In Stock

In Stock

2396 products

    Everything Murrays Marine carries, all in one place.  Catamaran parts, Kiteboarding and wing foiling central. Use the filters on the side or the search up top to refine your search.

    2396 products
    NACRA MAIN HALYARD HOOK SWIVEL
    NACRA
    Nacra Main Halyard Ring with Shackle Murrays Part# 56-30312 This shackle connects your Mainsail on your mast, it's knotted on your main halyard. It takes your Mainsail through the slot of your mast to the top where it connects with the Mainsail hook.
    NACRA MAIN HALYARD RING WITH SHACKLE
    NACRA
    NACRA MAINSAIL FEEDER
    NACRA
    Nacra Mainsail Swivel Halyard Hook Murrays Part# 56-31741 Main halyard hook swivel to be used for the Nacra 15, F16 MKII and Nacra 17.
    NACRA MAINSAIL SWIVEL HALYARD HOOK
    NACRA
    Mast Ball 1.5" (Nylon) Murrays Part# 56-2504 This larger mast ball for post-1983 Nacras. Ball measures 1-1/2" diameter with a 9/16"-18 threaded hole. Nacra Sailing factory item# 30338
    NACRA MAST BALL 1.5" (NYLON)
    NACRA
    Mast Base Casting Murrays Part# 56-6605 Factory replacement mast base casting for Nacras except those with a carbon mast. Nacra Sailing item# 30177
    NACRA MAST BASE CASTING
    NACRA Austrailia
    NACRA MAST CAUTION LOGO STICKER
    NACRA
    Mast Head Casting Murrays Part# 56-6002 Mast head casting for Prindle 16 and Escape Nacra Sailing factory item# 30439
    NACRA MAST HEAD CASTING
    NACRA
    Nacra Mast Head Casting Murrays Part# 56-6602 Nacra mast head casting is for Nacra Models 5.0/5.2/5.5/5.7/5.8/6.0/18SQ Nacra Sailing factory item# 30176
    NACRA MAST HEAD CASTING
    NACRA Austrailia
    Mast Head Casting With Wire Halyard Murrays Part# 56-6552 Performance Sports factory Nacra mast head casting for early Nacras that had wire main halyards.
    NACRA MAST HEAD CASTING WITH WIRE HALYARD
    NACRA
    NACRA MAST HEAD SHEAVE - 30185
    NACRA MAST HEAD SHEAVE
    Murrays Sports
    MAST HINGE PIN NACRA/H17/20 Murrays Part# 56-F158 The mast base engages the mast ball and is secured by this headless clevis pin to allow the mast to be safely raised or lowered. Specs: 1/4" diameter x 2-3/8" overall length with a grip length of 1-15/16" Compatibility: Nacra Inter, F18, N15, F17, 4.5/450, 5.0, 5.2, 5.5SL, 5.7, 5.8NA, 6.0NA, 5.5UNI and 18SQ, as well as Hobie 17, Tiger and 20. Split rings are sold separately. Compare to Hobie Cat part number 50406301.
    NACRA MAST HINGE PIN
    NACRA
    Mast Over Rotator Murrays Part# 56-9866 This is the big wish bone rotator that goes out in front of the mast. Most have been removed or retrofitted, but we have a couple left if you're hunting for one! Nacra part# 9866
    NACRA MAST OVER ROTATOR
    NACRA
    NACRA MAST ROTATOR WISHBONE BARE
    NACRA
    Snuffer Hoop Mid Pole Murrays Part# 56-9710 A snuffer funnels the spinnaker into the sock to facilitate launching and retrieval, even while sailing a triangular course. Keeps the tramp clean. This fiberglass Euro mid-pole ring attaches to spinnaker pole to guide the spinnaker in and out of the sock. 1.5"
    NACRA MID POLE SNUFFER HOOP
    NACRA
    New-Style 1003 Doubler Plate Murrays Part# 56-1013 New-style doubler plate for Inter #56-1003 Performance Sports factory item #1013
    NACRA NEW STYLE 1003 DOUBLER PLATE
    NACRA
    Nacra Mast Ball 1-1/4" Old (Nylon) Murrays Part# 56-C601 This is the smaller, 1-1/4" mast ball for older, pre-1983 Nacra 5.0, 5.2 and 5.8. Hole diameter is 1/2".
    NACRA NYLON MAST BALL 1-1/4" OLD STYLE
    NACRA
    NACRA OWNERS MANUAL
    Murrays Sports
    Pintle Bolt Inter Murrays Part# 56-F161 Pintle bolt for all Nacra Inter Performance Sports factory item #F161.
    NACRA PINTLE BOLT
    NACRA
    Nacra Pivmatic Assembly with Pin: Aluminum Cleat Murrays Part# 56-0266-1 Positive, reliable and easy to install. Nacra rudders automatically kick up on contact with submerged objects with this rudder release fitting. This upgraded Pivmatic assembly has a heavy-duty aluminum cleat that is not as susceptible to wear and stripping as plastic. Complete kit for one side as shown.
    NACRA PIVMATIC ASSEMLY WITH PIN: ALUMINUM CLEAT
    NACRA
    Nacra PVC Ball Carbon Tiller Extension Murrays Part# 56-32460
    NACRA PVC BALL CARBON TILLER EXTENSION
    NACRA
    Nacra Rear Beam Tramp Tie Buttons Murrays Part# 56-30883 The NACRA Rear Beam Tramp Tie Buttons are the black nubs that are riveted on to the rear beam to hook the tramp lacing around. These are used on many boats and are installed with a 3/16 1/2" rivet. These can likely also be used on a Hobie Getaway, Miracle 20 or others that are looking to use a smaller Dyneema line instead of the 3/16 or 5/32 line Nacra Part# 30883
    NACRA REAR BEAM TRAMPOLINE TIE BUTTONS
    NACRA
    Rear Crossbar Bolt 3/8-16X4.5 Hex Head Murrays Part# 56-F181 Rear crossbar bolt for Inters, Nacra 460, Nacra 500, Nacra 570, Nacra 16, NACRA 17, Nacra F18 Infusion, Nacra F20 Carbon, Nacra F20 Carbon FCS. Performance Sports factory item# F181
    NACRA REAR CROSSBAR BOLT 3/8-16X4.5"
    NACRA
    NACRA REAR CROSSBAR CASTING END CAP-LEFT
    NACRA
    Rear Crossbar Casting End Cap-Right Murrays Part# 56-3525 Nacra Inter Endcap Casting-Right Fits all Inters Inter 18 Inter 20
    NACRA REAR CROSSBAR CASTING END CAP-RIGHT
    NACRA
    Nacra Ring Murrays Part# 56-30702 Details: 3x20mm Stainless Steel
    NACRA RING
    NACRA
    Nacra Rudder Adjustment Eye Nut Murrays Part# 56-F187 This is the lock nut for the adjustment eye on the top of the rudder castings. Infusions MKiii rudder castings stopped using these eyes. Boats sold/ purchased after the release of the F18inf MKiii likely don't have that eye, and so this lock nut is not appropriate. Rudder adjustment eye nut for all Inters is Nacra Sailing factory item #30363. Fits Nacra 460, 500, 570,16,17, F18 Infusion and F20 Carbon
    NACRA RUDDER ADJUSTMENT EYE NUT
    NACRA
    Rudder Blade Murrays Part# 56-30131 Nf18inf, F20C, N17 and MKi
    NACRA RUDDER BLADE
    NACRA
    Nacra Rudder Blade Cushion Use these cushions to trim your rudder blades in the casting.
    NACRA RUDDER BLADE CUSHION
    NACRA
    Rudder Bolt Murrays Part# 56-F184 Upper rudder bolt for all Inters. Nacra Sailing factory item# 30362
    NACRA RUDDER BOLT
    NACRA
    Rudder Bolt Base Inter Murrays Part# 56-F188 1/4-20 x 2" FHMS rudder bolt (base) for all Nacra Inters.
    NACRA RUDDER BOLT BASE
    NACRA
    NACRA RUDDER CASTING LOWER BOTTOM INSERT
    NACRA
    Nacra Rudder Casting Lower Eye Screw Wide Murrays Part# 56-31706 Rudder casting lower eye screw wide
    NACRA RUDDER CASTING LOWER EYE SCREW WIDE
    NACRA
    Nacra Rudder Casting Lower MKii Murrays Part# 56-40100-3
    NACRA RUDDER CASTING LOWER MKII
    NACRA
    NACRA RUDDER CASTING LOWER TOP INSERT
    NACRA
    Rudder Cheek Casting Murrays Part# 56-4501 This rudder casting from Nacra Australia is an improvement over original equipment. A nylon insert reduces contact of the rudder and casting, resulting in smooth rudder pivoting. The casting includes a built-in roller for the rudder pull-down line that reduces friction, plus replaceable nylon inserts for the rudder pins to reduce wear on the casting. Fits all Nacras (4.5, 5.0, 5.2, 5.5SL, 5.7, 5.8NA, 6.0NA, 5.5UNI, 18SQ). Nacra Sailing factory item# 30107
    NACRA RUDDER CHEEK CASTING
    NACRA
    NACRA RUDDER COVER
    NACRA
    Rudder Eye Screw Wide With Bushing Murrays Part# 56-32055 The screw which is fitted in your lower casting (Until MK2), this screw including the bushing can be adjusted for the rake of the rudder.
    NACRA RUDDER EYE SCREW WIDE WITH BUSHING
    NACRA
    Rudder Gudgeon Murrays Part# 56-1016 Rudder gudgeon for Prindle 15, 16 and 18 Nacra Sailing factory item# 30993
    NACRA RUDDER GUDGEON
    NACRA
    Nacra Rudder Hold Down Murrays Part# 56-30002 This part secures the lower rudder casting to the transom of most Nacra Catamarans. The small plate on both sterns which secures your lower rudder casting on the gudgeons, without it your rudders won't stay on all right. Nacra Part# 30002
    NACRA RUDDER HOLD DOWN
    NACRA
    Recently viewed