In Stock

In Stock

2269 products

    Everything Murrays Marine carries, all in one place.  Catamaran parts, Kiteboarding and wing foiling central. Use the filters on the side or the search up top to refine your search.

    2269 products
    Quick Release Pin Detent 1/4 X 1" Murrays Part# 18-4D100 This quick pin has a spring-loaded ball that exerts sufficient pressure to help avoid accidental release. Measures 1/4" diameter x 1" long. Can be used to replace 1/4" clevis pins up to 1" long.  Not recommended for use in shroud adjusters or chain plates.
    QUICK RELEASE PIN DETENT 1/4 X 1"
    Misc
    Radio Shoulder Harness Murrays Part# 011-0101 The Radio Shoulder Harness conveniently and securely holds a variety of VHF radio sizes. If your radio is not waterproof, add an Aquapac waterproof case for use in and around water. This harness is ideal for rescue services personnel! Ideal for marine environments, PWC, and sailors.
    RADIO SHOULDER HARNESS
    Murrays Sports
    Murrays Part# 46-0016 These are also referred to as "Rocket Style" adjusters. These will work with our H20 Race batten set and various other RBS or similar batten styles. Designed to be attached to the sail with a loop or a piece of line.; Fits RBS foam battens and allows the tension to be adjusted with a flat head screw driver. Both the line and webbing styles are shown in the above picture; The loop style are laying on top of the webbing style.
    RBS LOOP STYLE BATTEN TENSIONER 15x7.6MM
    RBS
    RBS Loop Style Batten Tensioner 10x5mm Murrays Part# 46-0011 These are also referred to as "Rocket Style" adjusters. These will work with our H20 Race batten set and various other RBS or similar batten styles. Designed to be attached to the sail with a loop or a piece of line. Fits RBS foam battens and allows the tension to be adjusted with a flat head screw driver. Both the line and webbing styles are shown in the above picture. The loop style are laying on top of the webbing style.
    RBS LOOP STYLE BATTEN TENSIONER 10x5mm
    RBS
    RBS Tensioner Key Tool Murrays Part# 46-0001 RBS Tensioner Key Tool is a convenient tool for adjusting RBS batten tensioners.
    RBS TENSIONER KEY TOOL
    RBS
    RBS Batten Tensioner 15x7.6mm Webbing Style Murrays Part# 46-0015 These are also referred to as "Rocket Style" adjusters. These will work with our H20 Race batten set and various other RBS or similar batten styles. Designed to be attached to the sail with a piece of webbing. Fits RBS foam battens and allows the tension to be adjusted with a flat head screw driver. Both the line and webbing styles are shown in the above picture. The loop style are laying on top of the webbing style.
    RBS WEBBING STYLE BATTEN TENSIONER 15x7.6MM
    RBS
    Re-Dek Traction System Murrays Part# 40-2010 Re-Dek is a quick and easy way to obtain permanent, professional-quality traction. The kit provides an easy step application process that allows you to customize the areas where permanent, no-slip traction is needed. Re-Dek can be applied right over graphics and artwork without hiding or distorting them.
    RE-DEK TRACTION SYSTEM
    Misc
    Rear Mast Support with "V" Murrays Part# 13-3002
    REAR MAST SUPPORT WITH "V"
    Murrays Sports
    REMOVABLE STUD (8x40mm)
    Misc
    REMOVABLE STUD (8X50mm)
    Misc
    Replaceable Aluminum Trap Handle Murrays Part# 007-2010 Foam-covered aluminum handle is easily installed onto existing trapeze wire. Carry a spare as a temporary repair, then replace the wire at your convenience. Each. Hobie Cat® Part# 2010
    REPLACABLE ALUMINUM TRAP HANDLE
    Murrays Sports
    Rescue Step - Boat
    Hobie
    Revivex Breathable Fabric Guard Murrays Part# 40-6536 Spray-on water repellent for outerwear of all types of fabrics, including GORE-TEX®, Windstopper®, and all types of breathable laminates and synthetic fabrics. For all-season comfort, just machine wash, spray ReviveX®, then tumble dry (dryer-safe fabrics only!). Long-lasting ReviveX® is water-based, non-toxic and non-flammable. The 10 fl. oz. trigger spray bottle treats 2-4 garments.
    REVIVEX BREATHABLE FABRIC GUARD
    Misc
    RHMS #10-32 X 1.5 (SS) SLOT
    MISC
    The Ride engine 3.2L Macro Pump is the biggest kite pump on the market today! 3.2 liters of air per stroke as compared to 2.9L tall kite pumps.
    RIDE ENGINE 3.2L MACRO PUMP
    Ride Engine
    Ride Engine Adjustable Wing Harness Line Murrays Part# 54-5530 Those pigtails or webbing loops on your wing are there for a purpose! The Ride Engine Adjustable Wing Harness Line is easy to apply and transfer from wing to wing with the carabiner connection and features an easy pull-strap adjustment for reach and varied pigtail or webbing spread dimensions. Features Webbing pull tab adjustment Quick connect and disconnect carabiner interface PU-coated harness line
    RIDE ENGINE ADJUSTABLE WING HANESS LINE
    Ride Engine
    Ride Engine Downwind Dry Waist Bag Murrays Part# 54-5536 Cellphone, key fob, credit card, or anything that you want to keep dry and safe on your person the Ride Engine waterproof pouch is the perfect solution for sessions to downwind runs on a SUP, Kite or wingsurf.
    RIDE ENGINE DOWNWIND DRY WAIST BAG
    Ride Engine
    Less can be more. Don't believe us? Then check out our Minimalist Foot Strap, built with thermoformed EVA, it's the perfect strap if you want to stay connected but also want to get free quickly. The Minimalist Foot Strap's webbing reinforcement lays virtually flat when paddling and pops up when not under pressure, making it a primo choice for sinker wing boards, tow boards, and freeride kite-foil boards.
    RIDE ENGINE MINIMALIST EVA FOOT STRAP
    Ride Engine
    Ridengine Nug Murrays part# 54-5521 The Ridengine Nug is a universal wing harness sliding hook that can be mounted on virtually all wing harnesses available today. Simple, easy to use wingsurf harness line hook that is adaptable to any webbing waist leash or webbing slider harness.
    RIDE ENGINE NUG
    Ride Engine
    The Ride Engine RE Simple Wing Harness Line is strong, durable, and simple. This water wing harness line can be used wings that have webbing or pigtails attachment points. It also features three knot hitch adjustment for tuning the harness line length.  Features: Strong Dyneema rope Knotted adjustment
    RIDE ENGINE SIMPLE WING HARNESS LINE
    Ride Engine
    The Ridengine Wing Board Travel Coffin is designed for modern wing boards, this coffin travel bag will get your prized deck to the destination in one piece and ding free. The Wing Board Travel Coffin’s wide-body wheeled chassis cruises through airports, dirt roads, and stairs with the toughness of a semi-truck. A robust 360-degree padding keeps all the goods protected, a full-length, heavy-duty zipper opens wide for easy packing/stuffing, and a large internal pocket fits your wings for extra TLC.
    RIDE ENGINE WING TRAVEL COFFIN BOARD BAG - 4'8"
    Ride Engine
    Replacement shroud for a 5.7 G-Cat.
    Hobie 16 Shroud Extra Heavy Duty 5/32" Murrays Part# 002-0205-12 The Murrays Heavy Duty 5/32" Hobie 16 shroud (sidestay) wire is an extra heavy duty shroud for the Hobie 16.  It is 5/32 wire compared to the standard 1/8" wire and we use a roller swaged marine eye fitting on the lower connection point. Our hydraulic swager exerts a force of over 10,000 pounds to quickly swage without work-hardening the stainless fittings. 20790011
    RIGGING CUSTOM SHROUD
    Murrays Sports
    Rigging Tape 1"X 15' White Murrays Part# 010-3460 Protects against chafing and sharp edges while providing safety for sails, lines and rope ends. This self-bonding tape is waterproof and leaves no sticky residue. 1" x 15 feet.
    RIGGING TAPE 1"X 15' WHITE
    Misc
    Righting Bag Only (200+LBS) Murrays Part# 001-3282 This is the bag only from Murrays' popular Cat Righting Big Bag System (#01-3280). The 18" x 32" bag attaches with hook and loop straps under the tramp for easy use and storage. The theoretical maximum capacity of the bag is 250 lbs.
    RIGHTING BAG ONLY (200+LBS)
    Murrays Sports
    Ring 3/8 X 2" (Nylon) Murrays Part# 27-190570 3/8" nylon ring has an inside diameter of 2 inches.
    RING 3/8 X 2" (NYLON)
    Misc
    RING SS WELDED 3/16"x 1" ID
    Murrays Sports
    Ring: 1/4 X 2 Diameter (Stainless Steel) Murrays Part# 25-3050 1/4" x 2" stainless ring can be used for Prindle-style jib halyards.
    RING: 1/4 X 2" DIAMETER (SS)
    Murrays Sports
    Rivet 3/16 x 5/16 Aluminum Murrays Part# 50-8010071 Hobie® factory aluminum 3/16" x 5/16" rivet. A rivet tool is required for installation.
    RIVET 3/16X 5/16 ALUMINUM
    Hobie
    Rivet 6-18 Aluminum RIVET POP 3/16 x 1 1/8th inch aluminum rivet to hold the traveler control sheave on a H16 front crossbar from late 90s to current. Hobie Part Number 8011251
    RIVET 6-18 ALUMINUM
    Hobie
    Rivet AAC 3/16 x 5/8 CSK Murrays Part# 50-8010171 Hobie® factory aluminum 3/16" x 5/8" countersunk rivet requires a rivet tool for installation.
    RIVET AAC 6-10 3/16x5/8 CSK
    Hobie
    Rivet AAP 6-10 (3/16 X 5/8) Murrays Part# 19-5014 A rivet gun is required for installation of this 3/16" x 5/8" aluminum pop rivet
    RIVET AAP 6-10 (3/16 X 5/8)
    Misc
    Rivet AAP 6-4 (3/16 X 1/4) Murrays Part# 19-5011 A rivet gun is required for installation of this 3/16" x 1/4" aluminum pop rivet.
    RIVET AAP 6-4 (3/16 X 1/4)
    Misc
    Rivet AAP 6-6 (3/16 X 3/8) Murrays Part# 19-5012 A rivet gun is required for installation of this 3/16" x 3/8" aluminum pop rivet.
    RIVET AAP 6-6 (3/16 X 3/8)
    Misc
    RIVET CCC 6-4 (3/16 X.25 CSK) Murrays Part# 19-5021 This size stainless steel countersunk rivet. 002-1041 stop sleeve is helpful for track instillation as a spacer to fit into the track to help get the rivet flush.
    RIVET CCC 6-4 (3/16 X.25 CSK)
    Misc
    Rivet CCC 6-6 (3/16 X 3/8) Countersunk Murrays Part# 19-5024 Countersunk stainless steel 3/16" x 3/8" rivet for traveler tracks, etc. Compare to Hobie Part # 8010201. This rivets is what Hobie recommends for both the main traveler tack and the jib traveler track. We also recommend using an 1/8" stop sleeve, part number 002-1041, as a spacer to help you apply pressure on the rivet inside the track, as the track is too narrow for most rivet guns to get far enough inside to apply pressure to the rivet.
    RIVET CCC 6-6 CSK
    Misc
    Rivet CCC 6-8 CSK 18-8 Murrays Part# 19-5026
    RIVET CCC 6-8 CSK 18-8
    Misc
    Rivet CCP 4-6 (1/8 X 3/8) Murrays Part# 19-5030 Stainless steel 1/8" x 3/8" rounded pan head rivet.
    RIVET CCP 4-6 (1/8 X 3/8)
    Misc
    Rivet CCP 6-10 (3/16 X 5/8) Murrays Part# 19-5034 Stainless steel 3/16" x 5/8" rounded pan head rivet. Compare to Hobie Cat® #8010121. Halyard mast cleat rivet
    RIVET CCP 6-10 (3/16 X 5/8)
    Misc
    Rivet CCP 6-4 (3/16 X 1/4) Murrays Part# 19-5031 Stainless steel 3/16" x 1/4" rounded pan head rivet. Compare to Hobie Cat® #8010181. This is a common rivet used on many extrusions. Hobie, Nacra, Prindle masts and booms. Pair with a rivet casing to seal the rivet hole when used on masts. All Hobie mast hounds, tangs, heads, and cheek blocks. Used with Hobie Getaway Bow Spreader Plates Used on Hobie Getaway FWD and REAR Crossbar Stop Plates
    RIVET CCP 6-4 (3/16 X 1/4)
    Misc
    RIVET CCP 6-6 (3/16 X 3/8) Murrays Part# 19-5032 Stainless steel 3/16" x 3/8" pan head rivet Among other uses, the Stainless steel 3/16" x 3/8" pan head rivet can be used when Hobie® rivet #8010131 is specified: Hobie 14 (2) or 16 (4) mast head Hobie Wave/Getaway/14/16/17/18/18SX/ mast base (4) Hobie 14/16 rudder upper casting (2) Hobie 14/16 tiller end cap (2) Hobie 14/16 boom front end cap (3) Pair with stainless steal rivet casings to seal the holes when using on the mast.
    RIVET CCP 6-6 (3/16 X 3/8)
    Misc
    Recently viewed