In Stock

In Stock

2397 products

    Everything Murrays Marine carries, all in one place.  Catamaran parts, Kiteboarding and wing foiling central. Use the filters on the side or the search up top to refine your search.

    2397 products
    Mast Head Casting Murrays Part# 56-6502 Factory replacement mast head casting for Prindle 15 Catamaran
    PRINDLE MAST HEAD CASTING
    NACRA
    Mast Step Hinge Murrays Part# 56-6815 Designed and built to meet or exceed original OEM.  ​Mast step hinge for all Prindles. Use two #56-F128 mast step hinge pins. Nacra Sailing factory item# 30455
    PRINDLE MAST STEP HINGE
    Murrays Sports
    PRINDLE MAST STEP HINGE PIN
    Murrays Sports
    Prindle New Rubber Hull Plug Murrays Part# 56-1015 ​Solid rubber hull plug for Prindle's fits into 1-5/8″ diameter hole. This part is not as clean of a fit as the original part. Some silicone may help with placement. Nacra Sailing factory item #30378
    PRINDLE NEW RUBBER HULL PLUG
    NACRA
    Nylon Washer Internal Casting Prindle Murrays Part# 56-F118 Nylon washer is used on Prindle rudder casting to separate the upper sheaves to help keep the line from fouling. Order four per side to remove as much slop as possible. Performance Sports factory item #F118
    PRINDLE NYLON WASHER INTERNAL CASTING
    NACRA
    Prindle split rings and clevis pin kit, mast hinge pin
    PRINDLE PINS & RINGS KIT
    Murrays Sports
    Rear Hex Bolt 5/16 X 5.75" Outboard Bolt Murrays Part# 56-F141 5/16" x 5-3/4" hex cap bolt is for Prindle rear crossbar. Performance Sports Factory item# F141
    PRINDLE REAR HEX BOLT 5/16 X 5.75" OUTBOARD BOLT
    NACRA
    Right Rear Crossbar End Cap Murrays Part# 56-3902 Prindle Right Rear Crossbar End Cap P19, 18-2 is a right rear crossbar end cap for Prindle 19 and 18-2. Performance Sports factory item# 3902
    PRINDLE RIGHT REAR CROSSBAR END CAP
    NACRA
    Right Rudder Casting Murrays Part# 56-4005 ​Right rudder casting for all Prindles does not include hardware. Nacra Sailing factory item# 30413
    PRINDLE RIGHT RUDDER CASTING
    Murrays Sports
    Rudder Lock Release Strap Murrays Part# 56-4010 This is one of two plates used in each rudder assembly on a Prindle beach cat. This is part of the internal assembly that moves up and down as part of the rudder pull up/down system. The Prindle Rudder Lock Release Strap is works on all Prindles. Nacra sailing factory item# 30415 Prindle Part# 4010
    PRINDLE RUDDER LOCK RELEASE STRAP
    NACRA
    Rudder Locking Bolt Murrays Part# 56-4017 The Prindle Rudder Locking Bolt is the factory replacement bolt for rudder locking system on all Prindles. Tip: Be sure to check for proper alignment of the lock bolt to spring bolt. Any bent component will prevent the system from working properly. Identify and replace the bent portion to get your rudder system functioning properly. Performance Sports factory item# 4017
    PRINDLE RUDDER LOCKING BOLT
    NACRA
    Rudder Pull Up/Down Kit Prindle Murrays Part# 001-1180 Replacement handles and ropes to pull your rudders up and down on all Prindle models.
    PRINDLE RUDDER PULL UP/ DOWN KIT
    Murrays Sports
    PRINDLE RUDDER REFRESH KIT
    Murrays Sports
    Nylon Spacer Murrays Part# 56-4011 Prindle rudder spacer, Prindle part number 4011.
    ILLUSTRATED PRNDLE RUDDER PARTS LIST
    PRINDLE RUDDER SPACER
    Murrays Sports
    Prindle Shroud Anchor Bar Murrays Part# 56-1014 Shroud anchor bar for Prindle 15, 16 or 18 Performance Sports factory item# 1014
    PRINDLE SHROUD ANCHOR BAR
    NACRA
    Prindle Rudder Arm Slotted P15/16/18 Murrays Part# 56-5004 22.5" Anodized slotted rudder arm fits all Prindle 15, 16 and 18 Nacra Sailing factory item #30430
    PRINDLE SLOTTED RUDDER ARM
    NACRA
    Small Dolphin Striker Casting Murrays Part# 56-2009C Small dolphin striker casting for Prindle catamarans Performance Sports item# 2009C
    Prindle part numbers 2505, 2009 and 2009C
    PRINDLE SMALL DOLPHIN STRIKER CASTING
    NACRA
    Prindle Spare Parts Kit Murrays Part# 001-5221 Why lose a weekend of sailing due to a missing part? Stored in a 5" x 12" zippered pouch, the Murrays Spare Parts Kit contains the most frequently lost and needed items. Includes shackle tool, two drain plugs with gaskets, aluminum rudder pins, clevis pins and rings kit, 3/16" bow shackle, 1/4" bow shackle and batten tie line. Pouch comes in assorted colors as available.
    PRINDLE SPARE PARTS KIT
    Murrays Sports
    Tiller Rudder Stiffening Kit: Prindle Murrays Part# 001-5141 Spring-loaded tiller connection with contoured spacers tightens the hinge connection on Prindles. Six plastic shims reduce slop between rudders and castings
    PRINDLE TILLER AND RUDDER STIFFENING KIT
    Murrays Sports
    The Tramp Line Kit: When lacing your trampoline, line offers a longer-lasting option over shock cord and is the better choice for sailors who prefer a very tight tramp. As the line stretches slightly over time, sailors can re-tension the tramp lacing to their liking. The line in this kit is black, abrasion-resistant, 8-strand low stretch. #001-2246 for Prindle 15, 16, 18 or Escape includes two 1/8" x 11' lengths and one 3/16" x 22'. #001-2248 for Prindle 18.2 or 19 includes two 19-foot lengths of
    PRINDLE TRAMP LINE KIT
    Murrays Sports
    Traveler Car Murrays Part# 56-3010 The Prindle Traveler Car is standard equipment on all models of the latest Prindle® cats. Four durable plastic rollers ride smoothly on Prindle® traveler tracks. Two cylindrical sheaves reduce traveler control line friction. Performance Sports factory item# 3010
    PRINDLE TRAVELER CAR
    NACRA
    Bolt Plate Murrays Part# 56-2008 Bolt plate for dolphin striker fits Prindle 15, 16, 18, Escape, 18-2, 19, 19MX. Nacra Sailing factory item #30043
    PRINDLE/ESCAPE BOLT PLATE
    NACRA
    Bow Tang Murrays Part# 56-1810 Bow tang for Prindle 15, 16, 18 and Escape Nacra Sailing factory item# 30386
    PRINDLE/ESCAPE BOW TANG
    NACRA
    Hex Bolt5/16 X 4.25" Murrays Part# 56-F104 Hexcap bolt measures 5/16 x 4-1/4" and is used on the front crossbar (outboard) of Prindle 15/16/Escape and older Nacras. Performance Sports factory item #F104.
    PRINDLE/ESCAPE/NACRA HEX BOLT 5/16 X 4.25"
    NACRA
    GOOSENECK 'U' BRACKET Murrays Part# 56-7810 Prindle Gooseneck 'U' Bracket Gooseneck "U" bracket fits Nacra 5.2 and all Prindles. Nacra Sailing factory item# 30980
    PRINDLE/NACRA GOOSENECK 'U' BRACKET
    NACRA
    Gooseneck Bolt Murrays Part# 56-F131 3/8" x 1-1/2" gooseneck bolt for Nacra 5.2 and all Prindles. Performance Sports factory item # F131
    PRINDLE/NACRA GOOSENECK BOLT
    NACRA
    Jib Track End Stop Murrays Part# 56-1911 1 Jib track end stop. Fits Nacra 5.5SL, 5.7, 5.8, 6.0, as well as Prindle 18-2 and 19.
    PRINDLE/NACRA JIB TRACK END STOP
    NACRA
    Main Halyard Hook Murrays Part# 56-6812 Main halyard lock (hook) or all Prindles and older Nacras. Nacra Sailing factory item# 30192
    PRINDLE/NACRA MAIN HALYARD HOOK
    NACRA
    Narrow Gudgeon Murrays Part# 56-1011 Narrow gudgeon fits Nacra 5.0, 5.7, 6.0 and Prindle 18-2 and 19 Nacra Sailing factory item# 300007
    PRINDLE/NACRA NARROW GUDGEON
    NACRA
    Prindle Rudder Lock Bolt Nut Murrays Part# 56-4018 The Prindle Rudder Lock Bolt Nut is the factory replacement 3/8″ hex nut for rudder lock bolts on all Prindles. Also used as the jam nut for adjuster screw on Nacra bridle foil assembly. Nacra Sailing factory item #30420. Prindle part number 4018
    Prindle rudder parts 4000, 4001, 4002, 4004, 4005, 006, 4007, 4009, 4012, 4010, 4014, 013, 4016, F115, F120
    PRINDLE/NACRA RUDDER LOCK BOLT NUT
    NACRA
    Screw PHMS 1/4-20 X 1" Stainless Steel Murrays Part# 19-3020 Stainless steel, slotted pan head 1/4-20 x 1" machine screw to fasten mast bearing on pre-1990 Hobie® 18. Other uses include universal Prindle/Nacra bow plate and bow tang on Prindle 15/16/18/Escape. Replaces Murrays item #56-F125.
    PRINDLE/NACRA SCREW PHMS 1/4-20 X 1" (SS)
    Misc
    Boom Outhaul Car Murrays Part# 56-7907 Internal boom outhaul car for all Prindles, Nacra 5.2 and Inters. Nacra Sailing factory item# 30206
    PRINDLE/NACRA/INTER BOOM OUTHAUL CAR
    NACRA
    Dolphin Mast Support Pad Murrays Part# 56-2505 Dolphin striker mast support pad fits all Prindle's, Nacra's and Inters. This dolphin striker mast support is also known as a dolphin striker casting. It sits between the dolphin post rod and the dolphin striker rod. Nacra Sailing factory item# 30063.
    PRINDLE/NACRA/INTER DOLPHIN MAST SUPPORT PAD
    NACRA
    PROP GUARD 503/1003 MOLDED END CAP
    Torqeedo
    Prop Guard Torqeedo Travel Motor The Murrays Torqeedo Prop Guard is designed for use on the Torqeedo 503, 1003, 1103, 1103AC and 603 electric motors. Our Prop Guard protects the propeller from rocks, debris, and fishing line. These are made to fit specific models of Motors, so please select your motor carefully from the drop down options above. The Travel motors were updated in 2021 to the 603 and 1103 versions.
    PROP GUARD TORQEEDO TRAVEL MOTOR
    Murrays Sports
    PROPELLER GUARD FOR TORQEEDO CRUISE MOTORS
    Murrays Sports
    PVC Centerboard Pivot Tube Murrays Part# 56-1029 PVC centerboard pivot tube is Performance Sports factory item #1029
    PVC CENTERBOARD PIVOT TUBE
    NACRA
    PWC Footstrap Kit Murrays Part# 001-2020 The PWC Footstrap Kit includes a pair of footstraps, twist control system and fasteners. A pre-formed arch prevents collapsing, so your foot slides right in and is cradled by the comfortable 7mm neoprene padding. Sold in pairs
    PWC FOOTSTRAP KIT (PR)
    Murrays Sports
    Q-Power Line Pro - kiteboarding, spearfishing line, Hobie kayak steering line
    Q-POWER LINE PRO
    Misc
    Replace a 3/16" bow shackle with this quick-release version to add convenience. Can be used on 2-1/4" blocks. Compare to Hobie Cat® #3062.
    QUICK RELEASE 3/16" BOW SHACKLE
    Murrays Sports
    Recently viewed