In Stock

In Stock

2397 products

    Everything Murrays Marine carries, all in one place.  Catamaran parts, Kiteboarding and wing foiling central. Use the filters on the side or the search up top to refine your search.

    2397 products
    Nacra Upper Countersunk Rudder Gudgeon Murrays Part# 56-32077 The original upper rudder gudgeon with countersunk screw holes. A replacement part for your standard Nacra rudder gudgeons. Does not combine with the new lower rudder systems.
    NACRA UPPER COUNTERSUNK RUDDER GUDGEON
    Murrays Sports
    Nacra Upper Pintle 570/580 Murrays Part# 56-1007 Upper pintle for Nacra 570 and 580 is Nacra Sailing factory item #30005.
    NACRA UPPER PINTLE 570/580
    NACRA
    NACRA UPPER RUDDER CASTING INSERT
    NACRA
    NACRA URETHANE TILLER TIE BAR ROD WITH STRING
    NACRA
    Vertical Pole Tang Murrays Part# 56-1045 The vertical pole tang is part of the Prindle 19MX Conversion Kit. Performance Sports factory item #1045 is limited to stock on hand.
    NACRA VERTICAL POLE TANG
    NACRA
    N5.2/5.5/5.8 Wide Gudgeon Murrays Part# 56-1010 Wide gudgeon fits Nacra 5.2, 5.5, 5.8 and 18-square Nacra Sailing factory item# 30006
    NACRA WIDE GUDGEON
    NACRA
    Nacra Wishbone Mast Rotator Murrays Part# 56-30315 The wishbone which connect to the mast base, this is where you attach the mast rotation. This is NOT for the quick release system
    NACRA WISHBONE MAST ROTATOR
    NACRA
    Rudder Pin Nacra, Prindle and H21 (Aluminum) Murrays Part# 001-5272 Aluminum rudder pins for Nacra, Prindle and Hobie® 21 measure 3/8" x 10-1/4" end-to-end, with hole at each end. Cotter pins are included. Sold in pairs
    NACRA/PRINDLE AND H21 ALUMINIUM RUDDER PIN
    Murrays Sports
    Rudder Pin Nacra, Prindle and H21 Stainless Steel Murrays Part# 001-5273 Long-wearing, weight-saving, hollow stainless rudder pins with strong, .065" wall provide reduced wear and the best long-term fit. These rudder pins measure 3/8" x 10-1/4" end-to-end with a hole at each end. They will fit Nacra, Prindle and Hobie® 21. Cotter pins are included. These pins are a replacement for Hobie® factory item #40880011 (sold individually). Sold in pairs
    NACRA/PRINDLE AND H21 SS RUDDER PIN
    Murrays Sports
    NACRA/PRINDLE BOLT FOR GUDGEON 1/4-20X1.25"
    NACRA
    Dolphin Striker Rod Washer Murrays Part# 56-F152 Washer for Prindle and Nacra dolphin striker rods. Performance Sports factory item# F152
    NACRA/PRINDLE DOLPHIN STRIKER ROD WASHER
    NACRA
    Front Boom End Cap Murrays Part# 56-7902 Front boom end cap for Nacra and Prindle cats. Nacra Sailing factory item# 30204
    NACRA/PRINDLE FRONT BOOM END CAP
    NACRA
    Rear Boom End Cap Murrays Part# 56-7903 Rectangular rear boom end cap casting for Nacra 5.2 and all Prindles. Nacra Sailing factory item# 30205
    NACRA/PRINDLE REAR BOOM END CAP
    NACRA
    NACRA and Prindle Rudder Spring Murrays Part# 56-4016 The NACRA and Prindle Rudder Spring is the rudder spring for all Prindle and most newer Nacras (Late Model US boats, Inters and all European NACRA boats) is Nacra Sailing factory item #30418. Fits Nacra 460, Nacra 500, Nacra 570, Nacra 16, Nacra 17, Nacra F18 Infusion, Nacra F20 Carbon and all Inters.
    ILLUSTRATED PRNDLE RUDDER PARTS LIST
    NACRA/PRINDLE RUDDER SPRING
    NACRA
    Trap Shock Cord: Nacra, Prindle, Sol Cat and Getaway Murrays Part# 001-8019 A trapeze shock cord is an absolute necessity because it keeps the trapeze system in place and ready for hook-up. One hook connects to either the thimble on the trapeze wire or the adjustment line, then runs under the tramp and connects to the other side in the same location. A plastic carbine hook is installed on one end only; the other hook is included to be installed after the shock cord is put on the boat. Cord is 1/4" d
    NACRA/PRINDLE/SOL CAT AND GETAWAY TRAP SHOCK CORD
    Murrays Sports
    Sale
    Naish Hero Kiteboard Murrays Part# 54-7525 The 2020 NAISH HERO 140×43 40CM is designed to take riders from their first reaches and beyond in this user-friendly freeride board. The Hero is not easily outgrown—nor is it only for beginners—the high flex Hero provides a smooth, forgiving ride and on-demand control that even the most experienced kiters love.
    NAISH HERO KITEBOARD 140cm
    Naish
    Save $340
    NAISH TORX T30 SCREW DRIVER
    Naish
    Naish/Core/F-One and Flysurfer Pump Adapter Murrays Part# 54-4411 The New PKS Universal V2 Valve adapter for Naish, Flysurfer, F-One, Core kites. Works with Reactor Valve, Speed 2.0 Valve, Free Flow Valve and Surelock Valves.
    NAISH/CORE/F-ONE AND FLYSURFER PUMP ADAPTER
    F-One
    NAPLES SABOT LINE RACE PACKAGE
    Misc
    NAPLES SABOT LINE STANDARD PACKAGE
    Misc
    NECK SEAL REPAIR KIT M/XL
    Murrays Sports
    Nicopress Oval 1/16" Copper/Zinc Murrays Part# 002-1020 Nicopress Oval- Locks wire rope to a thimble terminal. Close with an appropriate swaging tool for maximum strength. Each.
    NICOPRESS OVAL 1/16" COPPER/ZINC
    Misc
    Nicopress Oval 1/8" Copper/Zinc
    NICOPRESS OVAL 1/8" COP/ZNC
    Misc
    Nicopress Oval 3/32" Copper/Zinc Murrays Part# 002-1030 Nicopress Oval- Locks wire rope to a thimble terminal. Close with an appropriate swaging tool for maximum strength. Each. Use this page to order ovals with item numbers 002-1020, 002-1030, 002-1040 and 002-1050.
    NICOPRESS OVAL 3/32" COP/ZNC
    Misc
    Nicopress Oval 5/32" Copper/Zinc
    NICOPRESS OVAL 5/32" COPPER/ZINC
    Misc
    Non-Skid Tape 2"x15' This durable marine grade non-skid tape with embossed texture is designed for use on surfaces where non-slip traction is needed, such as on catamaran hulls. The marine-grade, durable tape is easy to apply. Just clean and dry surface, peel backing paper off tape and press firmly onto surface. *The white offers the more grip while the black has a less aggressive grip. Use this page to order Black or White Tape: 30-1532 White 30-1532BK Black
    Non-Skid Tape 2"x15' This durable marine grade non-skid tape with embossed texture is designed for use on surfaces where non-slip traction is needed, such as on catamaran hulls. The marine-grade, durable tape is easy to apply. Just clean and dry surface, peel backing paper off tape and press firmly onto surface. *The white offers the more grip while the black has a less aggressive grip. Use this page to order Black or White Tape: 30-1532 White 30-1532BK Black
    NON-SKID TAPE 2"x15'
    West Marine
    North/Duotone Valve Adapter Murrays Part# 54-4401 This pump hose adapter works on all non Duotone/North pumps and makes them work with Duotone and North kites and wings. This part has two little locking nubs on the sides that are used to help lock it in place on the end of your pump hose. In the event that you don't have that feature on your hose, you can cut them with a box cutter or other small sharp blade. Dontone kites and wings do not include a pump adapter
    NORTH/DUOTONE VALVE ADAPTER
    Duotone
    NSI RATCHET FOOTSTRAP-BLACK (PR)
    NSI
    NSI SURF PAD SYSTEM WITH INSERTS
    NSI
    NSI Surface Mount Strap Inserts Murrays Part# 54-9064 Set of four footstrap insert plates with specially formulated 3M peel-and stick adhesive for use on surface of surfboards and kiteboards. Includes screws.
    NSI SURFACE MOUNT STRAP INSERTS (4)
    NSI
    Nut 10-32 Nylock Low Profile Murrays Part# 50-8050211 Hobie factory low-profile Nylock 10-32 nut as used on EZ-Loc rudder assembly. Hobie Part# 8050211
    NUT 10-32 NYLOCK LOW PROFILE
    Hobie
    Nut 12-24 Nylock Hex Murrays Part# 50-8050421 Hobie® factory replacement 12-24 nylock hex nut is used on Hobie 20 Miracle rudder gudgeon. Hobie Part# 8050421
    NUT 12-24 NYLOCK HEX
    Hobie
    Nut 3/8-16 HX Nylock-LP Murrays Part# 50-8050540
    NUT 3/8-16" HX NYLOCK-LP
    Hobie
    NUT EYE RUDDER
    Murrays Sports
    Nut Hex MS #8-32 (White Nylon) Murrays Part# 19-2020WH White nylon #8-32 nut used for installation of ports.
    NUT HEX MS #8-32 (WH NYLON)
    Misc
    Nut Jam 9/16-18 Low Profile Murrays Part# 50-8050461 Hobie® factory replacement low-profile 9/16-18 jam nut is used on Hobie 17 dolphin striker. Hobie Part# 8050461
    NUT JAM 9/16-18" LOW PROFILE
    Hobie
    Nut Low Profile 5/16-24 Nylock Murrays Part# 50-8050341 Hobie® factory replacement 5/16-24 low-profile nylock nut. Used in Hobie 18SX wings mounting bar kit (#50-65071001). Hobie Part# 8050341
    NUT LOW PROFILE 5/16-24" NYLOCK
    Hobie
    Nut Nylock #10-24 Stainless Steel Thin Murrays Part#19-2510 Stainless hex nut with nylock insert will not rust or work loose if properly installed.
    NUT NYLOCK #10-24 (SS) THIN
    Misc
    Nut Nylock #10-32 Stainless Steel Thick Murrays Part# 19-2515 Mainsheet block replacement nut. The stainless hex nut with nylock insert will not rust or work loose if properly installed. Fits Hobie Main Traveler Car. Fits Hobie Tiller Hinge Screw. Fits Hobie Masthead Sheave Screw H16 Hobie Getaway Compare to Hobie Part Number 8050201
    NUT NYLOCK #10-32 (SS) THICK
    Misc
    Nut Nylock 1/2-13" Stainless Steel Thin Murrays Part# 19-2531 Thin stainless steel 1/2-13 hex nut with nylock insert will not rust or work loose if properly installed. Used on 1/2" pylon bolt on most older Hobie 16's (changed to 3/8" in 1994). Equivalent to Hobie #8050631.
    NUT NYLOCK 1/2-13 (SS) THIN
    Misc
    Recently viewed