In Stock

In Stock

2269 products

Everything Murrays Marine carries, all in one place. Catamaran parts, Kiteboarding and wing foiling central. Use the filters on the side or the search up top to refine your search.

2269 products

Sort

4" ALUMINUM BAR FOR BOW TANG

Bow tang support rod for Prindle catamarans. Aluminum bar for bow tang on Prindle 15, 16 and 18 is Nacra Sailing factory item #30387.

PRINDLE 4" ALUMINUM BAR FOR BOW TANG

Brindle Pole Tang P19MX
Murrays Part# 56-1043
The bridle pole tang is part of the Prindle 19MX Conversion Kit. Performance Sports factory item #1043 is limited to stock on hand.

PRINDLE BRIDLE POLE TANG

Prindle Centerboard Lock Bearing
P18.2 19
Murrays Part# 56-4870
Centerboard lock bearing for Prindle 18.2 & 19 is Nacra Sailing factory item #30429. Approximately 1" diameter x 5/16" high.

PRINDLE CENTERBOARD LOCK BEARING

Centerboard Lock Screw 10-32X1" FHMS
Murrays Part# 56-F144
#10-32 X 1" FMHS centerboard lock screw for Prindle 18.2 and 19

PRINDLE CENTERBOARD LOCK SCREW 10-32X1" FHMS

Centerboard Spring Kit

Prindle Factory centerboard spring kit for Prindle 18.2 and 19 includes 4 springs. Performance Sports factory item #1027.

PRINDLE CENTERBOARD SPRING KIT

Crossbar End Cap Right Rear

Murrays Part# 56-3002

The Prindle crossbar end cap for the right rear cross bar on the Prindle 15, 16, 18 and Escape.

Performance Sports factory item# 3002

PRINDLE CROSSBAR RIGHT REAR END CAP

Diamond Tang 3-Hole Bottom
Murrays Part# 56-6813
The Prindle Diamond Tang 3-Hole (Bottom) is a 3-hole lower tang for diamond wire is for Prindle 18, 18-2 and 19. Performance Sailing factory item #6813; Nacra Sailing #31444.

PRINDLE DIAMOND TANG 3-HOLE BOTTOM

PRINDLE DOLPHIN STRIKER ROD 11.25"*

The Performance Sports factory #C105 11.25" dolphin striker rod is for Prindle 18-2 or 19 standard length. Order #56-C106 if standard is too short. Limited to stock on hand.

PRINDLE DOLPHIN STRIKER ROD 11.25"

PRINDLE DOLPHIN STRIKER ROD 12.25"

Nacra Sailing factory dolphin striker rod for Prindle 18-2 and 19. This extra long rod measures 12-1/4" long, as needed for some replacements.

PRINDLE DOLPHIN STRIKER ROD 12.25"

PRINDLE DYNEEMA RACE TRAMP LINE KIT

PRINDLE END CAP (SLOTTED) TILLER ARM

PRINDLE ESCAPE SHROUD 5/32 BLACK

PRINDLE EXTENDED GUDGEON

Front Crossbar End Cap

Murrays Part# 56-2902

The Prindle Front Crossbar End Cap is for the front crossbar of all Prindles fits both right and left sides. Please specify silver or black and we will do our best to accommodate your selection
Nacra Sailing factory item# 30394

PRINDLE FRONT CROSSBAR END CAP

Half Round Load Spreader

Murrays Part# 56-4019

This component is installed into the head of the rudder blade to anchor the rudder locking pin. The Prindle Half Round Load Spreader is for rudder system on all Prindles.

Prindle Part# 4019

Nacra sailing factory item# 30973

PRINDLE HALF ROUND LOAD SPREADER

Hex Bolt 3/8 X 4.25"

Murrays Part# 56-F142

3/8" x 4-1/4" hex head bolt is for Prindle front crossbar

Performance Sports factory item# F142

PRINDLE HEX BOLT 3/8 X 4.25"

PRINDLE ILLUSTRATED PARTS LIST

Jib Halyard "S" Hook

Murrays Part# 56-9839

The Prindle Jib Halyard "S" Hook is a welded stainless "S" hook for Prindle-style jib halyards. Nacra Sailing factory item #30507.

Performance sailing part# 9839

Nacra Sailing factory item# 30507

PRINDLE JIB HALYARD "S" HOOK

PRINDLE JIB HALYARD WITH SISTER CLIPS

Left Rear Crossbar End Cap

Murrays Part# 56-3903

The Prindle Left Rear Crossbar End Cap is for the Prindle 19 and 18-2 cats

Performance Sports factory item# 3903

PRINDLE LEFT REAR CROSSBAR END CAP

Rudder Casting Only Left Prindle

Murrays Part# 56-4001

Left rudder casting for all Prindles does not include hardware. The remaining stock of clear anodized castings have not had their tiller arm hole machined and will likely not fit without additional machining.

Nacra Part# 30412

PRINDLE LEFT RUDDER CASTING

PRINDLE LOOP TOP SINGLE BLOCK

Prindle Rudder Lower Plastic Spacer

Murrays Part# 56-4014

Prindle Rudder Lower Plastic Spacer is used on the rudder systems of all Prindle models. Performance Sports factory item #4014. 9/16″ wide x 1/2″ diameter, 1/4″ hole.

ILLUSTRATED PRNDLE RUDDER PARTS LIST

PRINDLE LOWER RUDDER PLASTIC SPACER

Mast Base Hinge

Murrays Part# 56-6516

Mast base hinge plate for Prindle 15

Performance Sports Factory item# 6516

PRINDLE MAST BASE HINGE

Mast Base Hinge Plate

Murrays Part# 56-6816

Mast base hinge plate for Prindle 18, 18-2 and 19

Performance Sports factory item# 6816

PRINDLE MAST BASE HINGE PLATE

Mast Bearing Half Round

Murrays Part# 56-2007

Half-round mast bearing for all Prindle mast steps.

Nacra Sailing factory item# 30964

PRINDLE MAST BEARING HALF ROUND

Mast Head Casting

Murrays Part# 56-6002

Mast head casting for Prindle 16 and Escape

Nacra Sailing factory item# 30439

PRINDLE MAST HEAD CASTING

Mast Head Casting

Murrays Part# 56-6902

Mast head casting for Prindle 18-2 and 19.

Nacra Sailing factory item# 30459

PRINDLE MAST HEAD CASTING

Mast Head Casting

Murrays Part# 56-6502

Factory replacement mast head casting for Prindle 15 Catamaran

PRINDLE MAST HEAD CASTING

6815 Prindle mast hinge with pins. Used to raise the mast on the Prindle 15, 16, 18 18.2 and 19.

6815 Prindle mast hinge with pins. Used on the Prindle 15, 16, 18 18.2 and 19.

PRINDLE MAST HINGE KIT

Mast Step Hinge

Murrays Part# 56-6815

Designed and built to meet or exceed original OEM. 

Mast step hinge for all Prindles. Use two #56-F128 mast step hinge pins.

Nacra Sailing factory item# 30455

PRINDLE MAST STEP HINGE

PRINDLE MAST STEP HINGE PIN

Prindle New Rubber Hull Plug

Murrays Part# 56-1015

Solid rubber hull plug for Prindle's fits into 1-5/8″ diameter hole. This part is not as clean of a fit as the original part. Some silicone may help with placement.

Nacra Sailing factory item #30378

PRINDLE NEW RUBBER HULL PLUG

Nylon Washer Internal Casting Prindle
Murrays Part# 56-F118
Nylon washer is used on Prindle rudder casting to separate the upper sheaves to help keep the line from fouling. Order four per side to remove as much slop as possible.
Performance Sports factory item #F118

PRINDLE NYLON WASHER INTERNAL CASTING

Prindle split rings and clevis pin kit, mast hinge pin

PRINDLE PINS & RINGS KIT

Rear Hex Bolt 5/16 X 5.75" Outboard Bolt

Murrays Part# 56-F141

5/16" x 5-3/4" hex cap bolt is for Prindle rear crossbar.

Performance Sports Factory item# F141

PRINDLE REAR HEX BOLT 5/16 X 5.75" OUTBOARD BOLT

Right Rear Crossbar End Cap

Murrays Part# 56-3902

Prindle Right Rear Crossbar End Cap P19, 18-2 is a right rear crossbar end cap for Prindle 19 and 18-2.

Performance Sports factory item# 3902

PRINDLE RIGHT REAR CROSSBAR END CAP

Right Rudder Casting

Murrays Part# 56-4005

Right rudder casting for all Prindles does not include hardware.

Nacra Sailing factory item# 30413

PRINDLE RIGHT RUDDER CASTING

Rudder Lock Release Strap

Murrays Part# 56-4010

This is one of two plates used in each rudder assembly on a Prindle beach cat. This is part of the internal assembly that moves up and down as part of the rudder pull up/down system. The Prindle Rudder Lock Release Strap is works on all Prindles.

Nacra sailing factory item# 30415

Prindle Part# 4010

PRINDLE RUDDER LOCK RELEASE STRAP

Rudder Locking Bolt

Murrays Part# 56-4017

The Prindle Rudder Locking Bolt is the factory replacement bolt for rudder locking system on all Prindles.

Tip: Be sure to check for proper alignment of the lock bolt to spring bolt. Any bent component will prevent the system from working properly. Identify and replace the bent portion to get your rudder system functioning properly.

Performance Sports factory item# 4017

Prindle rudder locking system parts diagram. Lock bolt, half round load spreader, lock nut. Murrays.com

PRINDLE RUDDER LOCKING BOLT

Previous 1 … 40 41 42 43 44 … 57 Next

Recently viewed

In Stock