In Stock

In Stock

2397 products

    Everything Murrays Marine carries, all in one place.  Catamaran parts, Kiteboarding and wing foiling central. Use the filters on the side or the search up top to refine your search.

    2397 products
    Nut Nylock 3/8-16" Stainless Steel Murrays Part# 19-2524 Stainless 3/8-16 hex nut with nylock insert will not rust or work loose if properly installed. Used on newer (1994) Hobie 16 pylon bolt. Hobie Part# 8050521
    NUT NYLOCK 3/8-16" (SS)
    Misc
    Nut Nylock 5/16-18 Low Profile Murrays Part# 50-8050331 Hobie® factory replacement low-profile 5/16-18 nylock nut.  Fits EZ Loc Upper and Lower Rudder Housing Hobie Bravo, Getaway and Wave. Hobie Part# 8050331
    NUT NYLOCK 5/16"-18 LOW PRO
    Hobie
    Nut Nylock 5/16-18 Stainless Steel Murrays Part# 19-2520 5/16-18 nylock nut is used on Hobie® rudders. The stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Compare to Hobie Cat® item #8050311 and 8050321 shroud anchor pin nut Used with Hobie Getaway Bow Tang Bolt
    NUT NYLOCK 5/16-18 (SS)
    Misc
    Nut Nylock 8mm Stainless Steel Murrays Part# 19-2522 Stainless hex nut with Nylock insert will not rust or work loose if properly installed.
    NUT NYLOCK 8mm (SS)
    Misc
    Nut Nylock Lo-Pro 1/4-20 Murrays Part# 50-8050101 Hobie® factory replacement low profile 1/4-20 nylock nut. Used on Hobie 14 and 16 gooseneck assembly. Hobie Part# 8050101
    NUT NYLOCK LOW PROFILE 1/4-20"
    Hobie
    Nut Nylock Low Profile 5/16-18" Murrays Part# 19-6030
    NUT NYLOCK LOW PROFILE 5/16-18"
    Misc
    NUT SQUARE 10-32 Murrays Part# 50-8051301 Hobie® factory replacement stainless steel 10-32 square nut can be used when mounting downhaul/halyard cleat on Hobie® 14 or 16. Also can be used for mounting H17 trampoline eye straps. Use 19-2910 screw. Hobie Part# 8051301
    NUT SQUARE 10-32
    Hobie
    Nut Stainless Steel 1/4-20" Centerlock Murrays Part# 50-8050121
    NUT STAINLESS STEEL 1/4-20" CENTERLOCK
    Hobie
    Used for tiller connection on Hobie Cats®. The stainless 1/4-20 stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Equivalent to Hobie #8050111. Also Equivalent to Nacra/Prindle F123 gudgon nut for all Prindle and older Nacras. Applications: Hobie 18 / H18: Bow Tang Nut Qty: 6 Rudder Adjustment: 1 Hobie Getaway: Forestay Yoke Nut
    NYLOCK NUT 1/4-20 SS
    Misc
    1/2 BALL (NYLON) - Hobie half round washer spacer tiller connector - Hobie part number 11510000 HOBIE HALF SPHERE TILLER CONNECTOR
    Tiller Connection Kit Murrays Part# 001-2061 The Murrays Tiller Connection Kit assures consistent rudder alignment through the full rudder sweep. Spring-loaded half balls and contoured spacers take the slop out of the tiller-to-crossbar connection on Hobie Cats. Racing class legal. Each kit contains 2 connectors to join the tiller crossbar to the tiller arms. Compare to Hobie Cat® #3052. Applications:; Hobie 14, 16, 17, 18, 18SX
    NYLON 1/2" BALL
    Murrays Sports
    Nylon Port Fastener Kit The Port Nylon Fastener Kit includes all the necessary nylon fasteners (screws, washers and nuts) plus marine silicone sealant for the installation of two access ports, also known as hatches, on to a catamaran like a Hobie, Nacra or Prindle. Use this page to order: 001-1159 White 001-1160 Black
    NYLON PORT FASTENER KIT
    Murrays Sports
    Rope Lock (Nylon) Murrays Part# 001-0120 Easy-to-adjust black rope lock commonly used for trapeze height adjustment. Standard rope stop on Hobie®, Nacra and Prindle. Double-up back-to-back for extra strength. Hobie part number 61530000 for this rope lock. Works on 3/16 to 1/4" line
    NYLON ROPE LOCK
    Murrays Sports
    O'PEN SKIFF 4.5M RIG COMPLETE-PROMO
    Tahe Outdoors
    O'Pen Skiff Boom Fork Murrays Part# 65-31328 Front fork for the O'pen boom Tahe Part# 31328
    O'PEN SKIFF BOOM FORK
    Tahe Outdoors
    O'Pen Skiff Cunningham Assembly Complete Murrays Part# 65-53289 Complete Cunningham hoist / downhaul. Includes line and pulleys Tahe Part# 53289
    O'PEN SKIFF CUNNINGHAM ASSEMBLY COMPLETE
    Tahe Outdoors
    O'pen Skiff Daggerboard Murrays Part# 65-31785 ​O’pen Skiff Daggerboard replacement. Tahe Part# 31785
    O'PEN SKIFF DAGGERBOARD
    Tahe Outdoors
    O’Pen Skiff Daggerboard Retaining Loop Murrays Part# 65-533322 Elastic loop + plastic hook to keep the fin in place What O’Pen says about the Skiff: For fun, recreation, perfection and racing! The O’pen BIC sailing dinghy is a breath of fresh air for junior sailing. Based on a modern skiff concept, the O’Pen BIC is very fast, very simple, and very FUN to sail! The self-bailing open transom hull is rapid and responsive, with a modern rig that’s rugged and versatile.
    O'PEN SKIFF DAGGERBOARD RETAINING LOOP
    Tahe Outdoors
    O’Pen Skiff Dolly Wheel Murrays Part# 65-31761 Replacement Dolly Wheel for the O’Pen skiff Dolly. Tahe Part# 31761
    O'PEN SKIFF DOLLY WHEEL
    Tahe Outdoors
    O'Pen Skiff Drain Plug Housing Murrays Part# 65-53264 Drain plug support Tahe Part# 53264
    O'PEN SKIFF DRAIN PLUG HOUSING
    Tahe Outdoors
    O'Pen Skiff Drain Plugs Pk (10) Murrays Part# 65-30978 Pack of 10 of drain plugs for all Bic/Tahe Tahe Part# 30978
    O'PEN SKIFF DRAIN PLUGS
    Tahe Outdoors
    O'Pen Skiff Front Towing Handle Murrays Part# 65-52789 This is a replacement bow handle for the O'Pen Skiff. Fits O'Pen Bic or O'Pen Skiff sailboats. Tahe Part# 52789
    O'PEN SKIFF FRONT TOWING HANDLE
    Tahe Outdoors
    O’Pen Skiff Hiking Strap Murrays Part# 65-53263 Padded booster strap What O’Pen says about the Skiff: For fun, recreation, perfection and racing! The O’pen BIC sailing dinghy is a breath of fresh air for junior sailing. Based on a modern skiff concept, the O’Pen BIC is very fast, very simple, and very FUN to sail! The self-bailing open transom hull is rapid and responsive, with a modern rig that’s rugged and versatile.
    O'PEN SKIFF HIKING STRAP
    Tahe Outdoors
    O’Pen Skiff Mainsheet Block O’Pen Skiff Mainsheet Block for the O’Pen Skiff. Formerly known as the  O’Pen Bic. O’Pen OEM part # 31330.
    O'PEN SKIFF MAINSHEET BLOCK
    Tahe Outdoors
    O'Pen Skiff Mainsheet Deck Mount Eye Strap Murrays Part# 65-53262 Trigger for hooking up the main sail block. Fixed to the bottom of the boat Tahe Part# 53262
    O'PEN SKIFF MAINSHEET DECK MOUNT EYE STRAP
    Tahe Outdoors
    O’Pen Skiff Mainsheet Ratchet Block The O’PEN SKIFF MAINSHEET RATCHET BLOCK is the OEM replacement block for the O’Pen Skiff. Formerly known as the  O’Pen Bic. O’Pen Skiff part # 31331.
    O'PEN SKIFF MAINSHEET RATCHET BLOCK
    Tahe Outdoors
    O'Pen Skiff Mainsheet Red Murrays Part# 65-31562 Polyamide mainsheet sheet, 8mm diameter Tahe Part# 31562
    O'PEN SKIFF MAINSHEET RED
    Tahe Outdoors
    O'PEN SKIFF MAST 390cm
    Tahe Outdoors
    O'Pen Skiff Pads Set Murrays Part# 65-100038 The O’Pen Skiff Pads Set for the O’Pen Skiff
    O'PEN SKIFF PADS SET
    Tahe Outdoors
    O'PEN SKIFF PROMO DOLLY
    Tahe Outdoors
    NEW O'Pen Skiff Rudder Assembly Murrays PN 65-31784 O'Pen OEM part #31784 The NEW O'Pen Skiff Rudder Assembly for the O'Pen Skiff. The O'pen Skiff is formerly known as the O'Pen Bic. The NEW rudder assembly which was released in the August of 2025 has been redesigned to break less tiller end plugs and last longer. You can spot the difference in the rudder housing as it sits against the transom of the boat. The new version has a smaller gap between the rudder housing and the transom. It also feathers a l
    NEW O'Pen Skiff Rudder Assembly Murrays PN 65-31784 O'Pen OEM part #31784 The NEW O'Pen Skiff Rudder Assembly for the O'Pen Skiff. The O'pen Skiff is formerly known as the O'Pen Bic. The NEW rudder assembly which was released in the August of 2025 has been redesigned to break less tiller end plugs and last longer. You can spot the difference in the rudder housing as it sits against the transom of the boat. The new version has a smaller gap between the rudder housing and the transom. It also feathers a l
    O'PEN SKIFF RUDDER ASSEMBLY - NEW
    Tahe Outdoors
    O'Pen Skiff Rudder Mount Bottom Murrays Part# 65-53269 Lower stainless steel needle Tahe Part# 53269
    O'PEN SKIFF RUDDER MOUNT BOTTOM
    Tahe Outdoors
    O'Pen Skiff Rudder Mount Top Murrays Part# 65-53270 Upper stainless steel needle Tahe Part# 53270
    O'PEN SKIFF RUDDER MOUNT TOP
    Tahe Outdoors
    O’Pen Skiff Tiller Clam Cleat Murrays Part# 65-31650 Package of 10 O’Pen Skiff Tiller Clam Cleat
    O'PEN SKIFF TILLER CLAM CLEAT (PK 10) (Discontinued)
    Tahe Outdoors
    O'Pen Skiff Tiller End Plug Murrays Part# 65-31697 This part commonly fails in the rudder housing and fractures out of the assembly, causing the rudder to be very sloppy or fall of the boat. The earlier boats used rivets, latter boats used screws and nuts. This pack of ten is great for a fleet. If you have a fleet and are struggling with these issues, consider the Solid Murrays Tiller End Plug upgrade.
    O'PEN SKIFF TILLER END PLUG (10PK)
    Tahe Outdoors
    O’Pen Skiff Tiller End Plug Murrays Upgrade Murrays Part# 65-316970 The O’Pen Skiff Tiller End Plug Murrays Upgrade is the solution to a weak point on the O’Pen Skiff boat. This upgrade replaces the two standard tiller end plugs that go on each pintle. Only two are required instead of four because the Murrays Tiller end plug is solid and spans the whole distance inside the rudder housing. So you don't need two per pintle only per rudder.
    O'PEN SKIFF TILLER END PLUG (MURRAYS UPGRADE)
    Murrays Sports
    O'Pen Skiff Tiller Extension 70cm Murrays Part# 65-31695 Stick of 70 cm for the O'pen Skiff. Non-slip coating. Tahe Part# 31695
    O'PEN SKIFF TILLER EXTENTION 70CM
    Tahe Outdoors
    O'Pen Skiff Top Cover Murrays Part# 65-102557 O'pen Skiff deluxe deck cover with ultraviolet protection Technical Specs:  Country of manufacture: China Material: Polyester Outside face material: Polyester Foam Thickness 3 mm Length 9'0" / 275 cm Tahe Part# 102557
    O'PEN SKIFF TOP COVER
    Tahe Outdoors
    O'Pen Skiff Transom Rudder Clip SS Murrays Part# 65-101327 This is the transom clip that holds the rudder assembly onto the back of an O'Pen skiff sailboat. This is a more substantial part than what was found on the earlier O'Pen Bic sailboats. Replace or upgrade your rudder clip today! Tahe Part# 101327
    O'PEN SKIFF TRANSOM RUDDER CLIP SS
    Tahe Outdoors
    O-Ring 5" Screw-In Murrays Part# 001-1171OR This is an approximate replacement for Viking Port O-Rings for 5" ports.
    O-RING 5" SCREW-IN
    MISC
    O-Ring: 4" Screw-In Port Murrays Part# 001-1161OR This is an approximate O-Ring for Viking Marine 4" ports.
    O-RING: 4" SCREW-IN PORT
    Sea Dog
    Recently viewed