″ diameter x 1-1/2″ maximum grip length (distance from the shoulder to the locking ball bearings).
    QUICK RELEASE DETENT PIN 1/4 X 1-1/2"
    Misc
    Quick Release Detent Pin 1/4 X 3" Murrays Part# 18-4D300 Economical quick release pin has a spring-loaded ball that exerts sufficient pressure to help avoid accidental release. Measurements are 1/4" diameter x 3" maximum grip length (distance from the shoulder to the locking ball bearings). Uses: - Use as mast step pin on Hobie® 21 and Prindle 16/18/18-2/19 cats. Compare to Hobie part # 8020501
    Quick Release Detent Pin 1/4 X 3" Murrays Part# 18-4D300 Economical quick release pin has a spring-loaded ball that exerts sufficient pressure to help avoid accidental release. Measurements are 1/4" diameter x 3" maximum grip length (distance from the shoulder to the locking ball bearings). Uses: - Use as mast step pin on Hobie® 21 and Prindle 16/18/18-2/19 cats. Compare to Hobie part # 8020501
    QUICK RELEASE DETENT PIN 1/4 X 3"
    Misc
    Quick-Release Pin Deluxe 1/4 X 3/4 with Lanyard Murrays Part# 18-4M075L This aircraft quality quick-release pin features a deluxe dished head. No other locking pin is faster operating or safer. Stainless 1/16" x 7" lanyard stainless lanyard is secured on one end with a nicropress oval; the other end is left open so that you can secure with included nicropress oval after attaching the lanyard to your chosen location. Measurements are 1/4" diameter x 3/4" maximum grip length (distance from the shoulder to
    QUICK RELEASE PIN 1/4 X 3/4" WITH LANYARD
    Misc
    The Quick-Release Pin Deluxe 3/16 X 1″ with Lanyard features a deluxe dished head and a lanyard to help prevent loss. No other locking pin is faster operating or safer. The pin with cup head includes a stainless lanyard that comes secured on one end with a nicropress oval; the other end is left open so that you can secure with included nicropress oval after attaching the lanyard to your chosen location. This Quick Release Pin features 2 locking balls for a extra secure grip, push button deluxe dished head,
    QUICK RELEASE PIN 3/16 X 1 WITH LANYARD
    Misc
    Quick-Release Pin Deluxe 3/16 X 3/4 with Lanyard Murrays PN 18-3M075L The Quick-Release Pin Deluxe 3/16 X 3/4 with Lanyard features a deluxe dished head and a lanyard to help prevent loss. No other locking pin is faster operating or safer. The pin with cup head includes a stainless lanyard that comes secured on one end with a nicropress oval; the other end is left open so that you can secure with included nicropress oval after attaching the lanyard to your chosen location. This Quick Release Pin featur
    QUICK RELEASE PIN 3/16 X 3/4" WITH LANYARD
    Misc
    Quick Release Pin Deluxe 3/16 X 1" Murrays Part# 18-3M100 This convenient pin features a deluxe dished head with a hole for lanyard attachment. No other locking pin is faster operating or safer. The pin is also available with a 1/16" x 7" stainless lanyard with nicropress ovals (see related items). Measurements for this quick pin with cup head are 3/16" diameter x 1" maximum grip length (distance from the shoulder to the locking ball bearings).
    QUICK RELEASE PIN DELUXE 3/16 X 1"
    Misc
    Quick Release Pin Deluxe  3/16 X 3/4" Murrays Part# 18-3M075 This Quick Release Pin features 2 locking balls for a extra secure grip, and a push button deluxe dished head with a hole for lanyard attachment. The Deluxe pin is quick and easy to remove and install, and makes getting on and off the water quicker and easier.
    QUICK RELEASE PIN DELUXE 3/16 X 3/4"
    Misc
    Quick Release Pin Detent 1/4 X 1" Murrays Part# 18-4D100 This quick pin has a spring-loaded ball that exerts sufficient pressure to help avoid accidental release. Measures 1/4" diameter x 1" long. Can be used to replace 1/4" clevis pins up to 1" long.  Not recommended for use in shroud adjusters or chain plates.
    QUICK RELEASE PIN DETENT 1/4 X 1"
    Misc
    Radio Shoulder Harness Murrays Part# 011-0101 The Radio Shoulder Harness conveniently and securely holds a variety of VHF radio sizes. If your radio is not waterproof, add an Aquapac waterproof case for use in and around water. This harness is ideal for rescue services personnel! Ideal for marine environments, PWC, and sailors.
    RADIO SHOULDER HARNESS
    Murrays Sports
    Murrays Part# 46-0016 These are also referred to as "Rocket Style" adjusters. These will work with our H20 Race batten set and various other RBS or similar batten styles. Designed to be attached to the sail with a loop or a piece of line.; Fits RBS foam battens and allows the tension to be adjusted with a flat head screw driver. Both the line and webbing styles are shown in the above picture; The loop style are laying on top of the webbing style.
    RBS LOOP STYLE BATTEN TENSIONER 15x7.6MM
    RBS
    RBS Loop Style Batten Tensioner 10x5mm Murrays Part# 46-0011 These are also referred to as "Rocket Style" adjusters. These will work with our H20 Race batten set and various other RBS or similar batten styles. Designed to be attached to the sail with a loop or a piece of line. Fits RBS foam battens and allows the tension to be adjusted with a flat head screw driver. Both the line and webbing styles are shown in the above picture. The loop style are laying on top of the webbing style.
    RBS LOOP STYLE BATTEN TENSIONER 10x5mm
    RBS
    RBS Batten Tensioner 15x7.6mm Webbing Style Murrays Part# 46-0015 These are also referred to as "Rocket Style" adjusters. These will work with our H20 Race batten set and various other RBS or similar batten styles. Designed to be attached to the sail with a piece of webbing. Fits RBS foam battens and allows the tension to be adjusted with a flat head screw driver. Both the line and webbing styles are shown in the above picture. The loop style are laying on top of the webbing style.
    RBS WEBBING STYLE BATTEN TENSIONER 15x7.6MM
    RBS
    Re-Dek Traction System Murrays Part# 40-2010 Re-Dek is a quick and easy way to obtain permanent, professional-quality traction. The kit provides an easy step application process that allows you to customize the areas where permanent, no-slip traction is needed. Re-Dek can be applied right over graphics and artwork without hiding or distorting them.
    RE-DEK TRACTION SYSTEM
    Misc
    Rear Inboard Support Casting Kit Murrays Part# 50-61040001 Hobie® factory rear inboard support casting kit. Requires one per side. Hobie Part# 61040001
    REAR INBOARD SUPPORT CASTING KIT
    Hobie
    Rear Mast Support with "V" Murrays Part# 13-3002
    REAR MAST SUPPORT WITH "V"
    Murrays Sports
    REMOVABLE STUD (8x40mm)
    Misc
    REMOVABLE STUD (8X50mm)
    Misc
    REPL URETHANE TENDON 1994 & UP
    Misc
    Replaceable Aluminum Trap Handle Murrays Part# 007-2010 Foam-covered aluminum handle is easily installed onto existing trapeze wire. Carry a spare as a temporary repair, then replace the wire at your convenience. Each. Hobie Cat® Part# 2010
    REPLACABLE ALUMINUM TRAP HANDLE
    Murrays Sports
    Revivex Breathable Fabric Guard Murrays Part# 40-6536 Spray-on water repellent for outerwear of all types of fabrics, including GORE-TEX®, Windstopper®, and all types of breathable laminates and synthetic fabrics. For all-season comfort, just machine wash, spray ReviveX®, then tumble dry (dryer-safe fabrics only!). Long-lasting ReviveX® is water-based, non-toxic and non-flammable. The 10 fl. oz. trigger spray bottle treats 2-4 garments.
    REVIVEX BREATHABLE FABRIC GUARD
    Misc
    The Ride engine 3.2L Macro Pump is the biggest kite pump on the market today! 3.2 liters of air per stroke as compared to 2.9L tall kite pumps.
    RIDE ENGINE 3.2L MACRO PUMP
    Ride Engine
    Ride Engine Adjustable Wing Harness Line Murrays Part# 54-5530 Those pigtails or webbing loops on your wing are there for a purpose! The Ride Engine Adjustable Wing Harness Line is easy to apply and transfer from wing to wing with the carabiner connection and features an easy pull-strap adjustment for reach and varied pigtail or webbing spread dimensions. Features Webbing pull tab adjustment Quick connect and disconnect carabiner interface PU-coated harness line
    RIDE ENGINE ADJUSTABLE WING HANESS LINE
    Ride Engine
    Sale
    The Ridengine Defender Vest has been designed to give you gladiator-level protection from a potentially injurious board or foil strike to the torso. Riding a hydrofoil on any type of surf craft in any condition can go sideways quickly, making an impact vest mandatory equipment for most foilers. The padding on the Defender HF Impact Vest is logically located to allow for unobtrusive paddling and smooth integration under a kite or windsurf harness.
    RIDE ENGINE DEFENDER VEST
    Ride Engine
    Save $38.99
    Ride Engine Downwind Dry Waist Bag Murrays Part# 54-5536 Cellphone, key fob, credit card, or anything that you want to keep dry and safe on your person the Ride Engine waterproof pouch is the perfect solution for sessions to downwind runs on a SUP, Kite or wingsurf.
    RIDE ENGINE DOWNWIND DRY WAIST BAG
    Ride Engine
    Less can be more. Don't believe us? Then check out our Minimalist Foot Strap, built with thermoformed EVA, it's the perfect strap if you want to stay connected but also want to get free quickly. The Minimalist Foot Strap's webbing reinforcement lays virtually flat when paddling and pops up when not under pressure, making it a primo choice for sinker wing boards, tow boards, and freeride kite-foil boards.
    RIDE ENGINE MINIMALIST EVA FOOT STRAP
    Ride Engine
    Ridengine Nug Murrays part# 54-5521 The Ridengine Nug is a universal wing harness sliding hook that can be mounted on virtually all wing harnesses available today. Simple, easy to use wingsurf harness line hook that is adaptable to any webbing waist leash or webbing slider harness.
    RIDE ENGINE NUG
    Ride Engine
    The Ride Engine RE Simple Wing Harness Line is strong, durable, and simple. This water wing harness line can be used wings that have webbing or pigtails attachment points. It also features three knot hitch adjustment for tuning the harness line length.  Features: Strong Dyneema rope Knotted adjustment
    RIDE ENGINE SIMPLE WING HARNESS LINE
    Ride Engine
    Sale
    The Ridengine Sky Hook impact vest is designed to protect you from any and all collisions. At the same time, it connects you to the power of your wing with The Nug harness line hook and to your board with an optional leash attachment point. Full torso padding protects from impact and the added flotation can help boost confidence in the water.
    RIDE ENGINE SKY HOOK IMPACT VEST
    Ride Engine
    Save $60
    The Ridengine Wing Harness line is compatible with all wings and the length can be adjusted by moving the knots in the internal line located on the backside of the loops. This harness line works on all wing handle configurations. The webbing loops on the wing harness line are great for booms and handles because they hold the harness line in place and disperse the load so that they do not damage the grip on your handles.
    RIDE ENGINE WING HARNESS LINE
    Ride Engine
    The Ridengine Wing Board Travel Coffin is designed for modern wing boards, this coffin travel bag will get your prized deck to the destination in one piece and ding free. The Wing Board Travel Coffin’s wide-body wheeled chassis cruises through airports, dirt roads, and stairs with the toughness of a semi-truck. A robust 360-degree padding keeps all the goods protected, a full-length, heavy-duty zipper opens wide for easy packing/stuffing, and a large internal pocket fits your wings for extra TLC.
    RIDE ENGINE WING TRAVEL COFFIN BOARD BAG
    Ride Engine
    Rig Tension Gauge Deluxe Murrays Part# 33-1795 The Deluxe Rig Tension Gauge is designed to provide an accurate measurement of the tension in standing rigging wire with accurate and repeatable tuning. This product is built by Loose, and is also known as a Loose Gauge. The Loose gauge has been a standard for performance tuning for decades. The Standard model #33-1795 gauges 3/32", 1/8" and 5/32" cable tension adjustment. The Metric model #33-1795M is for cable sizes 2.5mm, 3mm and 4mm
    RIG TENSION GAUGE DELUXE-STANDARD
    Misc
    RIGGING CUSTOM FORESTAY
    Murrays Sports
    Rigging Tape 1"X 15' White Murrays Part# 010-3460 Protects against chafing and sharp edges while providing safety for sails, lines and rope ends. This self-bonding tape is waterproof and leaves no sticky residue. 1" x 15 feet.
    RIGGING TAPE 1"X 15' WHITE
    Misc
    Righting Bag Only (200+LBS) Murrays Part# 001-3282 This is the bag only from Murrays' popular Cat Righting Big Bag System (#01-3280). The 18" x 32" bag attaches with hook and loop straps under the tramp for easy use and storage. The theoretical maximum capacity of the bag is 250 lbs.
    RIGHTING BAG ONLY (200+LBS)
    Murrays Sports
    Ring 3/8 X 2" (Nylon) Murrays Part# 27-190570 3/8" nylon ring has an inside diameter of 2 inches.
    RING 3/8 X 2" (NYLON)
    Misc
    RING SS WELDED 3/16"x 1" ID
    Murrays Sports
    Ring: 1/4 X 2 Diameter (Stainless Steel) Murrays Part# 25-3050 1/4" x 2" stainless ring can be used for Prindle-style jib halyards.
    RING: 1/4 X 2" DIAMETER (SS)
    Murrays Sports
    Rivet 3/16 x 5/16 Aluminum Murrays Part# 50-8010071 Hobie® factory aluminum 3/16" x 5/16" rivet. A rivet tool is required for installation.
    RIVET 3/16X 5/16 ALUMINUM
    Hobie
    Recently viewed